1991 BMW 325is Suspension Parts
More 1991 BMW 325is Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1991 BMW 325is, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1991 BMW 325is Suspension Parts
Rein – Strut Mount (Part No.AVQ0371R)
from
$69.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
- All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance
Whiteline – Control Arm Lower Outer Bushing (Part No.W62622)
from
$58.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Elring – Shock / Strut Paper Mount Gasket (Part No.L4017263905ELR)
from
$2.06
The Elring Shock / Strut Paper Mount Gasket is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets or exceeds OEM specifications
KYB – Jounce Bumper and Bellows (Part No.SB105)
from
$32.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
APA/URO Parts – Strut Bump Stop (Part No.L303677948APA)
from
$11.79
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
Whiteline – Spring Pad Lower Bushing (Part No.W72043)
from
$34.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Lemfoerder – OE Replacement Trailing Arm Bushing (Part No.L2006238599LEM)
from
$25.21
The Lemfoerder Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Rare Parts – Cross Axis Bushing (Part No.RP19252)
from
$98.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Promotes proper alignment and tire wear
- Restores ride quality
- Direct OE replacement
- No Squeak
APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007266124APA)
from
$10.60
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Coil Spring Shim (Part No.L5007317759APA)
from
$18.26
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Shock Mount (Part No.L401051096LEM)
from
$21.33
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mounts and fasteners
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Corteco – Corteco Shock Mount (Part No.L401019622CFW)
from
$20.95
The Corteco Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5947)
from
$48.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Bilstein – B8 Performance Plus – Shock Absorber (Part No.L4000396551BIL)
from
$191.34
Finish: Yellow Paint Bilstein B8 Performance Plus shock absorbers and struts deliver absolute mastery of the road surface for the performance-minded driver. Designed to push a car’s suspension to its performance peak, these shocks are specifically suited for use with special lowering springs in combination with anti-sway bars or other suspension upgrades.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- High-performance shock absorbers and struts designed specifically for lowering springs and production sport vehicle
- Sport-tuned with a high level of comfort
- Precision handling and optimized vehicle control
- Road-tested and fine-tuned by BILSTEIN The increased performance and aggressive valving of the Bilstein B8 Sport shocks significantly increase the rigidity of the vehicle and is not recommended for drivers who wish retain ride quality.
KYB – Jounce Bumper and Bellows (Part No.SB112)
from
$24.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
- Designed And Built Specifically For Bows
KYB – Jounce Bumper and Bellows (Part No.SB114)
from
$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)
from
$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).
Product Features:
See More
Product Features:
- Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
- Formulated to help prevent gear wear and protect against rust and corrosion
- Formulated to deliver enhanced protection against deposits
- Helps provide better protection during extreme operating conditions
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Whiteline – Brace Strut Tower (Part No.KSB536)
from
$180.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000396623BIL)
from
$166.35
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457510BIL)
from
$185.23
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457509BIL)
from
$186.86
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Rare Parts – Control Arm (Part No.RP12454)
from
$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Dorman – Suspension Control Arm (Part No.522-222)
from
$45.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Lemfoerder – OE Replacement Suspension Wishbone (Part No.L2000239047LEM)
from
$56.34
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Monroe – Strut-Mate Shock Mounting Kit (Part No.901965)
from
$31.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Popular 1991 BMW 325is Suspension Parts Categories
1991 BMW 325is Suspension Parts
You count on your 1991 BMW 325is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 37 Suspension Parts ranging in price from $2.06 to $180.99, you’re sure to find everything you need for your 1991 BMW 325is.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 13 different brands like Valvoline, Moog, and Monroe. 1991 BMW 325is Suspension Parts start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 94 extensive product reviews on 1991 BMW 325is Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Mounting Kit with 5.0 stars and High Pressure Monotube Gas Shock with 5.0 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1991 BMW 325is below to get started!
Top-Rated Suspension Parts Brands For Your 1991 BMW 325is
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 BMW 325is running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Monroe, and even more.
Popular Valvoline Suspension Parts
You’ll find popular Valvoline brand products across Air Suspension and Kits. All are waiting to get your 1991 BMW 325is back on the road. Some of the top-rated Valvoline products in these categories are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1991 BMW 325is, and some of our most reviewed Monroe parts include:
FAQs for 1991 BMW 325is Suspension Parts
What are the most purchased Suspension Parts for the 1991 BMW 325is?
Out of 37 Suspension Parts for the 1991 BMW 325is, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 1991 BMW 325is Suspension Parts?
Top-rated Suspension Parts for your 1991 BMW 325is based on customer reviews/ratings are:
from
$61.99
(1)
High Pressure Monotube Gas Shock
“I have purchased KYB shocks before and have liked the upgrade from stock. The shocks give a good ride without being too soft they also are stiff enoug”
from
$32.49
(1)
Jounce Bumper and Bellows
“Guessing product actually a universal fit. Had to remove strut and use old bumper. Kit needs a retainer cable/clamp to secure bellows to top mount.”
