1991 BMW 325is Belts and Hoses

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 22439
Price: 37.49 USD

Below you will find various in-demand BMW Belts and Hoses, components and accessories for your 1991 325is. Advance Auto Parts has popular 325is parts like Engine Cooling Hoses, Radiator Hoses, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other 325is model years including 1987, 1988, 1989, 1990, 1992, 1993, 1994, 1995 and more. Select a category of 1991 BMW 325is Belts and Hoses below and start saving instantly.

Popular 1991 BMW 325is Belts and Hoses Categories

Essential Belts and Hoses for 1991 BMW 325is

from

$37.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specially designed to resist collapse in a vacuum
Designed to withstand electrochemical degradation, the leading cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$27.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically designed materials resist collapse under vacuum
Designed to withstand electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transportation applications.

from

$30.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$15.99

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$30.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for improved leak resistance
Their great flexibility makes installation easy
Maximum vehicle coverage with minimal inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$14.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$28.99

Improved sealing surface for increased leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$16.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$63.99

Our front end auxiliary drive (FEAD) solutions ensure outstanding vibration damping in the smallest of installation spaces in today¿s high-load engines. Besides offering a complete selection of individual components, individually-assembled FEAD kits allow holistic maintenance that help avoid secondary damages.

from

$29.99

This Litens pulley is manufactured by the original equipment part supplier to ensure proper fit and performance. This pulley is produced for BMW serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. As with the original equipment part, this replacement part is made in Germany using the O.E. specified design and meets all performance and durability requirements. Proper installation is ensured by the inclusion of a locator pin molded onto the engine side of the idler. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.
80mm O.D.; 10.2mm I.D.; 24.5mm width; smooth running surface; Thermoplastic.

from

$32.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$23.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$14.29

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$14.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$26.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$12.79

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$15.99

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$42.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$11.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$27.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$10.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$8.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

Upgrade your 1991 BMW 325is with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1991 BMW 325is, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Belts and Hoses are key to keeping your 325is functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Belts and Hoses for the 1991 BMW 325is, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1991 BMW 325is at great prices. Our Belts and Hoses inventory for this model ranges from just $4.99 to $63.99, with an average price of $19.06. Our 19 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 1991 BMW 325is without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 BMW 325is, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco DriveWorks, and more. Dayco Belts and Hoses start at just $14.99 and boast an impressive 4.5 stars average rating from customers. With 13 customer reviews and counting, our 1991 BMW 325is Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 BMW 325is is always ready to roll. We’re committed to providing you with everything you need to keep your 325is in top shape, all in one place. Start shopping confidently below for your 1991 BMW 325is!

Best-Selling Engine Cooling Hoses for 1991 BMW 325is

Enhance the driving experience in your BMW with 4 quality Engine Cooling Hose components, starting at $14.99.

show more show less

from

$14.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically designed materials resist collapse under vacuum
Designed to withstand electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transportation applications.

from

$23.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Top Picks for 1991 BMW 325is Heater Hoses

Upgrade BMW 325is with top-quality Heater Hoses parts, including 2 OEM and aftermarket selections for your 1991 model.

show more show less

from

$23.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$32.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

In-Demand Serpentine and V Belts for 1991 BMW 325is

Select from 7 premium Serpentine and V Belts parts for your 1991 BMW 325is, with prices ranging from $4.99 to $26.49.

show more show less

from

$15.49

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$14.29

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$12.79

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$26.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

Most Sold 1991 BMW 325is Pulleys

Explore our best-selling BMW parts for the 1991 325is among 1 OEM and aftermarket options starting from $63.99.

show more show less

from

$63.99

Top-Rated Belts and Hoses Brands For Your 1991 BMW 325is

Shop for the best-rated brands offering Belts and Hoses and other products for your 1991 BMW 325is. Below you’ll find some of our best rated Belts and Hoses from Dayco and DriveWorks, and more. Belts and Hoses from these brands that fit a 1991 325is start at just $5.29 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1991 BMW 325is Belts and Hoses

When it comes to maintaining or upgrading your 1991 BMW 325is, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1991 BMW 325is. With over 2 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $15.24. Plus, with over 7 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.99

(1)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50" Long, 1.31" Diameter

“A serviceable, affordable replacement part. Required trimming to fit properly, but that is common for aftermarket hoses, and allows you to tailor to ”

from $15.49

(6)

Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality

“Great belt. Much better than the average “V” belt. Fit great, looks great and anticipating it will last a long time.”

Popular DriveWorks 1991 BMW 325is Belts and Hoses

DriveWorks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1991 BMW 325is owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1991 325is, Advance Auto Parts carries a full inventory of 2 DriveWorks Belts and Hoses. Plus you will be keeping your BMW in peak condition while saving money because prices on these DriveWorks Belts and Hoses range from $5.29 to $5.49, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $5.49

(3)

Automotive V-Belt, Driveworks

“Perfect fit”

from $5.29

(2)

Automotive V-Belt, Driveworks

“good item for the price”

FAQs for 1991 BMW 325is Belts and Hoses

Which Belts and Hoses are best-sellers for 1991 BMW 325is?

Out of 19 Belts and Hoses that fit 1991 BMW 325is, the following parts are the top sellers:

Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (3300019) – $14.29
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (5198445) – $23.49
Bottom Cog V-Belt; 32 Inch Long, Exact Fit Premium Quality (3300087) – $12.79

What’s the price range for 1991 BMW 325is Belts and Hoses?

Belts and Hose prices for the 1991 BMW 325is start at $4.99 and go up to $63.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1991 BMW 325is?

The average price for Belts and Hoses for the 1991 BMW 325is is $19.06. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other BMW 325is model years?

Yes, we currently carry Belts and Hoses for 7 model years of BMW 325is between 1987 and 1995. Belts and Hoses are bought most frequently for the following model years: 1995, 1994, 1993, 1992, 1990, 1989, 1988, and 1987.

What are the cheapest Belts and Hoses for my 1991 BMW 325is?

The cheapest 1991 BMW 325is Belts and Hoses we carry in stock are:

Automotive V-Belt, Driveworks (5060982) – $4.99
Automotive V-Belt, Driveworks (5060117) – $5.29
Automotive V-Belt, Driveworks (5060214) – $5.49
Water Hose (11324541) – $8.99
Water Hose (11325210) – $10.99

What are the top-rated Belts and Hoses that fit the 1991 BMW 325is?

Out of 13 reviews by customers, our 1991 BMW 325is Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1991 BMW 325is and their top-rated products:

Serpentine and V Belts
- Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (3300032) – $15.49
- Automotive V-Belt, Driveworks (5060117) – $5.29
- Automotive V-Belt, Driveworks (5060214) – $5.49

What types of Belts and Hoses do you sell for my 1991 BMW 325is?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1991 BMW 325is:

Can I get help with 1991 BMW 325is Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Belts and Hoses and more.

What is your return policy for BMW 325is Belts and Hoses?

Advance Auto Parts keeps returns simple. For new BMW 325is Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1991 BMW 325is Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.22439)

Gates – Premium Molded Coolant Hose (Part No.21498)

Gates – Premium Molded Coolant Hose (Part No.20701)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.B71664)

Rein – Radiator Hose (Part No.CHR0016R)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25251)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50" Long, 1.31" Diameter (Part No.A71439)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25257)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.44" Diameter (Part No.C71266)

INA US – Engine Timing Idler (Part No.FP04181)

Litens – Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter (Part No.900003A)

Gates – Premium Molded Coolant Hose (Part No.22088)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Dayco – Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (Part No.15330)

Driveworks – Automotive V-Belt, Driveworks (Part No.33013)

Dayco – Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality (Part No.17325)

Driveworks – Automotive V-Belt, Driveworks (Part No.38015)

Driveworks – Automotive V-Belt, Driveworks (Part No.32517)

Gates – Automotive XL High Capacity V-Belt (Part No.9325)

Dayco – Bottom Cog V-Belt; 32 Inch Long, Exact Fit Premium Quality (Part No.17320)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.C71663)

Gates – Premium Molded Coolant Hose (Part No.21496)

Rein – Water Hose (Part No.CHE0259P)

Gates – Premium Molded Coolant Hose (Part No.22440)

Rein – Radiator Hose (Part No.CHR0014R)

Rein – Water Hose (Part No.CHE0162R)

Rein – Water Hose (Part No.CHE0249R)

Rein – Water Hose (Part No.CHE0245R)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50" Long, 1.31" Diameter (Part No.A71439)

Gates – Premium Molded Coolant Hose (Part No.20701)

Gates – Premium Molded Coolant Hose (Part No.21886)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.44" Diameter (Part No.C71438)

Rein – Water Hose (Part No.CHE0155R)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.44" Diameter (Part No.C71266)

Rein – Water Hose (Part No.CHE0259P)

Rein – Water Hose (Part No.CHE0249R)

Rein – Water Hose (Part No.CHE0245R)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Gates – Premium Molded Coolant Hose (Part No.22088)

Dayco – Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (Part No.15380)

Driveworks – Automotive V-Belt, Driveworks (Part No.33013)

Driveworks – Automotive V-Belt, Driveworks (Part No.38015)

Driveworks – Automotive V-Belt, Driveworks (Part No.32017)

Dayco – Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (Part No.15330)

Dayco – Bottom Cog V-Belt; 32 Inch Long, Exact Fit Premium Quality (Part No.17320)

Gates – Automotive XL High Capacity V-Belt (Part No.9325)

INA US – Engine Timing Idler (Part No.FP04181)