Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.25" Long, 1.44" Diameter
Brand: Dayco
SKU: C71438
Price: 14.99 USD

from

$14.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$23.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$39.00

Hose – Vacuum

from

$43.18

Vacuum Hose

from

$3.20

Clamp – Hose

from

$278.59

HOSE – FUEL

from

$16.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$3.84

Clamp – Hose

from

$26.00

Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Rubber Hanger and Bracket

from

$18.29

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$11.40

All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$32.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$9.57

All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$11.75

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$26.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$14.29

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$38.49

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$42.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$30.49

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$27.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$10.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$67.75

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$15.90

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$13.40

Elaplast brand engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Elaplast line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$19.57

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$6.99

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features: