1991 BMW 318is Wheels and Tires
More 1991 BMW 318is Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1991 BMW 318is, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1991 BMW 318is Wheels and Tires
Dorman – Wheel Stud (Part No.O8060833270DOR)
from
$37.41
Wheel Stud
FAG – Wheel Bearing (Part No.K8000240732FAG)
from
$61.71
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
FAG – Wheel Bearing (Part No.K8000458760FAG)
from
$68.08
Wheel Bearing
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513106)
from
$48.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Dorman – Pik-a-Nut – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack (Part No.98537.1)
from
$4.29
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each) (Part No.610-367)
from
$3.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
Rein – Wheel Bolt (Part No.HWB0009)
from
$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.
Product Features:
See More
Product Features:
- Wheel bolt is produced by an OE manufacturer
- Packaged in convenient quantities.
- Direct replacement for correct fitments
- Manufactured to strict engineering standards/specifications in materials and tolerances
McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179)
from
$344.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
SKF – Wheel Hub Assembly (Part No.K7001463242SKF)
from
$143.26
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.951-851)
from
$73.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.513111)
from
$113.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG® hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Application specific design
FAG US – WHEEL BEARING (Part No.545495AD)
from
$44.99
WHEEL BEARING
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)
from
$16.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27178)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
SKF – Wheel Bearing Circli (Part No.K8027242143SKF)
from
$5.61
Wheel Bearing Circli
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1991 BMW 318is Wheels and Tires Categories
1991 BMW 318is Wheels and Tires
You count on your 1991 BMW 318is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 19 Wheels and Tires ranging in price from $3.29 to $1,024.99, you’re sure to find everything you need for your 1991 BMW 318is.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 9 different brands like Dorman, Driveworks, and Moog. 1991 BMW 318is Wheels and Tires start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 7 extensive product reviews on 1991 BMW 318is Wheels and Tires.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1991 BMW 318is below to get started!
Top-Rated Wheels and Tires Brands For Your 1991 BMW 318is
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 BMW 318is running right for years to come. In our inventory you’ll find brands like Dorman, Driveworks, Moog, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware. All are waiting to get your 1991 BMW 318is back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(1)
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1991 BMW 318is, and some of our most reviewed parts include:
FAQs for 1991 BMW 318is Wheels and Tires
What are the most purchased Wheels and Tires for the 1991 BMW 318is?
Out of 19 Wheels and Tires for the 1991 BMW 318is, the most popular in our inventory are:
from
$3.99
This product is not rated
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each)
Wheel Bolts
