1990 Porsche 911 Drivetrains
More 1990 Porsche 911 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1990 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1990 Porsche 911 Drivetrains
Rein – CV Boot (Part No.BKB0069R)
from
$7.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Direct Fit for easy replacement.
- Resistant to heat, salt, road debris, oil and other contaminants.
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Rein – CV Joint Boot (Part No.K602063690RIN)
from
$7.43
The Rein CV Joint Boot is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Driveworks – Tapered Roller Bearing (Part No.S-HM-89449)
National – Bearings (Part No.HM89449)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Kaco – Input Shaft Seal (Part No.J1156324434KAC)
from
$14.82
Input Shaft Seal
Kaco – Manual Transmission Seal (Part No.J115039619KAC)
from
$22.22
Manual Transmission Seal
APA/URO Parts – Retaining Plate (Part No.K6082233973APA)
from
$8.26
Retaining Plate
Glyco – Intermediate Shaft Bearing, 2 Bearing Shell Set (Part No.A4270169473GLY)
from
$24.38
Intermediate Shaft Bearing, 2 Bearing Shell Set
GKN Drivetech – CV Joint Kit (Part No.K600022623LOB)
from
$134.98
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
GKN Drivetech – CV Joint Kit (Part No.K600024086LOB)
from
$182.75
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
GKN Drivetech – CV Joint (Part No.K610023263LOB)
from
$142.32
The SPIDAN and LOBRO joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
INA – Differential Bearing (Part No.J7060654749INA)
from
$41.43
Differential Bearing
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Original Equipment – Diff. Pinion Shaft L (Part No.J7023655780OEA)
from
$19.00
Diff. Pinion Shaft L
Original Equipment – CV Joint Bolt (Part No.K6050146529OEA)
from
$2.66
The Original Equipment CV Joint Bolt is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – CV Joint Bolt (Part No.K6050450704OEA)
from
$3.52
The Original Equipment CV Joint Bolt is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – CV Joint Bolt (Part No.K6050403597OEA)
from
$4.61
The Original Equipment CV Joint Bolt is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Febi – CV Joint Bolt (Part No.K6050439247FEB)
from
$2.06
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.32010-X)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1990 Porsche 911 Drivetrains Categories
1990 Porsche 911 Drivetrains
You count on your 1990 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 23 Drivetrains ranging in price from $2.66 to $182.75, you’re sure to find everything you need for your 1990 Porsche 911.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 11 different brands like Valvoline, National, and GKN Drivetech. 1990 Porsche 911 Drivetrains start as low as $2.66!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 910 extensive product reviews on 1990 Porsche 911 Drivetrains.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1990 Porsche 911 below to get started!
Top-Rated Drivetrains Brands For Your 1990 Porsche 911
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Porsche 911 running right for years to come. In our inventory you’ll find brands like Valvoline, National, GKN Drivetech, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1990 Porsche 911 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
