1990 Oldsmobile Silhouette Air Intakes
Find Your Specific 1990 Oldsmobile Silhouette Air Intakes
Below you will find various in-demand Oldsmobile Air Intakes, components and accessories for your 1990 Silhouette. Advance Auto Parts has popular Silhouette parts like Throttle Bodies & Carb Parts, Airboxes, Carburetor Kits and more. You’ll also find aftermarket and OEM Air Intakes for other Silhouette model years including
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1990 Oldsmobile Silhouette Air Intakes below and start saving instantly.
Popular 1990 Oldsmobile Silhouette Air Intakes Categories
Essential Air Intakes for 1990 Oldsmobile Silhouettes
Delphi – Throttle Position Sensor (Part No.SS10382)
from
$73.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
NTK – Throttle Position Sensor (Part No.TH0045)
from
$61.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Carquest Premium – Throttle Position Sensor (Part No.ECC1004)
from
$46.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Throttle Position Sensor (Part No.TH0033)
from
$65.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Delphi – Throttle Position Sensor (Part No.SS10425)
from
$51.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Multi-Use Connector (Part No.PTA1166)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Fuel Injector Seal Kit (Part No.AS005)
from
$4.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Upgrade your 1990 Oldsmobile Silhouette with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1990 Oldsmobile Silhouette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Air Intakes are key to keeping your Silhouette functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Air Intakes for the 1990 Oldsmobile Silhouette, designed to meet your needs without breaking the bank.
From
Throttle Bodies & Carb Part
replacements to
Airboxes
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1990 Oldsmobile Silhouette at great prices.
Our Air Intakes inventory for this model
ranges from just $1.99 to $138.99, with
an average price of $29.49.
Our 6 Air Intakes in stock come from 2 trusted brands, so you’re sure to find the right part for your 1990 Oldsmobile Silhouette without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1990 Oldsmobile Silhouette is always ready to roll. We’re committed to providing you with everything you need to keep your Silhouette in top shape, all in one place.
Start shopping confidently below for your 1990 Oldsmobile Silhouette!
Best-Selling Throttle Bodies & Carb Parts for 1990 Oldsmobile Silhouettes
Enhance the driving experience in your Oldsmobile with 2 quality Throttle Bodies & Carb Part components, starting at $20.99.
Carquest Premium – Multi-Use Connector (Part No.PTA1166)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Throttle Position Sensor (Part No.ECC1114)
from
$138.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Most Popular 1990 Oldsmobile Silhouette Airboxes
Customize your Oldsmobile with 3 Airboxes products
like Engine Air Duct Clips and
Engine Air Box Clips, all
priced under $4.99.
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Top Picks for 1990 Oldsmobile Silhouette Carburetor Kits
Upgrade Oldsmobile Silhouettes with top-quality Carburetor Kits parts, including 1 OEM and aftermarket selections for your 1990 model.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS005)
from
$4.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
FAQs for 1990 Oldsmobile Silhouette Air Intakes
Which Air Intakes are best-sellers for 1990 Oldsmobile Silhouettes?
Out of 6 Air Intakes that fit 1990 Oldsmobile Silhouettes, the following parts are the top sellers:
- GM Bumper Retainer (11910885) – $4.99
- Nylon Nut – 1/4 In. (No.14) (11911189) – $4.99
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
What’s the price range for 1990 Oldsmobile Silhouette Air Intakes?
Air Intake prices for the 1990 Oldsmobile Silhouette start at $1.99 and go up to $138.99 for the most premium parts.
What’s the average price of a Air Intake for a 1990 Oldsmobile Silhouette?
The average price for Air Intakes for the 1990 Oldsmobile Silhouette is $29.49. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Oldsmobile Silhouette model years?
What are the cheapest Air Intakes for my 1990 Oldsmobile Silhouette?
The cheapest 1990 Oldsmobile Silhouette Air Intakes we carry in stock are:
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
- GM Bumper Retainer (11910885) – $4.99
- Nylon Nut – 1/4 In. (No.14) (11911189) – $4.99
- Fuel Injector Seal Kit (11449789) – $4.99
- Multi-Use Connector (12447408) – $20.99
What types of Air Intakes do you sell for my 1990 Oldsmobile Silhouette?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 1990 Oldsmobile Silhouette:
Can I get help with 1990 Oldsmobile Silhouette Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Air Intakes and more.
What is your return policy for Oldsmobile Silhouette Air Intakes?
Advance Auto Parts keeps returns simple. For new Oldsmobile Silhouette Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
