1990 Mercedes-Benz 300TE Suspension Parts
More 1990 Mercedes-Benz 300TE Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1990 Mercedes-Benz 300TE, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1990 Mercedes-Benz 300TE Suspension Parts
Rare Parts – Strut Mount (Part No.RP17506)
from
$112.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
KYB – Jounce Bumper and Bellows (Part No.SB119)
from
$22.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
- Designed And Built Specifically For Mercedes Benz Cars
Monroe – OESpectrum Strut (Part No.71808)
from
$129.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Lemfoerder – OE Replacement Control Arm Strut (Part No.L201285193LEM)
from
$52.39
The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- OE Bushings and Ball Joints
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Monroe – Strut-Mate Strut Boot Kit (Part No.63640)
from
$28.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Rein – Control Arm Bushing (Part No.SCB0223P)
from
$23.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Lemfoerder – Control Arm Bushing (Part No.L203076811LEM)
from
$13.64
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Rein – Camber Strut (Part No.SCA0080P)
from
$47.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Rein – Control Arm (Part No.SCA0064P)
from
$29.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Lemfoerder – Control Arm Repair Kit (Part No.L204177069LEM)
from
$10.44
The Lemfoerder control arm repair kit is manufactured to exact OEM specifications providing original equipment quality, durability and performance. Should one component of the control arm be defect, Lemfoerder recommends that all components of this component group on the front or rear axle should be replaced. Furthermore, right and left sides should always be exchanged simultaneously. The risk of further complaints due to the failure other components is thus, as far as possible, ruled out. Selected materials and precise manufacturing of all individual parts ensure a long service life – even under the heaviest loads.
Product Features:
See More
Product Features:
- All components are perfectly matched.
- OE-Equivalent and Direct fit for easy Installation.
- Maximum safety and driving comfort.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
KYB – Bellows Bump Stop Kit (Part No.L3037242511KYB)
from
$31.02
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
Febi – Strut Bellows / Dust Boot (Part No.L303777070FEB)
from
$3.57
The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Manufactured with design and quality that matches or exceeds OE quality
- Resistant to oil and other contaminants
Lemfoerder – OE Replacement Control Arm (Part No.L200030918LEM)
from
$247.43
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Lemfoerder – OE Replacement Control Arm (Part No.L200026556LEM)
from
$248.54
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Lemfoerder – Control Arm Bushing (Part No.L2030383742LEM)
from
$34.53
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Lesjofors – Lesjofors Coil Spring (Part No.L500073699LES)
from
$128.08
Lesjofors produce the world’s largest range of automotive Coil springs, covering more than 10,000 standard and heavy duty applications. Manufactured in Sweden using modern, state of the art production methods, Lesjofors maintain 100% quality control over every spring in the range.
Product Features:
See More
Product Features:
- Superior grade spring steel
- State of the art computer controlled machines
- Advanced Zinc Phosphate and Epoxy Powder Paint surface treatment
- Supplier of matching quality parts according to BER1400/2002
Lesjofors – Lesjofors Coil Spring (Part No.L500073700LES)
from
$147.97
Lesjofors produce the world’s largest range of automotive Coil springs, covering more than 10,000 standard and heavy duty applications. Manufactured in Sweden using modern, state of the art production methods, Lesjofors maintain 100% quality control over every spring in the range.
Product Features:
See More
Product Features:
- Superior grade spring steel
- State of the art computer controlled machines
- Advanced Zinc Phosphate and Epoxy Powder Paint surface treatment
- Supplier of matching quality parts according to BER1400/2002
Febi – Hydraulic Fluid ZH-M (yellow) – 1 Liter (Part No.L707097881FEB)
from
$17.87
Type: 02615 Applications: For load leveling suspension, hydropneumatic suspension, hydraulic soft top, 4 Matic and ASD (Adaptive Damping System) Specifications: Meets ZHM Fluid Specifications OEM Approvals: MB 343.0 Volume: 1 Liter Febi 02615 mineral-based hydraulic fluid was developed for use in level control systems and central hydraulic systems of vehicles.
Product Features:
See More
Product Features:
- Ensures excellent protection against oxidation and ageing due to a selected combination of additives.
- Is used when mineral oil based hydraulic media are recommended because of the operating conditions.
Meyle – Coil Spring Shim (Part No.L500776545MEY)
from
$6.43
Coil Spring Shim
Meyle – Coil Spring Shim (Part No.L500776546MEY)
from
$7.33
Coil Spring Shim
APA/URO Parts – Strut Bump Stop (Part No.L3036100977APA)
from
$11.03
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
Popular 1990 Mercedes-Benz 300TE Suspension Parts Categories
1990 Mercedes-Benz 300TE Suspension Parts
You count on your 1990 Mercedes-Benz 300TE to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 47 Suspension Parts ranging in price from $3.57 to $251.99, you’re sure to find everything you need for your 1990 Mercedes-Benz 300TE.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 16 different brands like Monroe, Moog, and Rein. 1990 Mercedes-Benz 300TE Suspension Parts start as low as $3.57!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2 extensive product reviews on 1990 Mercedes-Benz 300TE Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1990 Mercedes-Benz 300TE below to get started!
Top-Rated Suspension Parts Brands For Your 1990 Mercedes-Benz 300TE
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Mercedes-Benz 300TE running right for years to come. In our inventory you’ll find brands like Monroe, Moog, Rein, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Air Suspension and Kits. All are waiting to get your 1990 Mercedes-Benz 300TE back on the road. Some of the top-rated Monroe products in these categories are:
FAQs for 1990 Mercedes-Benz 300TE Suspension Parts
What are the most purchased Suspension Parts for the 1990 Mercedes-Benz 300TE?
Out of 47 Suspension Parts for the 1990 Mercedes-Benz 300TE, the most popular in our inventory are:
