1990 Honda Civic Towing Products

Essential 1990 Honda Civic Towing Products

Hopkins – 46255, Power Taillight Converter (Part No.46255)

46255, Power Taillight Converter

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$38.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.56011)

Custom Wiring Harness (4-Way Flat Output)

from

$40.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Honda Civic sedan (except hybrid), Honda Fit 5door sport, Honda Accord without LED taillights, Mazda 3, Mazda CX5 and Mitsubishi Galant sedan, 2.4L, single exhaust (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Hopkins – Vehicle Wiring Kit (Part No.43105)

Vehicle Wiring Kit

from

$40.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicles independent lights to the trailers common lights. Required accessories are included to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.56396)

Custom Wiring Harness (4-Way Flat Output)

from

$109.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Honda Civic (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

Hopkins – Connector (Part No.46365)

Connector

from

$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery

Product Features:
  • For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
  • Protects Tow Vehicle Electronics And Itself From Wiring Shorts
  • Self-Resetting
  • Includes 12 Ga. Power Lead Wire
  • Includes Fuse/Fuse Assembly/Splices/Cable Ties
  • Powers Up To 8.0 Amps Per Output
  • Receives Power Directly From The Battery
  • Includes Vehicle Side 4 Flat
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins (Part No.11604)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins

from

$251.99
However you define adventure — whether it’s climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere — CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Civic (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4″ receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity (Part No.11587)

Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity

from

$220.99
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Honda Civic sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays.

Product Features:
  • Rated to 1,000 lbs. gross trailer weight and 100 lbs. tongue weight
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins (Part No.116043)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins

from

$309.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Honda Civic (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity (Part No.11586)

Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity

from

$235.99
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Honda Civic sedan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays.

Product Features:
  • Rated to 1,000 lbs. gross trailer weight and 100 lbs. tongue weight
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Made in USA (may include imported hardware)
See More

CURT – Class 1 Fixed-Tongue Trailer Hitch with 3/4in. Trailer Ball Hole (Part No.11592)

Class 1 Fixed-Tongue Trailer Hitch with 3/4in. Trailer Ball Hole

from

$175.99
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,000 lbs. of gross trailer weight and 100 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Honda Civic wagon or van, 2WD or 4WD (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays.

Product Features:
  • Rated to 1,000 lbs. gross trailer weight and 100 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Fixed drawbar readily accepts a 3/4″ trailer ball shank
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Made in USA (may include imported hardware)
See More

1990 Honda Civic Towing Products

You count on your 1990 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 5 Towing Products ranging in price from $70.99 to $220.99, you’re sure to find everything you need for your 1990 Honda Civic.

Brands matter. If you want to shop a specific Towing Products brand, we stock 3 different brands like Hopkins, Carquest Premium, and CURT. 1990 Honda Civic Towing Products start as low as $70.99!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 18 extensive product reviews on 1990 Honda Civic Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 1990 Honda Civic below to get started!

Top-Rated Towing Products Brands For Your 1990 Honda Civic

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Honda Civic running right for years to come. In our inventory you’ll find brands like Hopkins, Carquest Premium, CURT, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Hitches and Trailer Wiring. All are waiting to get your 1990 Honda Civic back on the road. Some of the top-rated Hopkins products in these categories are:
Connector
from $99.99
(1)
Connector
Trailer Wire Converters
46255, Power Taillight Converter
from $70.99
(2)
46255, Power Taillight Converter
Trailer Wiring Harness

FAQs for 1990 Honda Civic Towing Products

What are the most purchased Towing Products for the 1990 Honda Civic?

Out of 5 Towing Products for the 1990 Honda Civic, the most popular in our inventory are:
Trailer Connector Kit
from $78.99
This product is not rated
Trailer Connector Kit
Trailer Wiring Kits
Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity
from $220.99
This product is not rated
Fixed-Tongue Trailer Hitch: 3/4" Trailer Ball Hole, 1,000 LB Capacity
Trailer Hitch – Class I
Class 1 Fixed-Tongue Trailer Hitch with 3/4in. Trailer Ball Hole
from $175.99
This product is not rated
Class 1 Fixed-Tongue Trailer Hitch with 3/4in. Trailer Ball Hole
Trailer Hitch – Class V