1990 GMC S15 Jimmy Drivetrains

Below you will find various in-demand GMC Drivetrains, components and accessories for your 1990 S15 Jimmy. Advance Auto Parts has popular S15 Jimmy parts like 4WD Components, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other S15 Jimmy model years including 1985, 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994 and more. Select a category of 1990 GMC S15 Jimmy Drivetrains below and start saving instantly.

Popular 1990 GMC S15 Jimmy Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

4WD Actuator Switches

U-Joints

Drive Shaft and Axles

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Rear Differential Cover Gaskets

Drive Shaft Center Supports

Differential Covers

4WD Actuator Cables

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Axle Shaft Seals

OE CV Boot Kits

Differential Pinion Pilot Bearings

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Carrier Shim Kits

Differential Pinion Seals

Rear Axle Shaft Bearings

4WD Actuator Valves

Differential Ring and Pinions

Spindle Lock Nuts

Drive Shaft Repair Kits

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bushings

Axle Nuts

Drive Shaft Seals

Differential Seals

Axle Shaft Lock C-Clips

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Differential Pinion Shafts

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

4WD Indicator Lamp Switch Connector

Mounting Adapter Seals

Transfer Case Oil Drain Plugs

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

4WD Indicator Lamp Switches

Output Shaft Pilot Bearings

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Power Take Off (PTO) Input Shaft Pilot Bearing

Mounting Adapter Bearing

Essential Drivetrains for 1990 GMC S15 Jimmies

from

$11.99

7.5 GM cover gasket.

Product Features:

Cover gasket
Fits GM 7.5″ and 7.625″

from

$4.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$14.29

Product Features:

Brand may vary by location

from

$3.29

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.49

SHAFT SEAL

from

$277.99

Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 7.5″ with 26 spline axles
Provides 100% traction to both wheels at all times
Installs into standard open carrier case

from

$43.99

RngPnnInstlKt

from

$5.19

SHAFT SEAL

from

$29.99

This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications.
Effective fix – restores proper 4WD operation after original switch degrades and fails
Durable construction – built for reliable longevity, free of defects in materials and craftmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$10.99

SHAFT SEAL

from

$233.99

Product Features:

GM 10BL 8.5 R/P 3.90 MG FRT/REAR

from

$5.99

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$551.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$15.29

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel
High level bonding adhesive is used for durability
Elastomer compounds do not utilize any reground rubber fillers

from

$3.79

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$36.49

AXLE BEARING

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$39.49

This 4WD actuator cable directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD actuator cable matches the fit and function of the original cable on certain vehicle years, makes and models.
Effective fix – installation restores four-wheel drive function interrupted by a failed original cable.
Related repair – recommended for replacement when installing a new axle actuator
Trustworthy quality – backed by team of designers and engineers in the United States

from

$6.49

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.79

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$195.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$156.99

Product Features:

SUPERKIT – GM*7.5*1982-98*TIMKIN* EXCEPT 1990-2002 ASTRO/SAFARI

from

$64.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

Upgrade your 1990 GMC S15 Jimmy with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1990 GMC S15 Jimmy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your S15 Jimmy functioning at its best. At Advance Auto Parts, we offer a wide selection of 203 Drivetrains for the 1990 GMC S15 Jimmy, designed to meet your needs without breaking the bank. From 4WD Component replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1990 GMC S15 Jimmy at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $1,839.99, with an average price of $197.47. Our 203 Drivetrains in stock come from 21 trusted brands, so you’re sure to find the right part for your 1990 GMC S15 Jimmy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 GMC S15 Jimmy, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, Driveworks, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $5.49, and at an average 4 stars rating. With 850 customer reviews and counting, our 1990 GMC S15 Jimmy Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 GMC S15 Jimmy is always ready to roll. We’re committed to providing you with everything you need to keep your S15 Jimmy in top shape, all in one place. Start shopping confidently below for your 1990 GMC S15 Jimmy!

Best-Selling 4WD Components for 1990 GMC S15 Jimmies

Enhance the driving experience in your GMC with 7 quality 4WD Component components, starting at $18.79.

show more show less

from

$39.49

This 4WD actuator cable directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD actuator cable matches the fit and function of the original cable on certain vehicle years, makes and models.
Effective fix – installation restores four-wheel drive function interrupted by a failed original cable.
Related repair – recommended for replacement when installing a new axle actuator
Trustworthy quality – backed by team of designers and engineers in the United States

from

$35.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$131.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Improved design – this 4WD actuator has been redesigned to eliminate common failures in the original part caused by exposure to ozone.
Upgraded materials – the rubber diaphragm in this 4WD actuator is reinforced with a mesh layer to provide 3X greater durability than the original material.
Seamless repair – this upgraded 4WD actuator matches the fit and function of the original part for a trouble-free installation
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$201.99

ACDelco Professional 4WD Actuator is a high quality aftermarket replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This premium aftermarket actuator is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$80.99

from

$32.99

from

$18.79

Most Popular 1990 GMC S15 Jimmy Drive Shafts and Axles

Customize your GMC with 29 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Universal Joints, all priced under $675.99.

show more show less

from

$5.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$35.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$6.49

An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$139.99

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$22.79

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$19.99

Value-priced bearing meets all cataloged application requirements.

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$10.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$51.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.99

Product Features:

Brand may vary by location

from

$32.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.49

Product Features:

Brand may vary by location

from

$675.99

Driveshaft – Front

from

$563.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$532.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$366.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation.
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance.
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$66.99

Center Support Bearing

from

$64.99

AXLE SHAFT REPAIR BE

from

$44.99

SPICER U-JOINT

from

$36.49

AXLE BEARING

from

$18.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$11.99

BEARING

from

$6.19

Spindle Nut

from

$5.19

SHAFT SEAL

from

$1.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

Top Picks for 1990 GMC S15 Jimmy Universal Joints

Upgrade GMC S15 Jimmies with top-quality Universal Joints parts, including 24 OEM and aftermarket selections for your 1990 model.

show more show less

from

$28.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$2.59

Universal Joint Strap Kit

from

$26.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$19.99

Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$11.99

For U-Joints 355, 372 & 534G
Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$32.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$32.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$32.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$50.99

from

$8.99

Universal Joint

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$34.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$32.49

from

$6.49

Universal Joint

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$24.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$4.59

Universal Joint

from

$4.49

Universal Joint

from

$11.49

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

For U-Joints 354, 368, 369, 445 & 455
Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$6.99

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

In-Demand Transfer Cases for 1990 GMC S15 Jimmies

Select from 18 premium Transfer Cases parts for your 1990 GMC S15 Jimmy, with prices ranging from $5.19 to $132.99.

show more show less

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$17.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$29.99

This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications.
Effective fix – restores proper 4WD operation after original switch degrades and fails
Durable construction – built for reliable longevity, free of defects in materials and craftmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$14.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$6.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$13.29

This transfer case oil drain plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this transfer case oil drain plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$24.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$25.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$8.99

ManTransExtHouseBush

from

$53.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$26.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$132.99

TCaseBrg-SealKit

from

$18.99

CONE

from

$5.19

SHAFT SEAL

Most Sold 1990 GMC S15 Jimmy Differentials

Explore our best-selling GMC parts for the 1990 S15 Jimmy among 117 OEM and aftermarket options starting from $1.99.

show more show less

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$159.99

Product Features:

INTERNAL KIT-GM 7.6″ W/28 SPLINE

from

$151.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Spindle bearing and seal kit
Includes all components required to complete the repair
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$43.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$124.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

GM 7.5 MASTER KIT BRG & SEAL ’82-98

from

$10.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$195.99

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$99.99

KIT BRG & SEAL GM 7.5″,’82-98

from

$8.49

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$6.49

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
Required replacement – when servicing the differential
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

from

$15.29

Manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel
High level bonding adhesive is used for durability
Elastomer compounds do not utilize any reground rubber fillers

from

$29.99

DIFF COVER KIT

from

$7.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$28.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$12.99

Product Features:

KIT SHIM

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$38.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$28.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.49

Product Features:

Brand may vary by location

from

$138.99

from

$129.99

GM 7.5 TIMKEN MASTER KIT ’82-98

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$232.99

Product Features:

GM 10BL 8.5 R/P 4.88 FRT/REAR MGP

from

$224.99

Product Features:

GM 10BL 7.5&7.625 R/P 3.73 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$14.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$12.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$245.99

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$224.99

Product Features:

GM 10BL 7.5&7.625 R/P 3.42 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438

from

$222.99

Product Features:

GM 10BL 7.5 &7.625 R/P 4.10 MGP 10 3/8 X 18 LH THRED BLTS, PD=1.438

from

$206.99

Product Features:

GM 10BL 7.2 R/P 4.56 IFS MG

from

$179.99

Product Features:

GM10 BL 7.5″ 3.73

from

$71.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$64.99

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$49.99

Product Features:

MINI INSTALL KIT GM 7.5

from

$38.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$2.69

from

$216.99

Product Features:

GM 10BL 7.5&7.625 R/P 4.56 MG

from

$216.99

Product Features:

GM 10BL 7.5&7.625 R/P 4.10 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438

from

$1839.99

GEAR & INSTALL PKG

Top-Rated Drivetrains Brands For Your 1990 GMC S15 Jimmy

Shop for the best-rated brands offering Drivetrains and other products for your 1990 GMC S15 Jimmies. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1990 S15 Jimmy start at just $5.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1990 GMC S15 Jimmy Drivetrains

When it comes to maintaining or upgrading your 1990 GMC S15 Jimmy, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1990 GMC S15 Jimmy. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Moog 1990 GMC S15 Jimmy Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1990 GMC S15 Jimmy owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1990 S15 Jimmy, Advance Auto Parts carries a full inventory of 11 Moog Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Moog Drivetrains range from $11.99 to $34.99, plus, with more than 343 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$11.99

This product is not rated

Universal Joint Strap Kit

“”

from
$15.29

This product is not rated

Differential Carrier Bushing

“”

from
$32.99

This product is not rated

Greaseable Super Strength Universal Joint

“”

FAQs for 1990 GMC S15 Jimmy Drivetrains

Which Drivetrains are best-sellers for 1990 GMC S15 Jimmies?

Out of 203 Drivetrains that fit 1990 GMC S15 Jimmies, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
Universal Joint (10265505) – $15.99

What’s the price range for 1990 GMC S15 Jimmy Drivetrains?

Drivetrain prices for the 1990 GMC S15 Jimmy start at $1.99 and go up to $1,839.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1990 GMC S15 Jimmy?

The average price for Drivetrains for the 1990 GMC S15 Jimmy is $197.47. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other GMC S15 Jimmy model years?

Yes, we currently carry Drivetrains for 11 model years of GMC S15 Jimmies between 1983 and 1994. Drivetrains are bought most frequently for the following model years: 1994, 1993, 1992, 1991, 1989, 1988, 1987, 1986, and 1985.

What are the cheapest Drivetrains for my 1990 GMC S15 Jimmy?

The cheapest 1990 GMC S15 Jimmy Drivetrains we carry in stock are:

Axle Seal (10593098) – $1.99
Differential Ring Gear Bolt (10282159) – $1.99
Spindle Washer – I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (sold by each) (22148783) – $2.29
Ring Gear Bolt (20520168) – $2.49
Differential Ring Gear Bolt (10282141) – $2.49

What are the top-rated Drivetrains that fit the 1990 GMC S15 Jimmy?

Out of 850 reviews by customers, our 1990 GMC S15 Jimmy Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1990 GMC S15 Jimmy and their top-rated products:

4WD Components
- 4WD Actuator Control Cable (10040036) – $39.49
Universal Joints
- 4WD Actuator Control Cable (10040036) – $39.49

What types of Drivetrains do you sell for my 1990 GMC S15 Jimmy?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1990 GMC S15 Jimmy:

Can I get help with 1990 GMC S15 Jimmy Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.

What is your return policy for GMC S15 Jimmy Drivetrains?

Advance Auto Parts keeps returns simple. For new GMC S15 Jimmy Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 GMC S15 Jimmy Drivetrains

Yukon Gear – 7.5 GM Cover Gasket (Part No.23018)

Motive Gear – Crush Sleeve (Part No.1234726)

Driveworks – Tapered Roller Bearing (Part No.S-HM-88648)

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)

FAG US – SHAFT SEAL (Part No.SS2588)

Yukon Gear – Mini Spool For GM 7.5" With 26 Spline Axles (Part No.32228)

Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

FAG US – SHAFT SEAL (Part No.SS2569)

Dorman – Help – Transfer Case Switch (Part No.49315)

FAG US – SHAFT SEAL (Part No.SS2303)

Motive Gear – Differential Ring and Pinion (Part No.GM10-390)

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

National – Bearings (Part No.J-2416)

Felpro – TRANSFER CASE GASKET SET (Part No.72769)

Dorman – Rear Drive Shaft: Greaseable (Part No.976-807)

National – Multi Purpose Seal (Part No.5200)

MOOG – Differential Carrier Bushing (Part No.K6572)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

National – Multi Purpose Seal (Part No.4529N)

FAG US – AXLE BEARING (Part No.FC67147)

Motive Gear – Ring Gear Bolt (Part No.14066913)

Dorman – 4WD Actuator Control Cable (Part No.600-601)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Dorman – Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (Sold by each) (Part No.615-065)

Dorman – Rear Axle Shaft, Left or Right (Part No.630-103)

Motive Gear – Differential Super Bearing Kit – Timken (Part No.R7.5GRSKT)

Richmond Gear – Differential Cross Shaft (Part No.80-0270-1)

Dorman – 4WD Actuator Control Cable (Part No.600-601)

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)

Dorman – 4WD Front Differential Actuator (Part No.600-102XD)

ACDelco – Four Wheel Drive Actuator (Part No.D3984A)

Carquest Premium – 4WD Actuator (Part No.FWC1091)

Carquest Premium – 4WD Indicator Light Switch (Part No.FWA1001)

Carquest Premium – 4WD Indicator Light Switch (Part No.FWA1023)

Driveworks – Oil Seal (Part No.S-8660S)

Spicer – Universal Joint (Part No.5-1310X)

Dorman – Help – Axle Shaft Retainer (Part No.05311)

National – Shaft Repair Sleeve (Part No.99174)

National – Bearings (Part No.A-5)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10035)

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

National – Multi Purpose Bearing (Part No.HB-88107-A)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

National – Bearings (Part No.B-2010)

National – Multi Purpose Seal (Part No.4529N)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

National – Bearings (Part No.88107-BVV)

Driveworks – Clutch Release Bearing (Part No.S-B-2010)

USA Standard Gear – Driveshaft – Front (Part No.44326)

Dorman – Rear Drive Shaft: Greaseable (Part No.976-806)

Dorman – Rear Drive Shaft: Greaseable (Part No.976-808)

Dorman – Front Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.938-219)

Spicer – Center Support Bearing (Part No.210370-1X)

FAG US – AXLE SHAFT REPAIR BE (Part No.DR0148K)

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

FAG US – AXLE BEARING (Part No.FC67147)

National – Bearings (Part No.SCH-1810)

FAG US – BEARING (Part No.B2010)

Dorman – Spindle Nut (Part No.K1002831647DOR)

FAG US – SHAFT SEAL (Part No.SS2468)

Pro-King – Axle Seal (Part No.721A074)

Spicer – Universal Joint (Part No.5-153X)

Driveworks – Universal Joint (Part No.DW-445)

Neapco – Universal Joint (Part No.1-0025)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

Driveworks – Universal Joint (Part No.DW-534G)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

Spicer – Universal Joint (Part No.5-795X)

Neapco – Universal Joint (Part No.2-3010)

Driveworks – Universal Joint (Part No.DW-369)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Spicer – Universal Joint (Part No.5-3147X)

Neapco – Universal Joint (Part No.1-0154)