1990 GMC K3500 Differentials

Name: Differential Master Bearing Kit - Koyo
Brand: Motive Gear
SKU: R70HRMK
Price: 184.99 USD

Find your specific 1990 GMC K3500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1990 GMC K3500 Differentials

from

$184.99

Product Features:

D70 HD BEARING SEAL & GASKET M/K

from

$1119.99

Differential

from

$93.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

CARRIER BEARING KIT FRD 10.5″ W/TIM

from

$11.99

10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:

Ring gear bolt for GM 10.5″ 14 bolt truck
4.56 and up ratio
1/2″ x 18 thread
2.522″ overall length

from

$1049.99

Yukon Trac Lok positraction internals for Dana 80 and with 35 spline axles. Uses round design cross pin. (Not for Dana 60 or 70). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. Dana 80 Trac Lok spider gears, 35spline (” round” design cross pin, NOT Dana 60 or NOT Dana 70 ).

Product Features:

Spider gear kit
Fit Dana Spicer 80 Powr Lok positraction with 35 spline axles
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$422.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$211.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$15.99

O-ring for left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:

Axle o-ring
Fits Chrysler 9.25″ IFS

from

$427.99

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$287.99

Yukon round replacement yoke companion flange for Dana 60 and 70. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
5.00″ O.D.
8 x 4.25″ bolt pattern
Round companion flange

from

$129.99

Product Features:

Fits Dana Spicer 70
Steel

from

$21.99

Left hand adjuster lock nut for 9.25″ GM.

Product Features:

Side adjuster lock nut
Fits GM 9.25″

from

$20.99

Product Features:

Brand may vary by location

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits 382A race
All steel construction

from

$7.99

Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:

Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8″ x 14 thread
1 5/16″ socket

from

$1747.99

Product Features:

35 spline inner and 30 spline outer
Fits Dana Spicer 60 in 1977-1991 GM
Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$13.99

Product Features:

PINION SHIM – DANA 70 ALL

from

$8.99

14T pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits GM 10.5″ 14 bolt truck

from

$19.99

Product Features:

Oil baffle
Fits Dana Spicer 80

from

$7.99

Differential Cover B

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$44.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

Popular 1990 GMC K3500 Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Differential Gear Sets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Limited Slip Differential Assemblies

Differential Bearing Adjuster Nut Lock Bolts

Maybe you’re in the middle of a full rebuild of that 1990 GMC K3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 309 different Differentials in our inventory ranging from $1.89 to $2,969.99. That means you can find the exact parts or products you need to keep that 1990 GMC K3500 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1990 GMC K3500. National, Idemitsu, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1990 GMC K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 354 reviews in this category, some of the top rated parts include Taper Bearing Set with 2.5 stars and Tapered Cone Wheel Bearing Assembly with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1990 GMC K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1990 GMC K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 GMC K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Idemitsu Differentials

We carry Idemitsu parts in our stock across Differential Oil categories, plus more. For a 1990 GMC K3500, our most popular Idemitsu Differentials include:

from $13.79

(3)

Type HP Automatic Transmission Fluid – 1 qt

Differential Oil

Top 1990 GMC K3500 Differentials from National

National products are another trusted brand when it comes to Differentials for your 1990 GMC K3500. Popular National parts include:

from $22.99

(12)

Bearings

Differential Bearings

from $16.99

(6)

Bearings

Differential Bearings

from $19.79

(2)

Multi Purpose Seal

Differential Pinion Seals

FAQs for 1990 GMC K3500 Differentials

What are the most purchased Differentials for the 1990 GMC K3500?

Out of 309 Differentials for the 1990 GMC K3500, the most popular in our inventory are:

from $6.79

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $38.49

(15)

Rear Differential Cover

Differential Covers

What are the top-rated 1990 GMC K3500 Differentials?

Top-rated Differentials for your 1990 GMC K3500 based on customer reviews/ratings are:

from $13.79

(4)

Taper Bearing Set

“Worked great on my 1981 Chevy C20”

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

“Worked sell”

from $27.49

(1)

Shaft Repair Sleeve

“Perfect Fit. Product was exactly as described”

1990 GMC K3500 Differentials

More 1990 GMC K3500 Differentials

Essential 1990 GMC K3500 Differentials

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R70HRMK)

Yukon Gear – Differential (Part No.26044)

Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

Yukon Gear – Trac Lok Positraction Internals For Dana 80 And With 35 Spline Axles (Part No.16094)

Pro-King – Differential Internal Nest Kit (Part No.718C717B)

Pro-King – Clutch Pack (Part No.717A119)

Yukon Gear – O-Ring For Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33133)

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.59016)

Yukon Gear – Round Replacement Yoke Companion Flange For Dana 60 And 70 (Part No.41033)

Yukon Gear – Steel Cover For Dana 70 (Part No.32322)

Yukon Gear – Left Hand Adjuster Lock Nut For 9.25" GM (Part No.33354)

Driveworks – Differential Pinion Seal (Part No.S-710536)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Yukon Gear – Bearing Race Driver (Part No.56009)

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

USA Standard Gear – 4340 Chrome-Moly Axle Kit For ’77-’91 GM Dana 60 Front, 30 Spline With Super Joints (Part No.35151)

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Yukon Gear – Differential Cover B (Part No.33572)

Felpro – Differential Cover Gasket (Part No.RDS 55063)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Motive Gear – Differential Gear Install Kit (Part No.GM10.5IKL-2)

National – Bearings (Part No.382A)

National – Bearings (Part No.LM102910)

Popular 1990 GMC K3500 Differentials Categories