1990 GMC K1500 Differentials

Essential 1990 GMC K1500 Differentials

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Zip Locker Bulkhead Fitting Kit

from

$36.99
Product Features:
  • Bulkhead fitting kit
  • Includes bulkhead fitting, outer fitting and o-ring
See More

Pro-King – Differential Cover Gasket (Part No.742G303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Nut (Part No.33150)

Pinion Nut

from

$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

Product Features:
  • Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 7/8″ x 16 thread
  • 1 1/8″ socket
See More

Yukon Gear – Set Up Bearing (Part No.56037)

Set Up Bearing

from

$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 44
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

USA Standard Gear – Master Overhaul Kit for the GM 12T Differential (Part No.37043)

Master Overhaul Kit for the GM 12T Differential

from

$194.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 12 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Aluminum Girdle Cover For 8.2" And 8.5" GM Ta HD (Part No.32121)

Aluminum Girdle Cover For 8.2" And 8.5" GM Ta HD

from

$396.99
Aluminum Girdle cover for 8.2″ and 8.5″ GM TA HD.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • Aluminum girdle cover
See More

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Differential Ring Gear Bolt

from

$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Side Bearing Adjuster Lock For 8.25" GM IFS (Part No.33355)

Side Bearing Adjuster Lock For 8.25" GM IFS

from

$11.99
Side bearing adjuster lock for 8.25″ GM IFS.

Product Features:
  • Side adjuster lock for GM 8.25″ IFS
See More

FAG US – SHAFT SEAL (Part No.SS2685)

SHAFT SEAL

from

$11.29
SHAFT SEAL

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

Differential Pinion Yoke Assembly

from

$221.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Dana 44 Complete Shim Kit Replacement (Part No.55021)

Dana 44 Complete Shim Kit Replacement

from

$51.99
Product Features:
  • Complete shim kit for Dana Spicer 44
See More

Pro-King – Differential Internal Nest Kit (Part No.742D717)

Differential Internal Nest Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-121)

Rear Axle Shaft, Left or Right

from

$161.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" With 28 Spline Axles (Part No.26015)

Dura Grip Positraction For GM 8.5" With 28 Spline Axles

from

$859.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Pro-King – Differential Cross Shaft (Part No.742J673)

Differential Cross Shaft

from

$21.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Grizzly Locker, Fits Dana 44, 30 Spline, 3.73 & Down (Part No.28021)

Grizzly Locker, Fits Dana 44, 30 Spline, 3.73 & Down

from

$998.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.73 and down ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

National – Bearings (Part No.31520)

Bearings

from

$10.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1990 GMC K1500 Differentials

Maybe you’re in the middle of a full rebuild of that 1990 GMC K1500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 306 different Differentials in our inventory ranging from $1.99 to $1,638.99. That means you can find the exact parts or products you need to keep that 1990 GMC K1500 running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 1990 GMC K1500. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1990 GMC K1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,476 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Differential Yoke including Seal and Pinion Nut with 3.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1990 GMC K1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1990 GMC K1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 GMC K1500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K1500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 1990 GMC K1500 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1990 GMC K1500. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1990 GMC K1500 Differentials

What are the most purchased Differentials for the 1990 GMC K1500?

Out of 306 Differentials for the 1990 GMC K1500, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts

What are the top-rated 1990 GMC K1500 Differentials?

Top-rated Differentials for your 1990 GMC K1500 based on customer reviews/ratings are:
Rear Differential Cover
from $32.99
(14)
Rear Differential Cover
“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
Differential Yoke including Seal and Pinion Nut
from $139.99
(10)
Differential Yoke including Seal and Pinion Nut
“Will this fot 2001 jeep grand cherokee 4.0 limited with dana 35 read end”
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”