from

$38.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$0.65

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$48.99

ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine control module (ECM) to adjust timing
Helps prevent damage to the engine caused by pre-ignition
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$59.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$152.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$62.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$30.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$3.49

This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine rocker arm nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$376.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$111.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$99.99

Product Features:

Use W/ Valve Springs Part #5703, 5794
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$4.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$6.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$8.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$24.79

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$11.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Retainer
Utilizes ISO & QS certified manufacturing
Meets or exceeds OEM specifications

from

$4.29

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$316.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$189.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

from

$2.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$0.30

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$16.99

These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly. 2 per set.

Product Features:

Precision machined
Case hardened
Give accurate alignment
2 per set

from

$16.99

These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly. 2 per set.

Product Features:

Precision machined
Case hardened
Give accurate alignment
2 per set

from

$11.49

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for a universal fit, this product’s T-bar heads allow for easy tightening without tools. Sold 4 per package, these studs are intended to fit standard height Chevy Center bolt valve covers.

Product Features:

4 bolts included in each package
T-bar head design
Triple chrome-plated finish
Fits standard height Chevy Center bolt valve covers

from

$15.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast and easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket’s re-usable valve cover gasket and custom valve covers.

Product Features: