1990 GMC C3500 Differentials

Name: GM 10.5' 14 Bolt Truck Cover Gasket
Brand: Yukon Gear
SKU: 23016
Price: 13.99 USD

Find your specific 1990 GMC C3500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1990 GMC C3500 Differentials

from

$13.99

14T cover gasket.

Product Features:

Cover gasket
Fits GM 10.5″ 14 bolt truck

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$138.99

Product Features:

KIT – INT. DANA 70 OPEN 35 SPL.

from

$17.29

Product Features:

Brand may vary by location

from

$339.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits GM 10.5″ GM 14 bolt truck
10.50″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.56 ratio

from

$339.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$16.99

Product Features:

Pinion depth shims for Dana Spicer 70 and 70HD, Ford 10.25″ and 10.5″

from

$539.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Dana Spicer 70HD
Fits Dana Spicer Super 70
Included are carrier bearings and races, pinion bearings and races, pinion seal, marking compound and brush.

from

$211.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$62.99

Spectre’s Chrome GM Differential Covers feature a 14 bolt design and include the chrome bolts and gasket needed for an easy install. Made to OEM specifications these differential covers are triple chrome plated ensuring they perform as well as they look. This product fits the following vehicles with a 10.5 inch ring gear: 73-’87 Chevy/GMC 3/4 & 1 Ton 2/4WD (rear), ’75-’00 Chevy/GMC Dually 2/4WD (rear), ’88-’99 Suburban 3/4 Ton 2/4WD (rear). Includes 14 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:

Fits the following vehicles with a 10.5 inch ring gear: 73-’87 Chevy/GMC 3/4 & 1 Ton 2/4WD (rear), ’75-’00 Chevy/GMC Dually 2/4WD (rear), ’88-’99 Suburban 3/4 Ton 2/4WD (rear).
Triple chrome plated steel construction
14 bolt design
14 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included

from

$221.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$404.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 1989-1997 GM 10.5″ 14 bolt truck
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD

from

$112.99

Product Features:

CARRIER BEARING KIT FORD 10.5″

from

$45.49

SHAFT SEAL

from

$89.99

Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:

Cross pin shaft
Fits GM 10.5″ 14 bolt truck

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$349.99

Yukon replacement yoke for Dana 80 with a 1550 U/joint size. 4.964″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

from

$7.99

14T side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 10.5″ 14 bolt truck

from

$9.49

Product Features:

Brand may vary by location

from

$19.99

Product Features:

Oil baffle
Fits Dana Spicer 80

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM903210 race
All steel construction

from

$11.99

Product Features:

CRUSH SLEEVE 14 BOLT 10.5 3116

from

$10.99

14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

Product Features:

Ring gear bolt for GM 10.5″ 14 bolt truck
4.11 and down ratio
1/2″ x 18 thread
2.085″ overall length

from

$1049.99

Yukon Trac Lok positraction internals for Dana 80 and with 35 spline axles. Uses round design cross pin. (Not for Dana 60 or 70). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. Dana 80 Trac Lok spider gears, 35spline (” round” design cross pin, NOT Dana 60 or NOT Dana 70 ).

Product Features:

Spider gear kit
Fit Dana Spicer 80 Powr Lok positraction with 35 spline axles
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$5.99

DiffrlPinSupportBolt

Popular 1990 GMC C3500 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Maybe you’re in the middle of a full rebuild of that 1990 GMC C3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 218 different Differentials in our inventory ranging from $1.89 to $2,324.99. That means you can find the exact parts or products you need to keep that 1990 GMC C3500 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1990 GMC C3500. Valvoline, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1990 GMC C3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 380 reviews in this category, some of the top rated parts include Bearings with 4.3 stars and Type TLS Automatic Transmission Fluid – 1 qt with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 1990 GMC C3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1990 GMC C3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 GMC C3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 1990 GMC C3500, our most popular Valvoline Differentials include: