1990 GMC C3500 Belts and Hoses
Find Your Specific 1990 GMC C3500 Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1990 C3500. Advance Auto Parts has popular C3500 parts like Belt Tensioners, Serpentine and V Belts, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other C3500 model years including
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1990 GMC C3500 Belts and Hoses below and start saving instantly.
Popular 1990 GMC C3500 Belts and Hoses Categories
Essential Belts and Hoses for 1990 GMC C3500s
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 7 Inch Length, 88432 (Part No.88432)
from
$16.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Quick-Lok Heater Hose Connector, 28502 (Part No.28502)
from
$32.49
Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.
See More
GM Genuine Parts – GM Genuine Parts Serpentine Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter, 12580773 (Part No.12580773)
from
$54.99
ACDelco GM Original Equipment Drive Belt Idler Pulleys are part of the accessory drive belt system on the front of your engine and are GM-recommended replacements for your vehicle’s original components. A pulley can be ribbed or smooth and contains a sealed ball-bearing. The idler pulley is used to divert the drive belt to components such as the alternator, water pump or power steering pump. This original equipment drive belt idler pulley has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60955K1 (Part No.D60955K1)
from
$102.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dorman – Dorman Engine Oil Cooler Line, 625-157 (Part No.625-157)
from
$68.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15"" Long, 1.50"" Diameter, C70752" (Part No.C70752)
from
$31.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Holley – Holley Small Block Chevy Mid-Mount Complete Accessory System, 20-240BK (Part No.20-240BK)
from
$2219.99
“The Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design, where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated.”
See More
Dorman – Help – Dorman – Help Fuel Hose Clamp Kit, 90099 (Part No.90099)
from
$11.99
This fuel hose clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Gates – Gates Premium Molded Coolant Hose, 22209 (Part No.22209)
from
$43.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – Idler Pulley, Dayco, 89007 (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
K&N – K&N Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter, 63-1007-1 (Part No.63-1007-1)
from
$367.99
The K&N AirCharger 63-1007-1 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1007-1 air intake places a round K&N high-flow air filter directly on top of the throttle body allowing large volumes of air to be pulled into the engine delivering a guaranteed gain in horse power. The oversized air filter is capped with an impressive chrome lid for added visual appeal under the hood. This air intake is relatively easy to install using commonly available tools. Not legal for sale or use in California on any pollution controlled motor vehicle.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999002A (Part No.999002A)
from
$64.99
“This Litens’ tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. The Litens aftermarket part meets original equipment specifications in form, fit, and function. While the many aftermarket tensioner suppliers remove the original damping element and change the pulley from steel to plastic, the Litens “”round spring”” tensioner maintains these original equipment components required for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note: This tensioner was supplied to the original equipment manufacturer by two different part suppliers. The tensioner being replaced may look different, but this Litens part replaces both variations. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 100.59 Long, 6 Rib Count, 1005K6 (Part No.1005K6)
from
$28.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dorman – Dorman Diesel Fuel Injection Return Hose and Clamps, 904-101 (Part No.904-101)
from
$44.99
This fuel hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
See More
Dayco – Dayco Bottom Cog V-Belt 44.5 Inch Long, Exact Fit Premium Quality, 15445 (Part No.15445)
from
$32.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
See More
GM Genuine Parts – GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (Part No.19258137)
from
$5.09
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60950K1 (Part No.D60950K1)
from
$102.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K1 (Part No.D60968K1)
from
$108.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dorman – Dorman Fuel Filler Neck Hose, 573-010 (Part No.573-010)
from
$52.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
Dorman – Dorman Fuel Filler Neck Hose, 573-020 (Part No.573-020)
from
$15.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.75"" Diameter, D71145" (Part No.D71145)
from
$15.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.75"" Long, 1.78"" Diameter, E71761" (Part No.E71761)
from
$70.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 1.25"" Diameter, E71035" (Part No.E71035)
from
$13.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Idler Pulley, Dayco, 89015 (Part No.89015)
from
$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter, 900031A (Part No.900031A)
from
$29.99
This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dorman – Dorman Idler Pulley (Pulley only), 419-602 (Part No.419-602)
from
$14.99
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Upgrade your 1990 GMC C3500 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1990 GMC C3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your C3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 96 Belts and Hoses for the 1990 GMC C3500, designed to meet your needs without breaking the bank.
From
Belt Tensioner
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1990 GMC C3500 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.29 to $317.99, with
an average price of $52.11.
Our 96 Belts and Hoses in stock come from 15 trusted brands, so you’re sure to find the right part for your 1990 GMC C3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 GMC C3500, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco, Dorman, Driveworks, and more.
Dayco Belts and Hoses
start at just $33.99 and boast an impressive 4.5 stars average rating from customers.
Dorman and Driveworks also bring quality to the table, with Belts and Hoses available starting at $14.99, and at an average 4.2 stars rating.
With 6,228 customer reviews and counting, our 1990 GMC C3500 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1990 GMC C3500 is always ready to roll. We’re committed to providing you with everything you need to keep your C3500 in top shape, all in one place.
Start shopping confidently below for your 1990 GMC C3500!
Best-Selling Belt Tensioners for 1990 GMC C3500s
Enhance the driving experience in your GMC with 5 quality Belt Tensioner components, starting at $58.99.
Dayco – Automatic Belt Tensioner, Dayco, 89201 (Part No.89201)
from
$70.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage €“ or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999002A (Part No.999002A)
from
$64.99
“This Litens’ tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. The Litens aftermarket part meets original equipment specifications in form, fit, and function. While the many aftermarket tensioner suppliers remove the original damping element and change the pulley from steel to plastic, the Litens “”round spring”” tensioner maintains these original equipment components required for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note: This tensioner was supplied to the original equipment manufacturer by two different part suppliers. The tensioner being replaced may look different, but this Litens part replaces both variations. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Dayco – Dayco Automatic Belt Tensioner, 89326 (Part No.89326)
from
$58.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Dayco – Dayco Automatic Belt Tensioner, 89202 (Part No.89202)
from
$59.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage €“ or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999025A (Part No.999025A)
from
$62.99
“This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “”O.E. Exact”””
See More
Most Popular 1990 GMC C3500 Serpentine and V Belts
Customize your GMC with 37 Serpentine and V Belts products
like Serpentine Belts,
V-Belts, and
Drive Belt Idler Assemblies, all
priced under $118.99.
Dayco – Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940 (Part No.5060940)
from
$56.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 5061020 (Part No.5061020)
from
$64.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Idler Pulley, Dayco, 89006 (Part No.89006)
from
$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Idler Pulley, Dayco, 89007 (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 95.5 Long, 6 Rib Count, 5060955 (Part No.5060955)
from
$75.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 95.5 Long, 6 Rib Count, 955K6 (Part No.955K6)
from
$54.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 940K6 (Part No.940K6)
from
$40.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 968K6 (Part No.968K6)
from
$38.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 101 Long, 6 Rib Count, 1010K6 (Part No.1010K6)
from
$35.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 1020K6 (Part No.1020K6)
from
$44.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 5060968 (Part No.5060968)
from
$64.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 101 Long, 6 Rib Count, 5061010 (Part No.5061010)
from
$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 97.05 Long, 6 Rib Count, 5060970 (Part No.5060970)
from
$60.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K061010HD (Part No.K061010HD)
from
$88.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 97.05 Long, 6 Rib Count, 970K6 (Part No.970K6)
from
$40.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60955K1 (Part No.D60955K1)
from
$102.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K061025HD (Part No.K061025HD)
from
$89.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060970 (Part No.K060970)
from
$68.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K1 (Part No.D60968K1)
from
$108.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060956 (Part No.K060956)
from
$66.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K061020HD (Part No.K061020HD)
from
$83.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K061025 (Part No.K061025)
from
$70.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Litens – Litens Serpentine Belt Drive Component Kit, LV999002B (Part No.LV999002B)
from
$118.99
This Litens Serpentine Belt Drive Component Kit fits 1988-1995 Chev Blazer,C1500,C2500,K1500,K2500 / GMC Jimmy,K1500,K2500 w/4.3/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Top Picks for 1990 GMC C3500 Heater Hoses
Upgrade GMC C3500s with top-quality Heater Hoses parts, including 8 OEM and aftermarket selections for your 1990 model.
Dorman – Dorman Heater Hose Connector, 800-401 (Part No.800-401)
from
$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance._
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length, 87615 (Part No.87615)
from
$44.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length, 80400 (Part No.80400)
from
$31.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dorman – Dorman Molded Heater Hose: Aluminum/Rubber, 626-569 (Part No.626-569)
from
$61.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6-1/2 Inch Length, 87852 (Part No.87852)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates ThermalPro Premium Molded Heater Hose, 18083 (Part No.18083)
from
$44.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Carquest Premium – Carquest Hose Connector, CH8004 (Part No.CH8004)
from
$14.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
See More
In-Demand Radiator Hoses for 1990 GMC C3500s
Select from 6 premium Radiator Hoses parts for your 1990 GMC C3500, with prices ranging from $1.29 to $64.99.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25"" Long, 1.50"" Diameter, D71428" (Part No.D71428)
from
$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.50"" Long, 1.25"" Diameter, E71425" (Part No.E71425)
from
$46.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25311 (Part No.25311)
from
$64.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Premium Molded Coolant Hose, 21770 (Part No.21770)
from
$48.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25532 (Part No.25532)
from
$45.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Most Sold 1990 GMC C3500 Fuel Hoses
Explore our best-selling GMC parts for the 1990 C3500 among 6 OEM and aftermarket options starting from $5.09.
Spectra Premium – Spectra Premium Fuel Filler Hose, FNH012 (Part No.FNH012)
from
$33.49
Spectra Premium fuel filler hoses are engineered, developed and validated by our in-house team of engineers ensuring it meet or exceed the OE specifications.
See More
Dorman – Dorman Diesel Fuel Injection Return Hose and Clamps, 904-101 (Part No.904-101)
from
$44.99
This fuel hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
See More
Dorman – "Dorman Metal Rubber Fuel Line: 58"" Long, 800-854" (Part No.800-854)
from
$127.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.
See More
Dorman – "Dorman Metal Rubber Fuel Line: 48"" Long, 800-853" (Part No.800-853)
from
$137.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.
See More
GM Genuine Parts – GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (Part No.19258137)
from
$5.09
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More
Dorman – Dorman Fuel Filler Neck Hose, 573-010 (Part No.573-010)
from
$52.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
Top-Rated Belts and Hoses Brands For Your 1990 GMC C3500
Shop for the best-rated brands offering Belts and Hoses and other products for your 1990 GMC C3500s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Dorman, and Driveworks, and more. Belts and Hoses from these brands that fit a 1990 C3500 start at just $14.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1990 GMC C3500 Belts and Hoses
When it comes to maintaining or upgrading your 1990 GMC C3500, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1990 GMC C3500. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.99, with an average price of just $51.99. Plus, with over 73 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$33.99
(2)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25"" Long, 1.50"" Diameter, D71426"
“Direct fit for 1999 5.7L Chevy Express Van”
from
$56.99
(44)
Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940
“Very happy that the parts I needed were available for pick up promptly”
from
$64.99
(27)
Dayco Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 5061020
“Perfect fit. Works good so far”
Popular Dorman 1990 GMC C3500 Belts and Hoses
Dorman auto parts is one of the highest quality Belts and Hose brands in the market. Any 1990 GMC C3500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1990 C3500, Advance Auto Parts carries a full inventory of 3 Dorman Belts and Hoses. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Belts and Hoses range from $14.99 to $127.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$14.99
(1)
Dorman Heater Hose Connector, 800-401
“excellent fit for my sons 1999 gmc suburban old one was worn out as you see in photo new one was great”
from
$44.99
(1)
Dorman Diesel Fuel Injection Return Hose and Clamps, 904-101
“I almost got robbed by the garage who wanted 390.00 for my kit that I paid [$] for.”
FAQs for 1990 GMC C3500 Belts and Hoses
Which Belts and Hoses are best-sellers for 1990 GMC C3500s?
Out of 96 Belts and Hoses that fit 1990 GMC C3500s, the following parts are the top sellers:
- Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900052A (10457738) – $31.99
- Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940 (3290157) – $56.99
- Dorman Heater Hose Connector, 800-401 (9110036) – $14.99
What’s the price range for 1990 GMC C3500 Belts and Hoses?
Belts and Hose prices for the 1990 GMC C3500 start at $1.29 and go up to $317.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1990 GMC C3500?
The average price for Belts and Hoses for the 1990 GMC C3500 is $52.11. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other GMC C3500 model years?
What are the cheapest Belts and Hoses for my 1990 GMC C3500?
The cheapest 1990 GMC C3500 Belts and Hoses we carry in stock are:
- Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (10844595) – $1.29
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (10505038) – $3.99
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (10505007) – $4.99
- GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (11930867) – $5.09
What are the top-rated Belts and Hoses that fit the 1990 GMC C3500?
Out of 6,228 reviews by customers, our 1990 GMC C3500 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1990 GMC C3500 and their top-rated products:
- Serpentine and V Belts
- Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940 (3290157) – $56.99
- Dayco Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 5061020 (3290176) – $64.99
- Dayco Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 5060968 (3290164) – $64.99
- Hose Fittings
- Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940 (3290157) – $56.99
- Dayco Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 5061020 (3290176) – $64.99
- Dayco Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 5060968 (3290164) – $64.99
- Belt Tensioners
- Dayco Poly Rib Belt Serpentine Belt 94.09 Long, 6 Rib Count, 5060940 (3290157) – $56.99
- Dayco Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 5061020 (3290176) – $64.99
- Dayco Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 5060968 (3290164) – $64.99
What types of Belts and Hoses do you sell for my 1990 GMC C3500?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 1990 GMC C3500:
Can I get help with 1990 GMC C3500 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC C3500 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC C3500 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
