1990 Ford F Super Duty Performance Ignition Products

Essential 1990 Ford F Super Duty Performance Ignition Products

MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)

Crank Trigger Kit; Big Block Ford

from

$538.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Absolutely the most accurate way to trigger the ignition
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
  • Incl. brackets/mounting hardware to fit a variety of engines
See More

Accel – 8Mm Super Stock Graphite Cust (Part No.4071)

8Mm Super Stock Graphite Cust

from

$72.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:
  • Graphite supression eliminates RFI/EMI
  • 3,000 to 7,000 ohms per foot of resistance
  • Silicone Spark Plug Boots
  • 450 Degree Temperature Rating
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

Coil; Street Fire; Ford TFI

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Bolt-on Performance
  • Factory replacement coil
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Accel – Ford Tfi Modulator 1983-96 (Part No.35368)

Ford Tfi Modulator 1983-96

from

$96.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Dwell Control Circuit
  • Resists False Triggering
See More

1990 Ford F Super Duty Performance Ignition Products

Maybe you’re in the middle of a full rebuild of that 1990 Ford F Super Duty. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 5 different Performance Ignition Products in our inventory ranging from $65.99 to $538.99. That means you can find the exact parts or products you need to keep that 1990 Ford F Super Duty running smoothly.

Performance Ignition Products are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Ford F Super Duty. Accel and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Ignition Products for your 1990 Ford F Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Ignition Products to keep your 1990 Ford F Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Ignition Products Brands To Make Your 1990 Ford F Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Ford F Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your F Super Duty the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.

Popular MSD Ignition Performance Ignition Products

We carry MSD Ignition parts in our stock across Performance Coils categories, plus more. For a 1990 Ford F Super Duty, our most popular MSD Ignition Performance Ignition Products include:
Coil; Street Fire; Ford TFI
from $65.99
(12)
Coil; Street Fire; Ford TFI
Performance Coils

Top 1990 Ford F Super Duty Performance Ignition Products from Accel

Accel products are another trusted brand when it comes to Performance Ignition Products for your 1990 Ford F Super Duty. Popular Accel parts include:
Ford 1984-98 Eec-Iv Supercoil
from $77.99
(28)
Ford 1984-98 Eec-Iv Supercoil
Performance Coils
Ford Tfi Modulator 1983-96
from $96.99
(3)
Ford Tfi Modulator 1983-96
Performance Ignition Modules

FAQs for 1990 Ford F Super Duty Performance Ignition Products

What are the most purchased Performance Ignition Products for the 1990 Ford F Super Duty?

Out of 5 Performance Ignition Products for the 1990 Ford F Super Duty, the most popular in our inventory are:
8Mm Super Stock Graphite Cust
from $72.99
This product is not rated
8Mm Super Stock Graphite Cust
Performance Spark Plug Wires
Crank Trigger Kit; Big Block Ford
from $538.99
This product is not rated
Crank Trigger Kit; Big Block Ford
Performance Ignition Systems