1990 Ford E-250 Econoline Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 1990 E-250 Econoline. Advance Auto Parts has popular E-250 Econoline parts like Transmission Mounts, Transmission Seals, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other E-250 Econoline model years including 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 and more. Select a category of 1990 Ford E-250 Econoline Transmission Parts below and start saving instantly.

Popular 1990 Ford E-250 Econoline Transmission Parts Categories

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Manual Transmission Differential Bearings

Gear Shift Rod Bushings

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Control Shaft Seals

Automatic Transmission Oil Pump Seals

Transmission Modulator Valves

Pinion Seals

Neutral Safety Switch Connectors

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic Transmission Wiring Harness Connectors

Shaft Seals

Transmission Shift Kits

Transmission Bands

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Fluid Filler Tube Seals

Extension Housing Gaskets

Remanufactured Automatic Transmissions

Automatic Transmission Friction Discs

Manual Transmission Bearing

Automatic Transmission Bushing Kits

Hardtop Seal Kit

Essential Transmission Parts for 1990 Ford E-250 Econolines

from

$19.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.49

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$73.99

This automatic transmission shift tube bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.99

AT OIL PUMP GASKET

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$104.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$389.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan!

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$21.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$12.99

AT EXT HOUSING SEAL

from

$3.99

AT SOLENOID SEAL

from

$71.99

Transhift cables connect the transmission selector lever/shifter to the transmission linkage. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Transhift cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Installs just like the original part

from

$7.99

AT CLUTCH PLATE

from

$156.99

AT OVERHAUL KIT

from

$72.99

AT SHIFT KIT

from

$62.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

AUTO TRANS BAND

from

$20.99

AT OIL PUMP SEAL

from

$40.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$5.49

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$7.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$579.99

AT MASTER REPAIR KIT

from

$6.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$21.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$24.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$188.99

AT CONTR SOLENOID

from

$151.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$299.99

The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.

Product Features:

Ideal As Column Shift Replacement
Includes Neutral Safety Switch
Includes Black T-Handle
Backup Light Not Available
Includes 5 ft. Cable and Hardware
Includes Boot and Plate

Upgrade your 1990 Ford E-250 Econoline with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1990 Ford E-250 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your E-250 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 128 Transmission Parts for the 1990 Ford E-250 Econoline, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1990 Ford E-250 Econoline at great prices. Our Transmission Parts inventory for this model ranges from just $2.99 to $2,597.99, with an average price of $210.68. Our 128 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1990 Ford E-250 Econoline without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Ford E-250 Econoline, we stock popular OEM and aftermarket Transmission Parts from top names like FELPRO, DriveWorks, Pro-King, and more. FELPRO Transmission Parts start at just $10.29 and boast an impressive 4.6 stars average rating from customers. DriveWorks and Pro-King also bring quality to the table, with Transmission Parts available starting at $10.99, and at an average 4.3 stars rating. With 2,591 customer reviews and counting, our 1990 Ford E-250 Econoline Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Ford E-250 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-250 Econoline in top shape, all in one place. Start shopping confidently below for your 1990 Ford E-250 Econoline!

Best-Selling Transmission Mounts for 1990 Ford E-250 Econolines

Enhance the driving experience in your Ford with 2 quality Transmission Mount components, starting at $15.99.

show more show less

from

$15.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 68-91;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-1991
Weight approx: 3 Lbs
MOUNT HOLES ON CENTER: 5.56 INCH/141.22 MM
STUDS ON CENTER: 2.71 INCH/68.83 MM
HEIGHT: 2.04 INCH/51.82 MM
MOUNT HOLES: 0.53 X 0.73 INCH/13.5 X 18.54 MM
STUD THREAD: 7/16 – 14 X 1.25

from

$27.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 87-22;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2022
Weight approx: 4 Lbs
MOUNT HOLES ON CENTER: 5.5 INCH /139.7 MM
STUDS ON CENTER: 2.70 INCH/68.58 MM
HEIGHT: 2.7 INCH/68.58 MM
STUDS AND MOUNT OFFSET: 0.25 INCH/6.1 MM

Top Picks for 1990 Ford E-250 Econoline Transmission Bearings

Upgrade Ford E-250 Econolines with top-quality Transmission Bearings parts, including 8 OEM and aftermarket selections for your 1990 model.

show more show less

from

$13.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$46.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$20.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

In-Demand Automatic Transmission Parts for 1990 Ford E-250 Econolines

Select from 25 premium Automatic Transmission Parts parts for your 1990 Ford E-250 Econoline, with prices ranging from $3.99 to $2,597.99.

show more show less

from

$7.99

AT SHF LINK BUSHING

from

$3.99

AT SOLENOID SEAL

from

$40.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$257.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

All blocks are pretested
All blocks are serialized

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

AT SHF LINK BUSHING

from

$48.99

AT MODULATOR VALVE

from

$38.99

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

Meets or exceeds OE fit, form and function

from

$19.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2597.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2597.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2474.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2474.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2349.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2319.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2319.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$2286.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1929.99

Product might not be available in all states due to local laws.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$25.99

AUTO TRANS BAND

Most Sold 1990 Ford E-250 Econoline Transmission Cooler and Parts

Explore our best-selling Ford parts for the 1990 E-250 Econoline among 11 OEM and aftermarket options starting from $25.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$151.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 1990 Ford E-250 Econoline

Shop for the best-rated brands offering Transmission Parts and other products for your 1990 Ford E-250 Econolines. Below you’ll find some of our best rated Transmission Parts from FELPRO, DriveWorks, and Pro-King, and more. Transmission Parts from these brands that fit a 1990 E-250 Econoline start at just $10.29 and are rated as high as 4.6 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1990 Ford E-250 Econoline Transmission Parts

When it comes to maintaining or upgrading your 1990 Ford E-250 Econoline, using quality Transmission Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Transmission Parts, specifically designed for the 1990 Ford E-250 Econoline. With over 3 FELPRO brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.29, with an average price of just $13.09. Plus, with over 48 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $10.29

(1)

Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket

“Deliver was so quick. Used right away.”

from $12.99

(1)

Transmission Oil Pan Gasket 17 Bolt Hole One Piece Gasket

“Packaged flat, so it installs easily. Works great.”

from $15.99

(46)

Transmission Oil Pan Gasket 20 Bolt Hole One Piece Gasket

“Felpro has always been a quality gasket manufacturer, a name well known in the automotive industry.”

Popular DriveWorks 1990 Ford E-250 Econoline Transmission Parts

DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 1990 Ford E-250 Econoline owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1990 E-250 Econoline, Advance Auto Parts carries a full inventory of 3 DriveWorks Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $10.99 to $13.99, plus, with more than 13 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $13.99

(3)

Tapered Cone Wheel Bearing Assembly

“This appears to be a well made bearing that fit perfectly.”

from $10.99

(2)

Oil Seal

“Doing good so far no leaks. Good price !”

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

FAQs for 1990 Ford E-250 Econoline Transmission Parts

Which Transmission Parts are best-sellers for 1990 Ford E-250 Econolines?

Out of 128 Transmission Parts that fit 1990 Ford E-250 Econolines, the following parts are the top sellers:

Tapered Cone Wheel Bearing Assembly (15040018) – $13.99
Multi-Purpose Seal (3271234) – $9.99
ABS sensor (12352245) – $32.99

What’s the price range for 1990 Ford E-250 Econoline Transmission Parts?

Transmission Part prices for the 1990 Ford E-250 Econoline start at $2.99 and go up to $2,597.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1990 Ford E-250 Econoline?

The average price for Transmission Parts for the 1990 Ford E-250 Econoline is $210.68. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford E-250 Econoline model years?

Yes, we currently carry Transmission Parts for 30 model years of Ford E-250 Econolines between 1975 and 2006. Transmission Parts are bought most frequently for the following model years: 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, and 1998.

What are the cheapest Transmission Parts for my 1990 Ford E-250 Econoline?

The cheapest 1990 Ford E-250 Econoline Transmission Parts we carry in stock are:

AT DPSTK TUBE SEAL (11236112) – $2.99
AT SOLENOID SEAL (11239035) – $3.99
Oil Seal (5440602) – $4.99
Automatic Shifter Bushing – O.D. 0.525 In.; I.D. 0.240 In.; Length 0.490 In. (22149556) – $5.49
AT CONTR SHAFT SEAL (11240381) – $6.99

What are the top-rated Transmission Parts that fit the 1990 Ford E-250 Econoline?

Out of 2,591 reviews by customers, our 1990 Ford E-250 Econoline Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1990 Ford E-250 Econoline and their top-rated products:

Transmission Electrical Parts
- Vehicle Speed Sensor Connector (20974573) – $16.05
- ABS Wheel Speed Sensor (25987068) – $29.99
Automatic Transmission Pan and Gaskets
- Vehicle Speed Sensor Connector (20974573) – $16.05
- ABS Wheel Speed Sensor (25987068) – $29.99
Transmission Cooler and Parts
- Vehicle Speed Sensor Connector (20974573) – $16.05
- ABS Wheel Speed Sensor (25987068) – $29.99

What types of Transmission Parts do you sell for my 1990 Ford E-250 Econoline?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1990 Ford E-250 Econoline:

Can I get help with 1990 Ford E-250 Econoline Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford E-250 Econoline Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford E-250 Econoline Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Ford E-250 Econoline Transmission Parts

Carquest Premium – Multi-Use Connector (Part No.PTC1532)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

Dorman – Steering Column Shift Tube Bushing Kit (Sold by kit) (Part No.905-103)

ATP – AT OIL PUMP GASKET (Part No.LG-4)

National – Multi-Purpose Seal (Part No.470059)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM127)

B & M – Cast Deep Transmission Deep For Ford, E4OD, 5R100, 4R100 (Part No.40295)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-253)

ATP – AT EXT HOUSING SEAL (Part No.LO-42)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – Automatic Transmission Shifter Cable (Part No.Y-784)

ATP – AT CLUTCH PLATE (Part No.FC-105)

ATP – AT OVERHAUL KIT (Part No.FGS-36)

ATP – AT SHIFT KIT (Part No.FK-6)

Carquest – Neutral Safety Switch (Part No.S9194)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-382-A)

ATP – AUTO TRANS BAND (Part No.LX-2)

ATP – AT OIL PUMP SEAL (Part No.LO-29)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-23)

Dorman – Help – Automatic Shifter Bushing – O.D. 0.525 In.; I.D. 0.240 In.; Length 0.490 In. (Part No.74040)

Dorman – Transmission Line Connector with 5/16 In. Tube X 1/4-18 In. Thread (Part No.800-609)

ATP – AT MASTER REPAIR KIT (Part No.LM-13)

National – Multi-Purpose Seal (Part No.7929S)

National – Manual Transmission Output Shaft Seal (Part No.450519)

Motive Gear – Differential Pinion Seal (Part No.6808N)

ATP – AT CONTR SOLENOID (Part No.FE-23)

Imperial – Transmission Oil Cooler (Part No.241015)

B & M – Automatic Shifter, Unimatic Shifter (Part No.80775)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2448)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2557)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Automatic Transmission Extension Housing Seal Kit (Part No.5203)

National – Multi-Purpose Seal (Part No.7692S)

National – Multi-Purpose Seal (Part No.331107N)

Driveworks – Oil Seal (Part No.S-7692S)

National – Multi-Purpose Seal (Part No.3404)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

National – Multi-Purpose Seal (Part No.7929S)

ATP – AT DPSTK TUBE SEAL (Part No.SO-33)

National – Multi-Purpose Seal (Part No.719316)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

Motive Gear – Differential Pinion Seal (Part No.6808N)

ATP – AT EXT HOUSING SEAL (Part No.FO-199)

ATP – AT OIL PUMP SEAL (Part No.FO-191)

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-15101)

Driveworks – Taper Bearing Cup (Part No.S-15245)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-382-A)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

FAG US – Cone (Part No.K387-A)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

FAG US – Cone (Part No.KLM603049)

FAG US – Cup (Part No.382A)

ATP – AT SHF LINK BUSHING (Part No.FO-405)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-23)

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS103)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

ATP – AT SHF LINK BUSHING (Part No.FO-300)

ATP – AT MODULATOR VALVE (Part No.FX-194)

Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-36)

Carquest Premium – Multi-Use Connector (Part No.PTC1532)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162102)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162101)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162113)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162114)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162109)

Moveras – E4OD – Automatic Transmission (Part No.M01697)

Moveras – E4OD – Automatic Transmission (Part No.M01210)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162130)

Moveras – E4OD – Automatic Transmission (Part No.M01547AB)

Moveras – E4OD – Automatic Transmission (Part No.M01532AA)

Moveras – E4OD – Automatic Transmission (Part No.M01532AB)

Moveras – E4OD – Automatic Transmission (Part No.M00825)

Moveras – E4OD – Automatic Transmission (Part No.M01547AA)

Moveras – E4OD – Automatic Transmission (Part No.M01437)

ATP – AUTO TRANS BAND (Part No.LX-2)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)