1990 Ford Bronco II Performance and Racing Products
Find Your Specific 1990 Ford Bronco II Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1990 Bronco II. Advance Auto Parts has popular Bronco II parts like Performance Ignition Products, Performance Suspension Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Bronco II model years including
1984,
1985,
1986,
1987,
1988,
1989 and more. Select a category of 1990 Ford Bronco II Performance and Racing Products below and start saving instantly.
Popular 1990 Ford Bronco II Performance and Racing Products Categories
Essential Performance and Racing Products for 1990 Ford Bronco IIs
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Energy Suspension – Axle Pivot Bushing Set (Part No.4.3133G)
from
$44.49
Product Features:
See More
- Firm in the Center Yet Soft on the Outside
- Allows Flex and Pivot When Needed
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2024)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Powertrax – Lock Right Locker (Part No.1820-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
B & M – Transmission Shift Kit (Part No.40227)
from
$213.99
Transpak – Ford, Lincoln, Mercury – 1980 to 1992 AOD (excludes 1992 and later with electronic shift). Recalibrate your automatic transmission for optimum performance. Select the mode that best suits your application. Improves transmission life. Transmission removal not required. The next step up from the Shift Improver Kit is the Transpak. It has all the features in the Shift Improver Kit plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 and Chrysler Torqueflite only). Most stock automatic transmissions won’t downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1 Heavy Duty – For street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort. Normal automatic operation when in Drive. Stage 2 Hi-Performance Street – For full performance street use. Essentially the same as Heavy Duty mode except shift is much quicker. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mr. Gasket – Differential Cover Kit (Part No.9893G)
from
$89.99
Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.
Product Features:
See More
Product Features:
- Chrome plated steel for looks
- Includes bolts and gasket
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$40.49
Brake Bleeder Screws
B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)
from
$483.99
The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H
Product Features:
See More
Product Features:
- All One-Handed
- Reverse Lockout Meets NHRA And IHRA Requirements
- Mount Directly To Floor/Chassis/Or w/Quick Release
- Ultimate For Powerglide Applications
- Lightweight Brushed Alum. Cover
- Cover Removed Quickly and Easily
- Includes 5 Ft. Super Duty Race Cable
- Quick Change Plate Design
B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)
from
$382.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s
Product Features:
See More
Product Features:
- Ratchet Action Shifter
- Cable Operated
- Quick Installation
- Accurate Shifting
- Reverse Lockout Feature
B & M – CONVERTER AOD HP (Part No.40437)
from
$366.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2129R)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2137G)
from
$23.49
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2133R)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Rancho – Steering Damper Kit (Part No.RS97481)
from
$117.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for a variety of Ford trucks and SUVs
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
Motive Gear – Performance Differential Ring and Pinion (Part No.F875456)
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Energy Suspension – TransMt (Part No.4.1148G)
from
$79.99
TransMt
Upgrade your 1990 Ford Bronco II with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1990 Ford Bronco II, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Bronco II functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Performance and Racing Products for the 1990 Ford Bronco II, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Suspension Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1990 Ford Bronco II at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $23.49 to $483.99, with
an average price of $130.37.
Our 26 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 1990 Ford Bronco II without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Ford Bronco II, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, MSD Ignition, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
K&N and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $68.99, and at an average 4.8 stars rating.
With 71 customer reviews and counting, our 1990 Ford Bronco II Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1990 Ford Bronco II is always ready to roll. We’re committed to providing you with everything you need to keep your Bronco II in top shape, all in one place.
Start shopping confidently below for your 1990 Ford Bronco II!
Best-Selling Performance Ignition Products for 1990 Ford Bronco IIs
Enhance the driving experience in your Ford with 4 quality Performance Ignition Product components, starting at $73.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)
from
$86.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Fd-478
- MSD 5527
- Standard Motor Products SMP Fd-478
- MSD 5527
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)
from
$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Factory replacement coil
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Popular 1990 Ford Bronco II Performance Suspension Products
Customize your Ford with 8 Performance Suspension Products products
like Performance Leaf Spring Bushings and
Performance Axle Pivot Bushings, all
priced under $73.99.
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2137R)
from
$23.49
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2137G)
from
$23.49
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Axle Pivot Bushing Set (Part No.4.3133G)
from
$44.49
Product Features:
See More
- Firm in the Center Yet Soft on the Outside
- Allows Flex and Pivot When Needed
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2134G)
from
$73.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2133R)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2129G)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2133G)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.4.2129R)
from
$25.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Top Picks for 1990 Ford Bronco II Performance Engines
Upgrade Ford Bronco IIs with top-quality Performance Engines parts, including 1 OEM and aftermarket selections for your 1990 model.
B & M – CONVERTER AOD HP (Part No.40437)
from
$366.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
In-Demand Performance Air Filters for 1990 Ford Bronco IIs
Select from 1 premium Performance Air Filters parts for your 1990 Ford Bronco II.
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2024)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Most Sold 1990 Ford Bronco II Performance Steering Products
Explore our best-selling Ford parts for the 1990 Bronco II among 1 OEM and aftermarket options starting from $117.99.
Rancho – Steering Damper Kit (Part No.RS97481)
from
$117.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY – Designed for a variety of Ford trucks and SUVs
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
- BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty
Top-Rated Performance and Racing Products Brands For Your 1990 Ford Bronco II
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1990 Ford Bronco IIs. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1990 Bronco II start at just $68.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1990 Ford Bronco II Performance and Racing Products
When it comes to maintaining or upgrading your 1990 Ford Bronco II, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1990 Ford Bronco II. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1990 Ford Bronco II Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1990 Ford Bronco II owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1990 Bronco II, Advance Auto Parts carries a full inventory of 1 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $68.99, plus, with more than 9 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$68.99
(9)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
“Great Product!
Hey, my car is a ’92 Ford Taurus with a V6 3.8L engine. I’ve been reading about your filters and your performance gains on the websit”
FAQs for 1990 Ford Bronco II Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1990 Ford Bronco IIs?
Out of 26 Performance and Racing Products that fit 1990 Ford Bronco IIs, the following parts are the top sellers:
- Coil; Street Fire; Ford TFI (6900028) – $73.99
- Leaf Spring Bushing Set (22908056) – $23.49
- Leaf Spring Bushing Set (22908057) – $23.49
What’s the price range for 1990 Ford Bronco II Performance and Racing Products?
Performance and Racing Product prices for the 1990 Ford Bronco II start at $23.49 and go up to $483.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1990 Ford Bronco II?
The average price for Performance and Racing Products for the 1990 Ford Bronco II is $130.37. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Bronco II model years?
What are the cheapest Performance and Racing Products for my 1990 Ford Bronco II?
The cheapest 1990 Ford Bronco II Performance and Racing Products we carry in stock are:
- Leaf Spring Bushing Set (22908056) – $23.49
- Leaf Spring Bushing Set (22908057) – $23.49
- Leaf Spring Bushing Set (22908064) – $25.99
- Leaf Spring Bushing Set (22908073) – $25.99
- Leaf Spring Bushing Set (22908065) – $25.99
What are the top-rated Performance and Racing Products that fit the 1990 Ford Bronco II?
Out of 71 reviews by customers, our 1990 Ford Bronco II Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1990 Ford Bronco II and their top-rated products:
- Performance Air Filters
- Performance Radiators
What types of Performance and Racing Products do you sell for my 1990 Ford Bronco II?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1990 Ford Bronco II:
Can I get help with 1990 Ford Bronco II Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Bronco II Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Bronco II Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
