1990 Chevrolet S10 Blazer Torque Converter and Related Products
More 1990 Chevrolet S10 Blazer Torque Converter and Related Products
Find your specific 1990 Chevrolet S10 Blazer original or aftermarket Torque Converter and Related Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Chevrolet S10 Blazer Torque Converter and Related Products
ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)
from
$27.99
You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.
Product Features:
See More
Product Features:
- Super Strong, Rated At 200,000 PSI
- Kits Come With Hardened Parallel Ground Washers
- Made In USA
- 0.590″ Underhead Length
- M10 X 1.5 Thread Size
- Set of 6
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid Connector (Part No.PTA2558)
from
$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Automatic Transmission Torque Converter Connector (Part No.PTA1431)
from
$14.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Electrical Harness – 3-Wire Transmission Converter Clutch (Part No.85182)
from
$19.99
This automatic transmission torque convertor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission torque connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4949)
from
$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Automatic Transmission Control Solenoid (Part No.S9811)
from
$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
National – Multi Purpose Seal (Part No.4950)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-4950)
from
$4.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Oil Seal (Part No.S-3227)
from
$3.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM61HD)
from
$116.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
B & M – Torque Converter, Nitrous Holeshot 2400 (Part No.20480)
from
$512.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- 2300-2500 RPM
- Small And Big Blocks
- Mild To Serious Performance
- Furnace Brazed
- Fully Balanced
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM18A)
from
$178.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
B & M – Tork Master 2400 (Part No.70418)
from
$420.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$502.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM58HD)
from
$174.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
Popular 1990 Chevrolet S10 Blazer Torque Converter and Related Products Categories
1990 Chevrolet S10 Blazer Torque Converter and Related Products
Maybe you’re in the middle of a full rebuild of that 1990 Chevrolet S10 Blazer. Maybe you just need a couple of Torque Converter and Related Products. Either way, Advance Auto Parts has 12 different Torque Converter and Related Products in our inventory ranging from $3.49 to $604.99. That means you can find the exact parts or products you need to keep that 1990 Chevrolet S10 Blazer running smoothly.
Torque Converter and Related Products are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Chevrolet S10 Blazer. DriveWorks, National, and Pro-King are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Torque Converter and Related Products for your 1990 Chevrolet S10 Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Torque Converter and Related Products to keep your 1990 Chevrolet S10 Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Torque Converter and Related Products Brands To Make Your 1990 Chevrolet S10 Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Chevrolet S10 Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Torque Converter and Related Products make up Advance Auto Parts’ inventory, and all are ready to help make your S10 Blazer the best it can be. Be sure to browse some of our top Torque Converter and Related Products brands and parts.
Popular National Torque Converter and Related Products
We carry National parts in our stock across Torque Converter Seals categories, plus more. For a 1990 Chevrolet S10 Blazer, our most popular National Torque Converter and Related Products include:
Top 1990 Chevrolet S10 Blazer Torque Converter and Related Products from Driveworks
Driveworks products are another trusted brand when it comes to Torque Converter and Related Products for your 1990 Chevrolet S10 Blazer. Popular Driveworks parts include:
FAQs for 1990 Chevrolet S10 Blazer Torque Converter and Related Products
What are the most purchased Torque Converter and Related Products for the 1990 Chevrolet S10 Blazer?
Out of 12 Torque Converter and Related Products for the 1990 Chevrolet S10 Blazer, the most popular in our inventory are:
from
$178.99
(3)
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$37.05
This product is not rated
Automatic Transmission Control Solenoid
Automatic Transmission Torque Converter Clutch Solenoids
from
$14.79
This product is not rated
Automatic Transmission Torque Converter Connector
Automatic Transmission Torque Converter Connectors
