1990 Chevrolet Lumina Apv Ignition Sensors
More 1990 Chevrolet Lumina Apv Ignition Sensors
Find your specific 1990 Chevrolet Lumina Apv original or aftermarket Ignition Sensors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Chevrolet Lumina Apv Ignition Sensors
GM Genuine Parts – Multi-Purpose Threaded Plug (Part No.14084945)
from
$9.99
GM Genuine Parts Multi Purpose Threaded Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Delphi – Knock Sensor (Part No.AS10013)
from
$41.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Carquest Premium – Ignition Knock (Detonation) Sensor W/ Thread Sealant (Part No.SBC3718)
from
$39.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor W/ Thread Sealant (Part No.SBC3712)
from
$39.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Flat Response Knock Sensor (Part No.F6020203432DEL)
from
$51.19
As a global leader in engine and powertrain management systems technology, Delphi manufactures a Flat Response Engine Knock Sensor that is 100 percent OE, providing an exact fit and superior quality. The Delphi Flat Response Knock Sensor has a flat frequency response over a range of from 1 to 18 kHz, thus the same sensor can be used on different engines by simply adjusting the filter frequency of the signal processing electronics to match the knock frequency of the engine. In addition, the sensor responds to knock frequencies higher than the primary knock frequency. This allows the higher knock frequencies to be used by a control system, either individually or combined with the primary knock frequency
Product Features:
See More
Product Features:
- Self-generating piezoelectric design requires no power to the sensor
- Flat frequency response allows the same senor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Large mounting hole accommodates mounting bolts up to 10mm in diameter
Delphi – Knock Sensor (Part No.AS10014)
from
$44.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3704)
from
$36.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4096)
from
$54.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1990 Chevrolet Lumina Apv Ignition Sensors Categories
1990 Chevrolet Lumina Apv Ignition Sensors
Maybe you’re in the middle of a full rebuild of that 1990 Chevrolet Lumina Apv. Maybe you just need a couple of Ignition Sensors. Either way, Advance Auto Parts has 3 different Ignition Sensors in our inventory ranging from $9.99 to $44.49. That means you can find the exact parts or products you need to keep that 1990 Chevrolet Lumina Apv running smoothly.
Ignition Sensors are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Chevrolet Lumina Apv. Carquest Premium, Delphi, and GM Genuine are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Sensors for your 1990 Chevrolet Lumina Apv, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Sensors to keep your 1990 Chevrolet Lumina Apv rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Sensors Brands To Make Your 1990 Chevrolet Lumina Apv Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Chevrolet Lumina Apv demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Lumina Apv the best it can be. Be sure to browse some of our top Ignition Sensors brands and parts.
FAQs for 1990 Chevrolet Lumina Apv Ignition Sensors
What are the most purchased Ignition Sensors for the 1990 Chevrolet Lumina Apv?
Out of 3 Ignition Sensors for the 1990 Chevrolet Lumina Apv, the most popular in our inventory are:
from
$9.99
This product is not rated
Multi-Purpose Threaded Plug
Ignition Knock (Detonation) Sensor Hole Plug
