1990 Chevrolet Camaro Fuel and Emissions Systems

Name: Multi-Use Connector
Brand: Carquest Premium
SKU: PTA1096
Price: 44.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 1990 Camaro. Advance Auto Parts has popular Camaro parts like Gas Caps, Fuel Pumps, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Camaro model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1990 Chevrolet Camaro Fuel and Emissions Systems below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1990 Chevrolet Camaro Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Gas Caps

Ambient Air Temperature Sensor Bolts

Fuel Pumps

Oxygen Sensors

Fuel Pump Block-Off Plate Gaskets

MAP-Barometric Pressures

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Mass Air Flow Sensor Relays

Pressure Regulators

Pre-Heater Ducts

Air Charge Temperature Sensors

Fuel Injection Idle Air Control Valves

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Pressure Regulator Kits

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Injector Connectors

Fuel Tank Sending Units

Oxygen Sensor Connectors

Idle Air Control Valve Connectors

EGR Valve Gaskets

Fuel Injection Fuel Pressure Regulator Diaphragms

Fuel Pump Harness Connectors

Fuel Sender Control Module Connector

Fuel Cap Tester Adapters

Fuel Line Seal Rings

Air Injection Bypass Valve Solenoid Connector

Mass Air Flow Sensor Relay Connector

Diverter Valve Connectors

Essential Fuel and Emissions Systems for 1990 Chevrolet Camaros

from

$44.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$204.99

Holley Billet Fuel Pressure Regulators are part of a complete line of fuel system products from Holley. They are precision machined from 6061-T6 billet aluminum for strength and durability. They feature a black bright dip anodized body and a clear bright dip anodized top for corrosion resistance and good looks. Holley Billet Fuel Pressure Regulators are available in a variety of configurations.

Product Features:

Adjustable From 35-65 PSI
CNC Machined Billet Aluminum
Clear anodized For Good Looks and Corrosion Protection
Bolts In Stock Location For Ease Of Installation

from

$165.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$54.99

New Goodmark Fuel Filler Neck

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Fuel Tank Strap Hardware Kit, Consists Of Bolts, Nuts, Washers, And Screws

Product Features:

Consists Of Bolts Nuts Washers And Screws
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$89.99

ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$85.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
Provides superior fit resulting in an easier installation
Maximizes fuel and engine efficiency
Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions

from

$25.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$26.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$37.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

Filtration performance meets or exceeds OE requirements
Micron rating meets or exceeds OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$12.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components. Use CARQUEST tool kit ATK-001 or equivalent for proper installation of combustion seal.

Product Features:

Premium OE quality materials
Includes upper O-ring
Includes nylon split ring
Includes combustion seal

from

$7.29

This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$39.99

Dorman offers a comprehensive line of Idle Air Control Valve Connectors for a wide range of applications. All our Idle Air Control Valve Connectors are constructed of high-quality materials for long-lasting durability. We also offer a full selection of electrical terminals to complete the job.

Product Features:

Appropriate for 4-wire configurations.
Direct replacement Idle Air Control Valve Connectors available (where applicable) to ensure a proper fit
Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance
Easy installation-just splice in the new socket to your existing wiring

from

$145.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

No spacers or washers are required and they come with gaskets for an exact fit, saving time and labor
All Delphi parts are validated, tested and matched to the vehicle application, and manufactured in a Delphi ISO certified facility
Delphi’s OE line of EGR valves provides accurate exhaust flow and emission control
Available in port, back pressure, and linear configurations to cover many engine applications
Designed and built using high temperature and corrosion resistant materials that perform exceptionally under all engine environments
Each valve and seat is precision machined, helping to maintain long term stability and performance
No audible regulator noise

from

$39.99

The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$8.29

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$53.99

TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:

Free Flow: 80 GPH
Pressure: 6 PSI
Housing Material: Aluminum
Inlet and Outlet: 1/4 in NPT Female

from

$125.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$69.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:

Application matched components ensure fuel injection system meets all emission regulations.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$99.99

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$4.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$42.49

Application matched components ensure fuel injection system meets all emission regulations.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$47.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 1990 Chevrolet Camaro with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 107 Fuel and Emissions Systems for the 1990 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Gas Cap replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1990 Chevrolet Camaro at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.49 to $634.99, with an average price of $110.86. Our 107 Fuel and Emissions Systems in stock come from 18 trusted brands, so you’re sure to find the right part for your 1990 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Chevrolet Camaro, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Felpro, Dorman, Delphi, and more. Felpro Fuel and Emissions Systems start at just $3.99 and boast an impressive 4.6 stars average rating from customers. Dorman and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $7.29, and at an average 4.2 stars rating. With 773 customer reviews and counting, our 1990 Chevrolet Camaro Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 1990 Chevrolet Camaro!

Best-Selling Gas Caps for 1990 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 2 quality Gas Cap components, starting at $11.99.

show more show less

from

$19.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

Most Popular 1990 Chevrolet Camaro Fuel Pumps

Customize your Chevrolet with 20 Fuel Pumps products like Fuel Pumps, Electric Pump Filter and Strainers, and Fuel Pump Block-Off Plate Gaskets, all priced under $476.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$79.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$27.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$13.99

Filtration performance meets or exceeds OE requirements
Micron rating meets or exceeds OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$129.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$48.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$9.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$58.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$72.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$56.99

New Platinum Pro Electric Fuel Pump, Digital Dash, New Strainer Required For Warranty

Product Features:

Digital Dash
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$78.99

New Platinum Pro Electric Fuel Pump, New Strainer Required For Warranty

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$79.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$476.99

EFI FUEL PUMPS

from

$388.99

The Holley line of high output in-tank electric fuel pumps is available in flow ratings of 190 and 255 liters of fuel per hour. A 155 liter per hour Mustang pump is available along with 255 liter per hour rated pumps for “forced induction” applications. These particular pumps flow significantly more fuel at high pressure. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At the same 80 PSI the equivalent forced induction pump will flow over 210 liters (50 gallons) per hour. Holley in-tank electric pumps utilize a proven geroter design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. Coverage includes most popular Ford, General Motors, Chrysler and import applications. These are complete fuel pump kits and include all accessories and installation instructions. Also includes is an inlet filter that meets or exceeds original equipment specifications and provides improved filtration and durability.

Product Features:

255 lph Feeds Up To 750 Hp At 60 PSI
Proven Gerotor Design
Compact Enough To Fit In Existing Hanger Assemblies
Complete Kit w/Drop Parts Accessories/Instructions
Inlet Filter For Improved Filtration/Durability

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$28.99

Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:

Made From Premium Grade Aerospace Chrome Moly
Center Less Ground To Precise Diameter
Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
Provide With Required Reliability And Improved Performance

from

$26.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 1990 Chevrolet Camaro Oxygen Sensors

Upgrade Chevrolet Camaros with top-quality Oxygen Sensors parts, including 5 OEM and aftermarket selections for your 1990 model.

show more show less

from

$73.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$39.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$39.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$73.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

In-Demand Fuel Injectors for 1990 Chevrolet Camaros

Select from 31 premium Fuel Injectors parts for your 1990 Chevrolet Camaro, with prices ranging from $8.29 to $634.99.

show more show less

from

$8.29

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$204.99

Adjustable From 35-65 PSI
CNC Machined Billet Aluminum
Clear anodized For Good Looks and Corrosion Protection
Bolts In Stock Location For Ease Of Installation

from

$485.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$59.99

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$59.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$43.99

Pigtail connector allows replacement of damaged fuel injector connector.

from

$511.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$31.49

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$511.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$511.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$94.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$562.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$74.99

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$55.99

from

$15.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$562.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$534.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$614.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$634.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Accurate Metering Control Even At Ultra-Low And High Duty Cycles

from

$511.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$105.99

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$101.99

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$94.99

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

Most Sold 1990 Chevrolet Camaro Air Flow Sensors

Explore our best-selling Chevrolet parts for the 1990 Camaro among 9 OEM and aftermarket options starting from $1.49.

show more show less

from

$37.99

ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$17.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$68.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$85.99

ACDelco GM Original Equipment Manifold Absolute Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$77.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$37.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed fitment
Replacement of failed relay instantly restores proper electrical circuit performance
Direct-fit OE reproduction design for easy plug-and-play installation
Manufactured using high-quality materials to withstand intense vehicle heat and cold-weather condensation that can damage lesser quality relays
Modern electronics resist electrical arcing and burnout for long-term reliability
Factory tested for proper performance

Top-Rated Fuel and Emissions Systems Brands For Your 1990 Chevrolet Camaro

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1990 Chevrolet Camaros. Below you’ll find some of our best rated Fuel and Emissions Systems from Felpro, Dorman, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 1990 Camaro start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1990 Chevrolet Camaro Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1990 Chevrolet Camaro, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Fuel and Emissions Systems, specifically designed for the 1990 Chevrolet Camaro. With over 2 Felpro brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99. Plus, with over 53 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $3.99

(27)

Exhaust Gas Recirculation (EGR) Valve Gasket

“So I had to replace this when I pulled the EGR to replace the cam plug seal. Easy enough. Just make sure both mating surfaces are plenty clean to ensu”

Popular Dorman 1990 Chevrolet Camaro Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1990 Chevrolet Camaro owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1990 Camaro, Advance Auto Parts carries a full inventory of 3 Dorman Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range from $7.29 to $17.29, plus, with more than 7 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $7.29

(2)

Fuel Pump Lock Ring

“I always get good brand of parts for this company which means alot”

from $8.29

(2)

Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum

“on my cobra kit car i’m having to piece together a custom hose configuration since i have to use a chevy radiator with my 351w. i used the hose to moc”

from $17.29

(3)

Fuel Sending Unit Retainer Assortment

“As described”

FAQs for 1990 Chevrolet Camaro Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1990 Chevrolet Camaros?

Out of 107 Fuel and Emissions Systems that fit 1990 Chevrolet Camaros, the following parts are the top sellers:

Fuel Pump Mounting Gasket (5183804) – $3.99
Multi-Purpose Temperature Sensor (15730286) – $37.99
Electric Fuel Pump: Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness (20772154) – $79.99

What’s the price range for 1990 Chevrolet Camaro Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1990 Chevrolet Camaro start at $1.49 and go up to $634.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1990 Chevrolet Camaro?

The average price for Fuel and Emissions Systems for the 1990 Chevrolet Camaro is $110.86. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Camaro model years?

Yes, we currently carry Fuel and Emissions Systems for 49 model years of Chevrolet Camaros between 1967 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 1990 Chevrolet Camaro?

The cheapest 1990 Chevrolet Camaro Fuel and Emissions Systems we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Exhaust Gas Recirculation (EGR) Valve Gasket (12481993) – $1.49
Exhaust Gas Recirculation (EGR) Valve Gasket (3207900) – $3.49
Fuel Feed Pipe O-Ring (15730384) – $3.49
Fuel Pump Mounting Gasket (5183804) – $3.99

What types of Fuel and Emissions Systems do you sell for my 1990 Chevrolet Camaro?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 1990 Chevrolet Camaro:

Can I get help with 1990 Chevrolet Camaro Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Camaro Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Chevrolet Camaro Fuel and Emissions Systems

Carquest Premium – Multi-Use Connector (Part No.PTA1096)

Holley – EFI Fuel Pressure Regulator (Part No.512-501)

GM Genuine Parts – Oxygen Sensor: 4 Wires, 233 mm Long, Heated, Exact Fit (Part No.213-4575)

KAI – Fuel Filler Neck (Part No.GMK402075367)

KAI – Fuel Tank Strap (Part No.GMK401174967S)

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-796)

Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10019)

Carquest Premium – Fuel Pump Pulsator (Part No.A3541776)

Carquest Premium – Multi-Use Connector (Part No.PTA1553)

Carquest Premium – Multi-Use Connector (Part No.PTA1174)

Delphi – Fuel Pump Strainer (Part No.FS0031)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS057)

Dorman – Fuel Pump Lock Ring (Part No.579-001)

Dorman – 4-Wire Idle Air Control Valve (Part No.85112)

Delphi – EGR Valve (Part No.EG10501)

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Dorman – Help – Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum (Part No.96022)

Top Street Performance – Black Chevy Small Block V8 (262-400) Two-Valve 80 GPH 8 PSI Mechanical Fuel Pump (Part No.JM1003BK)

GM Genuine Parts – Fuel Injector O-Ring Kit with Seals and Spacers (Part No.217-3399)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator 5G1038 (Part No.5G1038)

Carquest Premium – Idle Air Control Valve (Part No.ACA1057)

Carquest Premium – Fuel Pump Push Rod (Part No.PR2584015)

Wells Vehicle Electronics – Fuel Injection Fuel Pressure Regulator Diaphragm (Part No.3G1095)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest Premium – Multi-Use Connector (Part No.PTA1687)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61824)

Carquest Premium – Locking Fuel Tank Cap (Part No.10594)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10822)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Delphi – Electric Fuel Pump: Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness (Part No.FE0115)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219663)

Delphi – Fuel Pump Strainer (Part No.FS0177)

Delphi – Electric Fuel Pump: Grommet, Insulating Sleeve, Isolator, Pump Retainer (Part No.FE0110)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219651)

Carquest Premium – Fuel Pump Strainer (Part No.FS260352)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219654)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219655)

KAI – Electric Fuel Pump (Part No.FMD010049)

Carquest Premium – Fuel Pump Pulsator (Part No.A3541776)

KAI – Electric Fuel Pump (Part No.FMD010061)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E260147)

Holley EFI – EFI FUEL PUMPS (Part No.12-328)

Holley – Electric Fuel Pump; In-Tank Electric Fuel Pump (Part No.12-914)

Carquest Premium – Multi-Use Connector (Part No.PTA1383)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Carquest Premium – Multi-Use Connector (Part No.PTA1553)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

NTK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.21002)

Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)

Dorman – Help – Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum (Part No.96022)

Holley – EFI Fuel Pressure Regulator (Part No.512-501)

Accel – 6-Pack Performance Fuel Injectors 6-Pack: Improved Efficiency and Cleaner Engine (Part No.150615)

Carquest Premium – Remanufactured T/B Fuel Injector (Part No.A114-1033)

Carquest Premium – Remanufactured Multi Port Fuel Injector (Part No.A211-1163)

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Accel – Perf Fuel Injectors 24Lb 8-Pak (Part No.150824)

GM Genuine Parts – Fuel Injector O-Ring Kit with 8 Bushings and 16 O-Rings (Part No.217-3102)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Accel – Perf Fuel Injectors 30Lb 8-Pak (Part No.150830)

Accel – Perf Fuel Injectors 19Lb 8-Pak (Part No.150819)

Accel – Perf Fuel Injector 15Lb Each (Part No.150115)

Accel – Perf Fuel Injectors 21Lb 8-Pak (Part No.150821)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10388)

Wells Vehicle Electronics – Fuel Injection Fuel Pressure Regulator Diaphragm (Part No.3G1097)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 93020-1)

Accel – Perf Fuel Injectors 36Lb 8-Pak (Part No.150836)

Accel – Perf Fuel Injectors 23Lb 8-Pak (Part No.150823)

Accel – Perf Fuel Injectors 48Lb 8-Pak (Part No.150848)

Accel – Perf Fuel Injector 44Lb 8-Pak (Part No.150844)

Accel – High-Flow 26lb Fuel Injectors (8-Pack) – Improved Performance (Part No.150826)

Delphi – Fuel Injector (Part No.FJ10024)

Accel – Perf Fuel Injector 21Lb Each (Part No.150121)

Accel – Perf Fuel Injector 24Lb Each (Part No.150124)