1990 BMW M3 Suspension Parts
More 1990 BMW M3 Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1990 BMW M3, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1990 BMW M3 Suspension Parts
Elring – Shock / Strut Paper Mount Gasket (Part No.L4017263905ELR)
from
$2.06
The Elring Shock / Strut Paper Mount Gasket is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets or exceeds OEM specifications
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457406BIL)
from
$206.48
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Bilstein – B8 Performance Plus – Strut Insert (Part No.L3005396861BIL)
from
$273.87
Finish: Yellow Paint Bilstein B8 Performance Plus shock absorbers and struts deliver absolute mastery of the road surface for the performance-minded driver. Designed to push a car’s suspension to its performance peak, these shocks are specifically suited for use with special lowering springs in combination with anti-sway bars or other suspension upgrades.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- High-performance shock absorbers and struts designed specifically for lowering springs and production sport vehicle
- Sport-tuned with a high level of comfort
- Precision handling and optimized vehicle control
- Road-tested and fine-tuned by BILSTEIN The increased performance and aggressive valving of the Bilstein B8 Sport shocks significantly increase the rigidity of the vehicle and is not recommended for drivers who wish retain ride quality.
Sachs – Strut Bump Stop Service Kit (Part No.L3045938638SAC)
from
$78.19
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.
Product Features:
See More
Product Features:
- SACHS Service Kits help to prolong the life and performance of the shock or strut.
- Always replace your Service kits in pairs.
- Are built with design and quality that matches or exceeds OE quality
MOOG – Suspension Strut Bellows (Part No.K90466)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Shock Mounting Kit (Part No.904966)
from
$25.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Shock Mounting Kit (Part No.L4049847885KYB)
from
$30.72
The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Shock Mount (Part No.L401051096LEM)
from
$21.33
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mounts and fasteners
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Corteco – Corteco Shock Mount (Part No.L401019622CFW)
from
$20.95
The Corteco Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Lemfoerder Shock Mount (Part No.L4010296747LEM)
from
$20.70
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mounts and fasteners
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
KYB – Strut mount (Part No.SM5259)
from
$77.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Corteco – Strut Mount (Part No.L303038516CFW)
from
$55.02
The Corteco strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Pivot for the steering mechanism, providing a smooth steering response
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
KYB – STRUT MOUNT (Part No.L3030151164KYB)
from
$108.95
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Lemfoerder – OE Replacement Suspension Wishbone (Part No.L2000146992LEM)
from
$483.71
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Lemfoerder – OE Replacement Suspension Wishbone (Part No.L2000146993LEM)
from
$488.14
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
MTC – Control Arm (Part No.L200077904MTC)
from
$306.25
The MTC control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Bilstein – B6 Performance (DampTronic) – Shock Absorber (Part No.L4000453980BIL)
from
$709.15
Finish: Yellow Paint Bilstein B6 Performance (DampTronic) gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance (DampTronic) shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.
Product Features:
See More
Product Features:
- Perfectly adapted to suit series-production electronic adjustment system
- Ability to switch rapidly from comfortable, everyday mode to sporty setting for journeys across rural roads and right up to a racing setting for club sport
- Marked improvement in safety and performance without additional spring changes (standard springs can be used)
- BILSTEIN gas pressure technology BILSTEIN mono-tube/Upside-Down technology, made in Germany
- Road and track tested by BILSTEIN for fi ne tuning
- No German TUV registration required
Bilstein – B6 Performance – Shock Absorber (Part No.L4000396327BIL)
from
$163.67
Bilstein B6 Performance gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- Improved safety and sportiness
- Added traction and enhanced stability
- Increased durability and performance while maintaining ride comfort
- Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.
Bilstein – B4 OE Replacement – Shock Absorber (Part No.L4000457384BIL)
from
$111.92
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5947)
from
$48.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Dorman – Suspension Control Arm Bushing (Part No.523-076)
from
$104.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Lemfoerder – Control Arm Bushing (Part No.L2030661834LEM)
from
$58.33
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Lemfoerder – Control Arm Bushing (Part No.L2030146997LEM)
from
$125.27
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Rein – Control Arm Bushing (Part No.AVB0633)
from
$62.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts perform like original.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007266124APA)
from
$10.60
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Lemfoerder Coil Spring Shim (Part No.L500777947LEM)
from
$5.27
The Lemfoerder Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Coil Spring Shim (Part No.L5007317759APA)
from
$18.26
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007266126APA)
from
$12.52
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Popular 1990 BMW M3 Suspension Parts Categories
1990 BMW M3 Suspension Parts
You count on your 1990 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 18 Suspension Parts ranging in price from $2.06 to $273.87, you’re sure to find everything you need for your 1990 BMW M3.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 9 different brands like Driveworks, Monroe, and Corteco. 1990 BMW M3 Suspension Parts start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 17 extensive product reviews on 1990 BMW M3 Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1990 BMW M3 below to get started!
Top-Rated Suspension Parts Brands For Your 1990 BMW M3
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 BMW M3 running right for years to come. In our inventory you’ll find brands like Driveworks, Monroe, Corteco, and even more.
Popular KYB Suspension Parts
You’ll find popular KYB brand products across Shocks and Struts. All are waiting to get your 1990 BMW M3 back on the road. Some of the top-rated KYB products in these categories are:
Top-Rated Suspension Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Suspension Parts for your 1990 BMW M3, and some of our most reviewed parts include:
FAQs for 1990 BMW M3 Suspension Parts
What are the most purchased Suspension Parts for the 1990 BMW M3?
Out of 18 Suspension Parts for the 1990 BMW M3, the most popular in our inventory are:
