1989 Pontiac Firebird Performance and Racing Products

Name: High Performance In-Tank Fuel Pump - 255 liter/hr. (67 gph)
Brand: Edelbrock
SKU: 17933
Price: 221.99 USD
Rating: 5.0 (3 reviews)

Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 1989 Firebird. Advance Auto Parts has popular Firebird parts like Performance Ignition Products, Performance Exhaust Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Firebird model years including 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1989 Pontiac Firebird Performance and Racing Products below and start saving instantly.

Popular 1989 Pontiac Firebird Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Computer Chip Programmers

Performance Fuel Pumps

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Computer Prom and Chips

Performance Shifters

Performance Distributors

Performance Transmission Dipstick Tubes

Performance Valve Covers

Performance Exhaust System Kits

Performance Throttle Bodies

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Differential Covers

Performance Front Shock and Struts

Performance Distributor Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Timing Covers and Tabs

Performance Exhaust Tail Pipes

Performance Valve Cover Hardware

Performance Upper Performance Control Arm Bushings

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Universal Joints

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Exhaust Pipes

Performance Torque Arm Bushings

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Track Bars and Bushings

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Brake Bleeders

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Cylinder Head Installation Kits

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Engine Cylinder Heads

Performance Nitrous Systems

Nitrous Oxide Injection System Kit

Performance Torque Converters

Performance Transmission Rebuild Kits

Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 1989 Pontiac Firebirds

from

$221.99

Product Features:

OE IN-Tank Upgrade Pumps
Ideal For Supporting Performance Improvements
Replace Original Pump Exactly
Include All Necessary Hardware
Easy Installation

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$414.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$168.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$64.19

Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.

Product Features:

Fits 1960-1986 Chevy 262-400 Small Block
OEM height, short-style covers
Chrome plated steel construction
Perimeter style bolt pattern
Features 1 breather/oil fill cap opening per valve cover
Sold as a pair

from

$216.99

Product Features:

GM 10BL 8.2 R/P 3.73 MGP

from

$60.29

Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:

Will Not Shrink/Deteriorate
Creates A Tight Leak Proof Seal
Helps Lower Under hood Temps
Seals Irregular Surfaces
Seals Slightly Damaged Surface
Ideal For Tow Vehicles
Ideal For Motor Homes

from

$48.49

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

from

$737.99

Leave it to MSD to build an all-out performance distributor to replace the OEM GM LT1 Optispark. We machine an entire billet block of aluminum down into a precise housing that fits in place of the factory piece. Then, we fill it with a reliable new pick-up assembly, a trick timing adjustment mechanism and top it off with an all new MSD distributor cap. The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly. Once installed, you have the ability to adjust the ignition timing. The only distributor that offers timing adjustability. An adjustment screw allows the timing to be tweaked up to 5 degrees. The distributor is equipped with a fresh air vent and has an extra thick mounting surface for the cap to eliminate leaks. The distributor is supplied complete with our heavy duty LT1 cap, rotor and the components required for installation.

Product Features:

Advanced optical encoder trigger design for accuracy/reliability.
Rotor drive design is positively indexed and cannot slip.
Large ball bearing stabilizes timing through 10;000 rpm.
Fresh air vented and sealed to keep the elements out.
Improved housing design and extra bolt eliminates leaks
Easily Adjust The Timing Up To +/-5 deg.

from

$1009.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
64cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$409.99

These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

Product Features:

Complete High Perf. Or Racing Trans. Overhaul
Includes Only OEM Valvebody Gaskets
Instructions Not Included

from

$23.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$87.19

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Shank O.D. .540″
Includes Locks and Hex Wrench
High-Quality Grade Steel
Heat-Treated For Ex Strength
Plated With Durable Gold Tone Finish

from

$86.99

Lakewood universal replacement U-joints are fatigue- and wear-resistant, the ultimate in strength. Designed with ultra-durable chrome-nickel-moly alloy cross and caps, and special high-carbon steel and induction heat-treated needle bearings.

Product Features:

Chrome-Nickel-Moly Alloy Cross
Improved Fatigue Resistance
High-Carbon Steel Bearings
Maximize Wear Resistance
Solid Forged Cross Body
High Strength

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$49.49

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

Stock GM HEI replacement distributor cap
Red

from

$24.99

Product Features:

Reduces Wheel Hop in Acceleration
Prevents Shudder under Braking
Adds Greater Handling Control

from

$7.69

CUP

from

$18.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$825.99

HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
Dual Pattern Drive Lugs
New Turbine Hub
New Springs/Rollers In Stator

from

$1114.99

Product Features:

Designed For Carbureted V8 Engines
Enhanced Flow Capacity
Add Power In Stages
Softens The Hit Of The Nitrous System

from

$55.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$152.99

Shift Improver Kits – Buick, Chevrolet, GMC, Olds, Pontiac – 1968 to 1981 TH-350 and M38 Application: 1968 to 1981 TH-350 and M38 (for TH-350C use Transpak # 30235) Recalibrate your automatic transmission for optimum performance and extended life! Provides crisp shifts on any stock automatic transmissions. Elimination of soft sluggish shifts, shift overlap, and excess wear on clutches and bands due to slippage. Improves transmission life. Transmission removal not required. The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are a few dollars and some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Just ask the thousands of satisfied customers that have installed one in their transmissions! Stage 1 – Heavy Duty Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. Stage 2 – Street/Strip Provides very positive shifts for high performance street use or for competitive events. This model is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$69.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$179.99

Flexplate GM Ls

Upgrade your 1989 Pontiac Firebird with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1989 Pontiac Firebird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Firebird functioning at its best. At Advance Auto Parts, we offer a wide selection of 147 Performance and Racing Products for the 1989 Pontiac Firebird, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1989 Pontiac Firebird at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $1,028.99, with an average price of $190.23. Our 147 Performance and Racing Products in stock come from 24 trusted brands, so you’re sure to find the right part for your 1989 Pontiac Firebird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Pontiac Firebird, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, MSD Ignition, Mr. Gasket, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. MSD Ignition and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $13.29, and at an average 4 stars rating. With 1,578 customer reviews and counting, our 1989 Pontiac Firebird Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Pontiac Firebird is always ready to roll. We’re committed to providing you with everything you need to keep your Firebird in top shape, all in one place. Start shopping confidently below for your 1989 Pontiac Firebird!

Best-Selling Performance Ignition Products for 1989 Pontiac Firebirds

Enhance the driving experience in your Pontiac with 6 quality Performance Ignition Product components, starting at $30.49.

show more show less

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$71.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$65.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil
Produce More Output Voltage
Smooth Idle

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$72.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

Most Popular 1989 Pontiac Firebird Performance Exhaust Products

Customize your Pontiac with 15 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust Pipes, all priced under $584.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$165.99

The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$151.99

DynoMax® VT mufflers offer a revolutionary, high-flow straight-through stainless steel performance muffler that controls irritating drone, while ensuring maximum performance. To provide Drone-Free Performance, DynoMax® Valve Technology mufflers feature an exclusive, precisely calibrated internal valve, that redirects exhaust flow during cruising conditions. Floor the gas, and the valve will automatically adjust for maximum exhaust flow, delivering on-demand performance and a deep, throaty drone-free sound.

Product Features:

Exclusive Dynomax® Valve Technology helps ensure Drone FREE performance
Micro-Finish Stainless Steel construction for lifelong protection
Slotted bushing ends
100-percent welded construction for lifelong durability
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

from

$42.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

Withstands Intense Exhaust Heat
Reusable header, exhaust manifold and collector flange gaskets
Manufactured from “dead soft” aluminum layers – .125″ thick
Easy Removal For Disassembly
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$160.99

from

$322.99

Give your Chevrolet Camaro or Pontiac Firebird’s exhaust system an upgrade with a DynoMax Super Turbo dual 2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.

Product Features:

COMPATIBILITY — Designed for 1983-1992 Chevrolet Camaro and Pontiac Firebird; see product information for compatibility and engine specs
COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipes, hanger, and clamps
EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
IMPROVED FLOW CAPACITY — 2.5-in. Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 385 SCFM
PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
ENGINEERED TO LAST¿– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
ENGINEERED TO LAST┐– Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
SPECS — 2.5-in. Straight cut tail pipes

from

$84.99

Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Dyno proven to flow up to 700 SCFM
Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
1.75-inch to 3-inch inlet / outlet configurations

from

$42.99

Withstands Intense Exhaust Heat
Reusable header, exhaust manifold and collector flange gaskets
Resists Deteriorating
Manufactured from “dead soft” aluminum layers – .125″ thick
Easy Removal For Disassembly
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$87.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$83.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$584.99

Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:

Exit At Stock Locations
Mandrel Bent Not Press Bent
Mandrel Bent Not Press Bent
Maximum Flow
Uses Existing Stock Hangers
Large Diameter 16 Ga. Aluminum Tubing
Low Back Pressure and Long Life
Easy Installation

from

$556.99

Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:

Exit At Stock Locations
Mandrel Bent Not Press Bent
Mandrel Bent Not Press Bent
Maximum Flow
Uses Existing Stock Hangers
Large Diameter 16 Ga. Aluminum Tubing
Low Back Pressure and Long Life
Easy Installation

from

$397.99

All Dynomax Performance Exhaust Systems bolt on for easier installation. Customize your vehicle’s complete exhaust quickly with an emissions-legal premium performance system from Dynomax.

from

$209.99

DynoMax Performance Exhaust is a leading performance exhaust brand built on over 25 years of market leadership. Each and every DynoMax product is backed by engineers who know what you want and expect out of a performance exhaust product… and who exceed your expectations every time.

from

$57.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

Top Picks for 1989 Pontiac Firebird Performance Fuel Systems

Upgrade Pontiac Firebirds with top-quality Performance Fuel Systems parts, including 2 OEM and aftermarket selections for your 1989 model.

show more show less

from

$221.99

Product Features:

OE IN-Tank Upgrade Pumps
Ideal For Supporting Performance Improvements
Replace Original Pump Exactly
Include All Necessary Hardware
Easy Installation

from

$330.99

The Holley line of high output in-tank electric fuel pumps is available in flow ratings of 190 and 255 liters of fuel per hour. A 155 liter per hour Mustang pump is available along with 255 liter per hour rated pumps for “forced induction” applications. These particular pumps flow significantly more fuel at high pressure. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At the same 80 PSI the equivalent forced induction pump will flow over 210 liters (50 gallons) per hour. Holley in-tank electric pumps utilize a proven geroter design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. Coverage includes most popular Ford, General Motors, Chrysler and import applications. These are complete fuel pump kits and include all accessories and installation instructions. Also includes is an inlet filter that meets or exceeds original equipment specifications and provides improved filtration and durability.

Product Features:

255 lph Feeds Up To 750 Hp At 60 PSI
Proven Gerotor Design
Compact Enough To Fit In Existing Hanger Assemblies
Complete Kit w/Drop Parts Accessories/Instructions
Inlet Filter For Improved Filtration/Durability

In-Demand Performance Oil Filters for 1989 Pontiac Firebirds

Select from 1 premium Performance Oil Filters parts for your 1989 Pontiac Firebird.

show more show less

from

$17.99

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Most Sold 1989 Pontiac Firebird Performance Engines

Explore our best-selling Pontiac parts for the 1989 Firebird among 47 OEM and aftermarket options starting from $14.99.

show more show less

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$329.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes

from

$151.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$23.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$306.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$215.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$215.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$111.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$65.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$38.49

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick. They fit both 1987-2002 Gen I Chevrolet Small Blocks as well as 1992-1997 Gen II LT-Based Small Blocks.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
Not intended for use in emission controlled vehicles.

from

$14.99

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$68.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$64.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 3.870 inch, Compressed thickness 0.028 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$42.49

Manufactured from cellulose/nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile rubber composition gasket material
Provides excellent sealing and durability
Complete with molded rubber front/rear oil pan end seals where applicable
For OE replacement, high performance street, drag race and oval track use
Graphite Non-Wicking Rubber
No Cork Particles
Easy Removal For Disassembly

from

$37.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$367.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched To Performer Intake PN[5486]
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$126.99

Talk about a smooth operator, this Holley airfoil kit easily adapts to the stock GM throttle body on Chevrolet 5.7L TPI and LT1 engines used on Camaros and Firebirds. It acts to smooth out and minimize the turbulence of the incoming flow of air into the throttle body. The September, 2002 edition of GM high-tech performance magazine reported a 5.8 horsepower increase after installing this Holley airfoil kit on a stock 1994 Camaro Z28 LT1. Installation is easy; simply snap it into place in the mouth of the throttle body and it’s ready to work. Made from space age elastomer, the Holley airfoil will perform effectively and unobtrusively for years.

Product Features:

Smoothes and Minimizes Turbulence
Increased Airflow
Creates More Horsepower
Easy Installation
Made From Space Age Elastomer
Effective And Unobtrusive
Long Lasting

from

$94.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$65.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$17.99

Replacement gasket for top to bottom. See PN(7110) complete. PN(7067) bottom. PN(7032) top. Includes base and top for intake manifold PN(7110).

Product Features:

Replacement Gasket for Top to Bottom
See PN[7110]Complete; PN[7067]Bottom; PN[7032] Top

from

$87.19

(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Shank O.D. .540″
Includes Locks and Hex Wrench
High-Quality Grade Steel
Heat-Treated For Ex Strength
Plated With Durable Gold Tone Finish

from

$24.99

Product Features:

Replacement Gasket For PN[7070] Edelbrock Intake
One Gasket Only

from

$1028.99

Product Features:

Designed for 1987-95 Throttle Body Injection or Tuned Port Injection 5.7L Small-Block Chevy engines originally equipped with center bolt valve covers
Flat Tappet Camshaft Type
60cc chambers with 165cc intake ports
Size of intake valve is 2.02 in. and exhaust valve is 1.60 in.
Sold as one complete head

from

$789.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$704.99

Product Features:

Great For Street Machines/Street Rods/Muscle Cars
Two Piece Design
Individual D-Shaped Runners
Optimized For Broad Power Range/Large Plenum Area
Can Be Used For Blow-Through Superchargers
Fully CNC Machined For A Perfect Fit
No Exhaust Crossover

from

$631.99

For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:

For 3500 to 7500 RPM
Use Where Low-End Torque is Not a Prime Factor
Great For Engines w/Slightly Modified Heads
Top Has Vacuum Outlet for Power Brakes
Will Accept Forward and Sideways Mounted Carbs
Carburetor Center-to-Center Dimensions 8.875 in
HEI Ignition Will Not Clear Manifold
For Street Mach.; Street Rods; Pro-Street; Marine

from

$609.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$576.99

Product Features:

6500-10000 RPM Range
Dual Plane Quad Type – 4150 Style Flange
7.13 in. Front Height, 7.13 in. Center Height, 7.13 in. Rear Height
Satin Finish
Base Only

from

$544.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$494.99

Product Features:

3500-8000 RPM Range
Single Plane Type-4500 Style Flange
6.77 in. Front Height, 6.77 in. Center Height, 6.77 in. Rear Height
Satin Finish
For Raised Port 23 Degree Heads

from

$463.99

Edelbrock part #2999 Victor Jr. 23 degree Tall intake manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. This versatile manifold is excellent for many applications from high-performance’s stree

Product Features:

Race Winning Design for all Types of Competition
Single Plane Maximizes Torque and Horsepower
For Performance in 3500 to 7500 RPM Range
Exit Ports Closely Match Unported GM Bowtie Heads
Ports Match GM PN[14011058/14011034/10134392]
Best for Classes Restricting Porting of Intakes
Features 1 in. Taller Carb Pad than PN[2972]

from

$404.99

Race winning design for all types of competition. Single plane maximizes torque and horsepower. Runners feature extra material for custom porting. For performance in 3500 to 7500 RPM range. Low profile design helps minimal hood clearance. Can use 1 or 2 inch spacers to tune performance. Use PN(2999) where 1 inch spacers are not allowed. Best for standard port heads.

Product Features:

Race Winning Design for all Types of Competition
Single Plane Maximizes Torque and Horsepower
Runners Feature Extra Material for Custom Porting
For Performance in 3500 to 7500 RPM Range
Low Profile Design Helps Minimal Hood Clearance
Can Use 1 Or 2 in. Spacers To Tune Performance
Use PN[2999] Where 1 in. Spacers Not Allowed
Best for Standard Port Heads

from

$381.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used
Accepts Late-Model Choke; Waterneck; and HEI
Accepts A/C And Alternator
Accepts Exhaust Heated Chokes and Accepts EGR

from

$371.99

Product Features:

High Rise/Dual Plane Design For Maximum Torque
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability
Permanent Mold Casting Process
Lighter/Smoother/Better Looking
More Consistent Castings

from

$259.99

Product Features:

2000-6500 RPM Power Band
Single Plane/Open Plenum Design
No Provision For Divorced Or Hot Air Choke
Square Flange Carburetor Mounting

from

$203.99

Edelbrock part #9646 Pushrods are designed for small-block Chevy V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise forme

Product Features:

7.25 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$147.99

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Dyno Tested And Street Proven
Great Match to Edelbrock Camshaft Kit

from

$141.99

Intake manifold base only. Match with top. For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. Top has vacuum outlet for power brakes. Carburetor center-to-center dimensions 8.875 inch. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:

Top Only-See PN[7119] for Complete-Bottom PN[7067]
Use Where Low-End Torque is Not a Prime Factor
Great For Engines w/Slightly Modified Heads
Top Has Vacuum Outlet for Power Brakes
Will Accept Forward and Sideways Mounted Carbs
Carburetor Center-to-Center Dimensions 8.875 in
HEI Ignition Will Not Clear Manifold
For Street Mach.; Street Rods; Pro-Street; Marine

from

$68.99

High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:

Steel core provides rigidity, durability and prevents gasket push out
Molded rubber coating seals minor irregularities in pan surface
One piece design is easier to install and even less prone to leak
Direct replacement suitable for all uses – street, racing, heavy duty
Include both gasket and new oil pan bolts

from

$64.19

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$24.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1989 Pontiac Firebird

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1989 Pontiac Firebirds. Below you’ll find some of our best rated Performance and Racing Products from K&N, MSD Ignition, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1989 Firebird start at just $13.29 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1989 Pontiac Firebird Performance and Racing Products

When it comes to maintaining or upgrading your 1989 Pontiac Firebird, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1989 Pontiac Firebird. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 35 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$17.99

(35)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Good”

Popular MSD Ignition 1989 Pontiac Firebird Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1989 Pontiac Firebird owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1989 Firebird, Advance Auto Parts carries a full inventory of 7 MSD Ignition Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $13.29 to $72.99, plus, with more than 66 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$72.99

This product is not rated

Mod HEI Dust Cover, V8 & Odd Fire V6

“”

from
$13.29

This product is not rated

Rotor; GM HEI

“”

from
$49.49

(1)

Distributor Cap; GM HEI; Red

“This Distibutor Cap kit came with the Rotor and replacement bushings. Both the high resistance one and the low resistance one. The factory HEI coil bo”

FAQs for 1989 Pontiac Firebird Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1989 Pontiac Firebirds?

Out of 147 Performance and Racing Products that fit 1989 Pontiac Firebirds, the following parts are the top sellers:

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120010) – $17.99
High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
High Performance Sway Bar End Link Kit with Hardware (16360004) – $26.99

What’s the price range for 1989 Pontiac Firebird Performance and Racing Products?

Performance and Racing Product prices for the 1989 Pontiac Firebird start at $7.69 and go up to $1,028.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1989 Pontiac Firebird?

The average price for Performance and Racing Products for the 1989 Pontiac Firebird is $190.23. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Firebird model years?

Yes, we currently carry Performance and Racing Products for 35 model years of Pontiac Firebirds between 1967 and 2002. Performance and Racing Products are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

What are the cheapest Performance and Racing Products for my 1989 Pontiac Firebird?

The cheapest 1989 Pontiac Firebird Performance and Racing Products we carry in stock are:

CUP (50206003) – $7.69
Tie Rod Dust Boot (17360821) – $9.99
D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $10.99
Ultra Seal; Timing Cover Bolts (17360380) – $13.29
Rotor; GM HEI (17350190) – $13.29

What are the top-rated Performance and Racing Products that fit the 1989 Pontiac Firebird?

Out of 1,578 reviews by customers, our 1989 Pontiac Firebird Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1989 Pontiac Firebird and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120010) – $17.99

What types of Performance and Racing Products do you sell for my 1989 Pontiac Firebird?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1989 Pontiac Firebird:

Can I get help with 1989 Pontiac Firebird Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac Firebird Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac Firebird Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 Pontiac Firebird Performance and Racing Products

Edelbrock – High Performance In-Tank Fuel Pump – 255 liter/hr. (67 gph) (Part No.17933)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

Energy Suspension – Hyper-Flex System (Part No.3.18116G)

Hypertech – ThermoMaster Power Chip (Part No.11002)

Mr. Gasket – Valve Cover (Part No.9800)

Motive Gear – Performance Differential Ring and Pinion (Part No.G882373)

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7151)

Accel – Distributor Cap And Rotor Kit (Part No.8124)

MSD Ignition – Distributor; GM LT-1 5.7L; 95-97 (Part No.83811)

Edelbrock – Performer Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet (Part No.60909)

B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

Energy Suspension – Track Arm Bushing Set (Part No.3.7106G)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Lakewood – High Performance U-Joint (Part No.23018)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Energy Suspension – Performance Torque Arm Mount Bushing (Part No.3.1111G)

FAG US – CUP (Part No.LM48510)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5130R)

B & M – Holeshot 3600 (Part No.20425)

Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (100-400+ Hp) (Part No.70082)

Energy Suspension – Control Arm Bushing Set (Part No.3.3167R)

B & M – Transpak (Part No.30235)

Energy Suspension – Control Arm Bushing Set (Part No.3.3136G)

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Hays – Flexplate GM Ls (Part No.10-030)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Flowmaster Inc. – 80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.43083)

Dynomax – VT Universal Muffler (Part No.17138)

Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42583)

Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17493)

Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 19" L, 2.5" In, 2.5" Out, Oval (Part No.17739)

Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

Dynomax – Exhaust Intermediate Pipe (Part No.52497)

Dynomax – Exhaust Intermediate Pipe (Part No.54773)

Hooker Headers – Super Competition Cat-Back System (Part No.16823HKR)

Hooker Headers – Super Competition Cat-Back System (Part No.16820HKR)

Dynomax – Exhaust Systems (Part No.17391)

Dynomax – Super Turbo Dual System (Part No.17484)

Dynomax – Exhaust Tail Pipe (Part No.43244)

Edelbrock – High Performance In-Tank Fuel Pump – 255 liter/hr. (67 gph) (Part No.17933)

Holley – Electric Fuel Pump; In-Tank Electric Fuel Pump (Part No.12-914)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Weiand – Action Plus Water Pumps (Part No.9240P)

Weiand – Action Plus Water Pumps (Part No.9208P)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5867)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5780G)

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.5885)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

Holley – Avenger; Airfoil Kit (Part No.120-140)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Edelbrock – Intake Manifold replacement base to top gasket (Part No.6999)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)