1989 Nissan Pathfinder Clutch Systems
More 1989 Nissan Pathfinder Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1989 Nissan Pathfinder, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1989 Nissan Pathfinder Clutch Systems
Sachs – Sachs Flywheel (Part No.I1000326945SAC)
from
$129.28
Sachs Flywheels are made from high quality steel forging and are designed to meet or exceed the manufacturers specifications for quality and performance.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
Carquest Premium – New Flywheel (Part No.50-326)
from
$99.99
Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn’t always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
Product Features:
See More
Product Features:
- Casting process closely monitored to ensure uniform density and balance retention
- Eliminates chance of chatter due to hot spots not always removed by resurfacing
- New ring gear ensures positive starter engagement
- Engineered to properly fit the intended application with no modifications
Carquest Premium – TECHnovation Clutch Master Cylinder (Part No.39605)
from
$33.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
LuK – Clutch Master Cylinder (Part No.LMC254)
from
$36.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Dorman – Clutch Pilot Bushing .629 In. x .816 In. Type A, Length .689 In. (sold by each) (Part No.690-004)
from
$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Clutch Release Bearing (Part No.S-PB-22)
ATP – FLYWHEEL SHIM (Part No.NS-2)
from
$18.99
FLYWHEEL SHIM
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38117)
from
$21.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Clutch Hydraulic Hose (Part No.H381137)
from
$23.49
Engineered from high-quality materials to ensure chemical and thermal resistance, Tru-Torque’s Clutch Hydraulic Hose restores and maintains optimal clutch performance. New hose replacement is recommended as part of a complete clutch repair for your vehicle.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Integral brackets included for ease of installation (where applicable)
- Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
- All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-901)
from
$254.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Carquest Premium – New Clutch Set (Part No.MU47695-1)
from
$223.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
Carquest Premium – New Clutch Set (Part No.MU72106-1)
from
$216.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
National – Bearings (Part No.202-SS)
from
$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Koyo – Clutch Release Bearing (Part No.I202036451KOY)
from
$16.19
Koyo designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Integrated functionality
- Design for high temperature, and high rotating speed
Koyo – Release Bearing (Part No.I20202303036KOY)
from
$52.43
Release Bearing
Koyo – Clutch Release Bearing (Part No.I202035300KOY)
from
$36.19
Koyo designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Integrated functionality
- Design for high temperature, and high rotating speed
National – Multi Purpose Bearing (Part No.613015)
from
$64.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
LuK – Clutch Slave Cylinder (Part No.LSC200)
from
$21.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Carquest Premium – TECHnovation Clutch Slave Cylinder (Part No.37681)
from
$16.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
LuK – Clutch Slave Cylinder (Part No.LSC346)
from
$209.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Carquest Premium – TECHnovation Clutch Slave Cylinder (Part No.37627)
from
$17.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
Carquest Premium – Clutch Slave Cylinder (Part No.900140)
from
$67.99
New clutch hydraulics are designed and engineered to meet Original Equipment Manufacturer Specifications and Performance.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
ATP – CLUTCH FORK (Part No.ZA-111)
from
$39.99
CLUTCH FORK
Popular 1989 Nissan Pathfinder Clutch Systems Categories
1989 Nissan Pathfinder Clutch Systems
You count on your 1989 Nissan Pathfinder to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 19 Clutch Systems ranging in price from $2.99 to $244.99, you’re sure to find everything you need for your 1989 Nissan Pathfinder.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 9 different brands like Carquest Premium, DriveWorks, and LuK. 1989 Nissan Pathfinder Clutch Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 19 extensive product reviews on 1989 Nissan Pathfinder Clutch Systems. Some of the top-rated Clutch Systems products we carry are Brake Hose Assembly: Copper Washers Included with 4.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1989 Nissan Pathfinder below to get started!
Top-Rated Clutch Systems Brands For Your 1989 Nissan Pathfinder
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Nissan Pathfinder running right for years to come. In our inventory you’ll find brands like Carquest Premium, DriveWorks, LuK, and even more.
Popular Carquest Premium Clutch Systems
You’ll find popular Carquest Premium brand products across Flywheels and Clutch Slave Cylinders. All are waiting to get your 1989 Nissan Pathfinder back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1989 Nissan Pathfinder Clutch Systems
What are the most purchased Clutch Systems for the 1989 Nissan Pathfinder?
Out of 19 Clutch Systems for the 1989 Nissan Pathfinder, the most popular in our inventory are:
What are the top-rated 1989 Nissan Pathfinder Clutch Systems?
Top-rated Clutch Systems for your 1989 Nissan Pathfinder based on customer reviews/ratings are:
