1989 Mercury Tracer Heater Hoses

Enhance and Protect Your 1989 Mercury Tracer with Quality Heater Hoses

Maintaining the performance of your 1989 Mercury Tracer starts with choosing the right parts, and a high-quality Heater Hose helps ensure a reliable and efficient vehicle. At Advance Auto Parts, we offer Heater Hoses specifically for the 1989 Mercury Tracer, ensuring a perfect fit and lasting durability. Choosing to shop with Advance Auto Parts means you’re making a smart decision to prioritize both quality and reliability for your vehicle.

Affordable and Reliable Heater Hoses for Every Budget

Finding a Heater Hose that combines quality with affordability is easy at Advance Auto Parts. With prices starting as low as $12.49 and an average price of $19.64, you can choose one that fits your budget while delivering the quality you expect. Our Heater Hoses are competitively priced, ranging from $12.49 to $30.49, so you get value without compromising on strength or reliability.

Trusted Brands and Top-Rated Options

With 4 Heater Hoses from 2 trusted brands in stock, Advance Auto Parts has you covered. Our Heater Hoses for the 1989 Mercury Tracer have earned reviews from over 3 customers, with an average 4 stars rating across the board. Popular options include Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length, Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length, and Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter, starting at $12.49. Our selection includes highly regarded brands such as Dayco and Gates, and more, offering you top-notch reliability. For example, we have 2 Dayco Heater Hoses starting at $12.49 with an average rating of 5 stars, 2 Gates options from $18.79 with a 4 stars rating.

Heater Hoses for Your 1989 Mercury Tracer

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length (Part No.87621)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length

from

$16.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.87620)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$12.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter (Part No.20776)

Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter

from

$30.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18705)

Premium Molded Heater Hose

from

$18.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

FAQs for 1989 Mercury Tracer Heater Hoses

Which Heater Hoses are the top sellers for the 1989 Mercury Tracer?

Out of 4 Heater Hoses that fit 1989 Mercury Tracers, the following parts are the top sellers:
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length
from $12.49
This product is not rated
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length
Heater Hoses
Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter
from $30.49
This product is not rated
Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter
Heater Hoses

How can I make sure that a part will be compatible with my 1989 Mercury Tracer?

Our Mercury Tracer aftermarket and OEM parts are designed specifically for the 1989 model. You can always find your specific fitment and compatibility for your 1989 Mercury on an individual product page.

What is the price range for 1989 Mercury Tracer Heater Hoses?

The range of prices of Heater Hoses for the 1989 Mercury Tracer goes from $12.49 up to $30.49 for the most premium parts.

What is the average price of a 1989 Mercury Tracer Heater Hose?

1989 Mercury Tracer Heater Hoses average $19.64 for our selection of OEM and aftermarket parts. Keep in mind the variety of brands we offer, such as Dayco Gates, and more, so you are likely to find a wide range of prices across a variety of brands and products.

Does Advance Auto Parts sell Heater Hoses for other Mercury Tracer model years?

Yes, we currently stock Heater Hoses for 10 model years of Mercury Tracers, from 1988 to 1999. Model years 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991 are the most popular for Heater Hose purchases.

Can I get help with 1989 Mercury Tracer Heater Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Heater Hoses and more.

What is your return policy for Mercury Tracer Heater Hoses?

Advance Auto Parts keeps returns simple. For new Mercury Tracer Heater Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.