1989 Mercedes-Benz 300CE Cooling and Climate Controls

Essential 1989 Mercedes-Benz 300CE Cooling and Climate Controls

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

A/C ACC Temp Sensor

from

$32.68
A/C ACC Temp Sensor

Santech – A/C Pressure Switch (Part No.R1054178181SII)

A/C Pressure Switch

from

$18.63
A/C Pressure Switch

Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)

Oil Drain Plug Gaske

from

$0.62
Oil Drain Plug Gaske

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13496)

Standard Thermostat: 160 Degrees

from

$21.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUE1481)

HVAC Blower Motor Resistor

from

$809.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Bosch – Water Temperature Sensors (Part No.C602012903BOS)

Water Temperature Sensors

from

$76.28
Bosch liquid temperature sensors accurately monitor the vital fluids in your vehicle ensuring long and healthy life. The sensor provides information to the Engine control Unit to keep your engine running strong, safe, and efficient.

Product Features:
  • High durability against operating materials: fuel, oil, water
  • Sturdy, vibration-proof design with lasting performance
  • Extreme Accuracy under extreme conditions: -40F – +260F
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-943)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$43.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Auxiliary Coolant Pump (Part No.902-088)

Auxiliary Coolant Pump

from

$292.99
This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
  • Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – New Nippondenso 10P Clutch Assembly w/ Coil (Part No.47599)

New Nippondenso 10P Clutch Assembly w/ Coil

from

$242.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Bilstein Engine Cooling Fan Blade

from

$68.02
The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Electrical Harness - 2-Wire GM A/C Clutch with Diode

from

$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Rein – A/C Receiver Drier (Part No.ACD0186R)

A/C Receiver Drier

from

$37.99
Rein OE Quality Receiver Drier. If the OES manufacturer fits a high pressure safety valve and or sight glass, the equivalent Rein Automotive Receiver Drier will also be fitted with one. All Rein Automotive Receiver Driers are pressure tested after manufacturing to ensure high quality.
See More

Carquest Premium – New Compressor with Clutch, Nippondenso 10PA15C (Part No.T58334)

New Compressor with Clutch, Nippondenso 10PA15C

from

$439.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:
  • Every unit is 100% function and leak tested
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Very low friction coating used on swash plate to improve durability
  • PTFE coated pistons improve performance and reduce wear
  • Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
  • Matched high-quality needle-roller bearing ensures low friction and high load capability
  • Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Temperature Sender With Gauge

from

$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)

Air Conditioning Manifold Seal Kit

from

$5.41
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Behr – A/C Temp. Switch (Part No.R105529376BEH)

A/C Temp. Switch

from

$40.85
A/C Temp. Switch

Carquest Premium – AC Pressure Switch (Part No.ACC1605)

AC Pressure Switch

from

$92.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76975)

Blower Motor: With Wheel

from

$156.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Behr – A/C Pressure Switch (Part No.R1054178181BEH)

A/C Pressure Switch

from

$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More

Febi – Bilstein Thermostat Housing Cover / Water Outlet (Part No.G401139361FEB)

Bilstein Thermostat Housing Cover / Water Outlet

from

$29.10
The Febi/Bilstein Thermostat Housing Cover is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE style construction
  • Quality machined thread ports
  • Corrosion and rust inhibitor coated
  • Meets or Exceeds OEM Specifications
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432280)

Radiator: With Transmission Oil Cooler

from

$172.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

KAI – Radiator (Part No.RAD453)

Radiator

from

$121.99
New Platinum Pro Radiator, 2.6/2.8/3.0/3.2 Liter Engines

Product Features:
  • 2.6/2.8/3.0/3.2 Liter Engines, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1989 Mercedes-Benz 300CE Cooling and Climate Controls

You count on your 1989 Mercedes-Benz 300CE to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 80 Cooling and Climate Controls ranging in price from $0.62 to $809.99, you’re sure to find everything you need for your 1989 Mercedes-Benz 300CE.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 25 different brands like Permatex, Carquest Premium, and Factory Air. 1989 Mercedes-Benz 300CE Cooling and Climate Controls start as low as $0.62!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 483 extensive product reviews on 1989 Mercedes-Benz 300CE Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Cap & Valve A/C System Seal Kit with 4.2 stars and Radiator Cap: 20 PSI with 5.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1989 Mercedes-Benz 300CE below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1989 Mercedes-Benz 300CE

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Mercedes-Benz 300CE running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1989 Mercedes-Benz 300CE back on the road. Some of the top-rated Permatex products in these categories are:
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1989 Mercedes-Benz 300CE, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 1989 Mercedes-Benz 300CE Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1989 Mercedes-Benz 300CE?

Out of 80 Cooling and Climate Controls for the 1989 Mercedes-Benz 300CE, the most popular in our inventory are:
Radiator Cap: 20 PSI
from $8.79
(16)
Radiator Cap: 20 PSI
Radiator Caps
Standard Thermostat: 192 Degrees
from $25.99
(49)
Standard Thermostat: 192 Degrees
Thermostats
Standard Thermostat: 180 Degrees
from $24.99
(8)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 1989 Mercedes-Benz 300CE Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1989 Mercedes-Benz 300CE based on customer reviews/ratings are:
Cap & Valve A/C System Seal Kit
from $16.99
(6)
Cap & Valve A/C System Seal Kit
“Good product and price.”
Radiator Cap: 20 PSI
from $9.49
(3)
Radiator Cap: 20 PSI
“Great”
Engine Water Pump: New, Gasket/Seals Included
from $106.99
(3)
Engine Water Pump: New, Gasket/Seals Included
“Works well and was a good price. Although it took 6 hours to install. Be handy and have 1/4″ and 3/8″ swivels and extensions and 13mms sockets and a m”