1989 Jeep Wagoneer Differentials

Essential 1989 Jeep Wagoneer Differentials

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)

Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size

from

$266.99
Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)

Axle Housing Cover Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.32043)

Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up

from

$414.99
Yukon Performance spool for Dana 60 with 35 spline axles. fits 4.56 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Differential Crush Sleeve

from

$2.49


Product Features:
  • CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000
See More

USA Standard Gear – Pinion Installation Kit For Dana 60 Rear (Part No.60017)

Pinion Installation Kit For Dana 60 Rear

from

$225.99
Product Features:
  • Fits Dana Spicer 60 rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Powertrax – Lock Right Locker (Part No.2210-LR)

Lock Right Locker

from

$350.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

    Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

    from

    $3.99
    Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

    Product Features:
    • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
    See More

    Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

    Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

    from

    $83.99
    Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

    Product Features:
    • Axle Redi-sleeve
    • Fits Dana Spicer 44
    See More

    Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

    Dana 60 & Dana 70 Power Lok Case Bolt

    from

    $7.99
    Dana 60 & Dana 70 Power Lok case bolt.

    Product Features:
    • Power Lok case bolt for Dana Spicer 60 and 70
    • 7/16 x 14 thread
    • 3.5″ long
    • 9/16″ hex head
    See More

    Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)

    Dura Grip For Dana 44, 30 Spline, 3.92 & Up

    from

    $809.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

    Product Features:
    • Fits Dana Spicer 44 with 30 spline axles
    • 3.92 ratio and up only
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)

    O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing

    from

    $13.99
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 30 and AMC Model 35
    See More

    National – Shaft Repair Sleeve (Part No.99155)

    Shaft Repair Sleeve

    from

    $38.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

    Side Gear Thrust Washer For Dana 60, 70 & 80

    from

    $4.99
    Product Features:
    • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
    • Fits standard open differentials only
    See More

    Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

    Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

    from

    $832.99
    Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Clutch kit
    • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
    • Smooth design
    • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.27 Ratio (Part No.24263)

    High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.27 Ratio

    from

    $379.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

    Product Features:
    • Fits standard rotation Dana Spicer 30 without crush sleeve
    • 7.20″ ring gear diameter
    • 26 spline pinion
    • 10 ring gear bolts
    • 4.27 ratio
    See More

    Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

    Aluminum Girdle Replacement Cover For Dana 44 Ta HD

    from

    $359.99
    Aluminum Girdle replacement cover for Dana 44 TA HD.

    Product Features:
    • Fits standard rotation Dana Spicer 44
    • Aluminum girdle cover
    See More

    USA Standard Gear – 4340 Chrome Moly Replacement Axle For Dana 44, Scout & Wagoneer D44, Rh Inner, Uses 5-760X U/Joint (Part No.35071)

    4340 Chrome Moly Replacement Axle For Dana 44, Scout & Wagoneer D44, Rh Inner, Uses 5-760X U/Joint

    from

    $229.99
    4340 Chrome Moly replacement axle for Dana 44, Scout & Wagoneer D44, RH Inner, uses 5-760X u/joint. 14.78″ long, 30 spline.

    Product Features:
    • 30 spline
    • 14.78″ long
    • Fits Dana Spicer 44 in1974-1979 Wagoneer and 1971-1980 Scout
    • Right hand inner
    • 5-760X U-joint size
    • 4340 Chromoly
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 13889)

    Differential Cover Gasket

    from

    $11.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline (Part No.28004)

    Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline

    from

    $1204.99
    The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

    Product Features:
    • Fits Dana Spicer 60 with 30 spline axles
    • 4.56 and up ratio only
    • Patented internal design reduces common locker failures
    • 8620 internals for added strength
    • Assembled in the USA
    See More

    Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

    Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

    from

    $13.99
    Product Features:
    • Cover gasket
    • Fits Dana Spicer 60, 70, 70U and 70HD
    See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R30RMKT)

    Differential Master Bearing Kit - Timken

    from

    $151.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • DANA-30 JEEP MASTER KIT 66-90
    See More

    Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)

    Powr Lok Flat Driven Plate For Dana 44

    from

    $31.99
    Product Features:
    • Driven plate
    • Fits Dana Spicer 44 Powr Lok
    See More

    Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)

    Replacement Cross Pin Shaft For Standard Open Dana 30

    from

    $12.99
    Product Features:
    • Cross pin shaft for Dana Spicer 30
    • Fits standard open differentials only
    See More

    1989 Jeep Wagoneer Differentials

    Maybe you’re in the middle of a full rebuild of that 1989 Jeep Wagoneer. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 235 different Differentials in our inventory ranging from $1.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1989 Jeep Wagoneer running smoothly.

    Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Jeep Wagoneer. Yukon Gear, FELPRO, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1989 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 65 reviews in this category, some of the top rated parts include Differential Plug, Rubber with 4.8 stars and Oil Seal with 4.3 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1989 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1989 Jeep Wagoneer Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Crown Auto Jeep Replacmnt Differentials

    We carry Crown Auto Jeep Replacmnt parts in our stock across Differential Rebuild Kits categories, plus more. For a 1989 Jeep Wagoneer, our most popular Crown Auto Jeep Replacmnt Differentials include:

    Top 1989 Jeep Wagoneer Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1989 Jeep Wagoneer. Popular Felpro parts include:
    DIFFERENTIAL GASKET
    from $6.79
    (12)
    DIFFERENTIAL GASKET
    Rear Differential Cover Gaskets
    Axle Housing Cover Gasket
    from $6.49
    (10)
    Axle Housing Cover Gasket
    Rear Housing Cover Gaskets
    Axle Housing Cover Gasket
    from $6.79
    (9)
    Axle Housing Cover Gasket
    Front Housing Cover Gaskets

    FAQs for 1989 Jeep Wagoneer Differentials

    What are the most purchased Differentials for the 1989 Jeep Wagoneer?

    Out of 235 Differentials for the 1989 Jeep Wagoneer, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size
    from $8.99
    This product is not rated
    Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size
    Differential Cover Plugs
    Multi Purpose Seal
    from $23.29
    (4)
    Multi Purpose Seal
    Differential Pinion Seals

    What are the top-rated 1989 Jeep Wagoneer Differentials?

    Top-rated Differentials for your 1989 Jeep Wagoneer based on customer reviews/ratings are:
    Differential Plug, Rubber
    from $5.99
    (11)
    Differential Plug, Rubber
    “I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”
    Oil Seal
    from $10.49
    (3)
    Oil Seal
    “Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    “As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”