1989 Honda Civic Cooling and Climate Controls

Below you will find various in-demand Honda Cooling and Climate Controls, components and accessories for your 1989 Civic. Advance Auto Parts has popular Civic parts like Heating Parts, Engine Cooling Parts, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Civic model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1989 Honda Civic Cooling and Climate Controls below and start saving instantly.

Popular 1989 Honda Civic Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Engine Coolant Thermostat Housing Caps

Radiator Caps

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Water Outlets

Blower Motor Resistors

AC Condensers

AC Compressor Bypass Pulleys

Accumulator and Receiver Driers

AC Clutch Bearings

Thermostat and Water Outlet Gaskets

AC Discharge Lines

AC Suction Lines

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Switch Connectors

Thermostat Housing O-Rings

Radiator Fan Switches

Blower Switches

AC Compressor Relay Connectors

Radiator Cap Adapters

AC Compressor Seals

HVAC Control Panel Relays

Essential Cooling and Climate Controls for 1989 Honda Civics

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$65.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$16.56

The Febi Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$61.36

The Four Seasons A/C Expansion Valve is an OE-equivalent direct fit replacement that meets or exceeds the OEM design.

Product Features:

OE-Equivalent and Direct fit Application.
The thermostatic valves are of copper and brass design.
The expansion block is made of aluminum design.
They are built application specific per OEM shape and color.
The tube to cap is double soldered to insure integrity.
Internal or externally equalized based upon OEM design
The power valve is seasoned 30 days prior to assembly.
100% function tested prior to shipping. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$3.93

The Ishino Stone Engine Coolant Thermostat Gasket is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$21.77

Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$562.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part..

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$228.94

Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$84.12

The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Corrosion resistant housings
Nickel-plated or brass terminals for superior conductivity
High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
Thermal switches matched to OEM temperatures to assure consistent performance

from

$84.09

The Four Seasons® Cooling Fan Motor is designed for quiet operation and dependable performance. We understand proper cooling fan operation is essential to everything from vehicle drivability to A/C system performance. But not all Cooling Fan Motor’s are created equal. Why would anyone risk installing an inferior product? Therefore, we go above and beyond with research, validation and testing before we add any new part numbers. Every Four Seasons Cooling Fan Motor is designed and tested to provide years of dependable performance. We provide quality drop-in-replacement units that are designed to O.E specifications.

Product Features:

Out of box, drop in replacements
Factory style connectors
Factory mounts for easy install
Motors that meet or exceed factory performance
Exact fit
Reduced labor time
Higher customer satisfaction

from

$58.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$56.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$159.99

COOLANT HOUSING

from

$5.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Metal where applicable
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.79

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$5.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$63.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$46.15

A/C Hose

from

$58.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$29.49

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$117.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$17.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$41.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$54.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$52.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 1989 Honda Civic with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Honda Civic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Civic functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Cooling and Climate Controls for the 1989 Honda Civic, designed to meet your needs without breaking the bank. From Heating Part replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1989 Honda Civic at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $347.99, with an average price of $48.43. Our 88 Cooling and Climate Controls in stock come from 30 trusted brands, so you’re sure to find the right part for your 1989 Honda Civic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Honda Civic, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $6.29, and at an average 4 stars rating. With 3,630 customer reviews and counting, our 1989 Honda Civic Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Honda Civic is always ready to roll. We’re committed to providing you with everything you need to keep your Civic in top shape, all in one place. Start shopping confidently below for your 1989 Honda Civic!

Best-Selling Heating Parts for 1989 Honda Civics

Enhance the driving experience in your Honda with 2 quality Heating Part components, starting at $59.99.

show more show less

from

$117.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$59.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

Most Popular 1989 Honda Civic Engine Cooling Parts

Customize your Honda with 53 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $280.51.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$18.99

Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$6.29

Original equipment design provides exact fit and performance.

Product Features:

Precise fitting sealing edges prevent leakage and premature cooling.
Self-cleaning and self-aligning thermostat valve.
Stainless steel assembly and springs are engineered for long life and smooth performance.

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$11.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$12.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$7.29

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$12.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$18.79

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$40.05

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$67.99

Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan

from

$141.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$24.29

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$29.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$16.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$12.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$21.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$15.49

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$2.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$21.99

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$39.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$141.99

New Platinum Pro Radiator, 1.5 And 1.6 Liter Engines, Automatic Transmission, 88-91 CRX Auto Or Manual Trans

Product Features:

1.5 And 1.6 Liter Engines, Automatic Transmission, 88-91 CRX Auto Or Manual Trans, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$56.99

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$27.92

NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.

Product Features:

Strict quality control, and functional testing
Self-cleaning and self-aligning thermostat valve
Original equipment design provides exact fit and performance
Precise sealing edges reduce leakage and premature cooling
Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
Stainless steel assembly and springs are engineered for long life

from

$22.29

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$17.79

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$89.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$74.16

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$35.57

METRIX water pumps provide an outstanding coolant flow rate in all driving conditions, from stationary to high speed. Performance is guaranteed through corrosion protection, cavitation resistance, reliable sealing technology, and the use of high quality components. METRIX water pumps deliver optimal hydraulic efficiency with maximum pressure resistance to efficiently protect against over-heating while improving fuel consumption and reducing emissions.

Product Features:

OE Quality – Higher quality and reliable performance compared to competitive products
Exact fit – No additional time consuming steps needed for installation
OE Engineered – Optimal hydraulic efficiency, Maximum pressure resistance
Advanced Impeller Design – Outstanding coolant flow rate, Optimal hydraulic efficiency.
Comes with required O-Rings and gaskets.

from

$36.49

from

$13.43

Water Temperature Sender

from

$5.99

Matches OE form, fit and function
Metal where applicable
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$280.51

The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

OE-Equivalent
Direct fit for easy installation
All Copper Core
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$112.99

Trimline Straight Blade Electric Fan

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$71.17

Auxiliary Fan Motor

from

$50.81

The NTC-Tama Engine Coolant Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$45.39

Water Pump

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$32.00

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$19.21

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$14.99

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$14.93

Water Temperature Se

Top Picks for 1989 Honda Civic Air Conditioning Parts

Upgrade Honda Civics with top-quality Air Conditioning Parts parts, including 27 OEM and aftermarket selections for your 1989 model.

show more show less

from

$17.49

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$17.99

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$52.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

from

$106.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$22.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$72.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$56.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$33.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$347.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$121.73

A/C Condenser Fan Mo

from

$117.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$97.99

This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:

Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – components are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$85.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$84.09

Out of box, drop in replacements
Factory style connectors
Factory mounts for easy install
Motors that meet or exceed factory performance
Exact fit
Reduced labor time
Higher customer satisfaction

from

$59.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$50.42

A/C Hose

from

$49.60

The APA/URO A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$36.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$26.99

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.

from

$25.49

from

$14.29

This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Blower Motor and Related Products for 1989 Honda Civics

Select from 6 premium Blower Motor and Related Products parts for your 1989 Honda Civic, with prices ranging from $12.49 to $141.70.

show more show less

from

$38.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$141.70

Four Seasons manufactures a high quality replacement Blower Motor that meets or exceeds OE design and performance.

Product Features:

OE-Equivalent.
Direct Fit Replacement.
Meet or exceed OE design and performance.
Magnet size and properties compare to or exceed OEM.
Manufacturing facility both QS9000 and ISO 9000 certified.
OE quality electrical components, brushes and bearings.
Balanced rotor assembly.

from

$58.99

Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$63.99

from

$41.99

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$12.49

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

Top-Rated Cooling and Climate Controls Brands For Your 1989 Honda Civic

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1989 Honda Civics. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1989 Civic start at just $6.29 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1989 Honda Civic Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Honda Civic, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1989 Honda Civic. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 1989 Honda Civic Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1989 Honda Civic owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1989 Civic, Advance Auto Parts carries a full inventory of 27 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Honda in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $6.29 to $141.99, plus, with more than 252 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$29.99

This product is not rated

Coolant Temperature Sensor

“”

from
$52.99

This product is not rated

A/C Compressor Relay Connector

“”

from
$21.99

This product is not rated

Temperature Sender With Gauge

“”

FAQs for 1989 Honda Civic Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1989 Honda Civics?

Out of 88 Cooling and Climate Controls that fit 1989 Honda Civics, the following parts are the top sellers:

Radiator Cap: 13 PSI (17110015) – $11.99
Adjustable Thermostatic Fan Control (6016936) – $22.99
Electric Fan – 12" Diameter (6016901) – $94.99

What’s the price range for 1989 Honda Civic Cooling and Climate Controls?

Cooling and Climate Control prices for the 1989 Honda Civic start at $0.99 and go up to $347.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1989 Honda Civic?

The average price for Cooling and Climate Controls for the 1989 Honda Civic is $48.43. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Honda Civic model years?

Yes, we currently carry Cooling and Climate Controls for 51 model years of Honda Civics between 1973 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 1989 Honda Civic?

The cheapest 1989 Honda Civic Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890841) – $1.99
Engine Coolant Thermostat Gasket (10748147) – $2.39
Plastic Drain Cock Screw-In Type Screw-M14-2.0 (22972337) – $2.99

What are the top-rated Cooling and Climate Controls that fit the 1989 Honda Civic?

Out of 3,630 reviews by customers, our 1989 Honda Civic Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1989 Honda Civic and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- Water Pump: New, Installation Gasket Included (20420084) – $18.99
Blower Motor and Related Products
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- Water Pump: New, Installation Gasket Included (20420084) – $18.99
Air Conditioning Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99
- Water Pump: New, Installation Gasket Included (20420084) – $18.99

What types of Cooling and Climate Controls do you sell for my 1989 Honda Civic?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1989 Honda Civic:

Can I get help with 1989 Honda Civic Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Cooling and Climate Controls and more.

What is your return policy for Honda Civic Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Honda Civic Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 Honda Civic Cooling and Climate Controls

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55238)

Febi – Engine Coolant Temperature Sensor (Part No.C6020447062FEB)

Four Seasons – A/C Expansion Valve (Part No.R1045307087AIR)

Ishino – Stone Engine Coolant Thermostat Gasket (Part No.G4031120468ISH)

Dorman – Engine Coolant Thermostat Housing Cover (Part No.G4011121009DOR)

Dorman – Radiator Fan Assembly (Part No.621-967)

Koyo Cooling – Radiator (Part No.G1000187479KCS)

FAE – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G503025846FAE)

Four Seasons – Cooling Fan Motor (Part No.G500690060AIR)

Carquest – HVAC Variable Speed Blower Controller Module Connector (Part No.PT1017)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34193)

Carquest Premium – COOLANT HOUSING (Part No.CH1022)

Beck/Arnley – Water Pump Gasket (Part No.039-4058)

Dorman – 5-Wire Style Relay (Part No.85170)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35480)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Factory Air – Green Round O-Ring (Part No.24650)

Victor Reinz – Engine Coolant Outlet Gasket (Part No.41-10039-00)

Carquest Premium – HVAC Blower Control Switch (Part No.BLA1061)

Metrix – A/C Hose (Part No.R1020321278MTX)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55256)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83003)

Carquest Premium – Heater Core (Part No.398326)

Dorman – Engine Coolant Thermostat Housing (Part No.902-5018)

Dorman – HVAC Blower Motor Resistor (Part No.984-200)

Carquest Premium – Accessory Power Relay (Part No.RAA1815)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

Carquest Premium – Heater Core (Part No.398326)

Carquest Premium – HVAC Cable Operated Open Non-Bypass Heater Valve (Part No.T74620)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1174)

Carquest Premium – Thermostat (Part No.48158)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 13 PSI (Part No.10227)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13878)

Dorman – Help – Radiator Drain Cocks (Part No.61125)

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13879)

Carquest Premium – Radiator Cap: 13 PSI (Part No.10327)

Carquest – Coolant Temperature Sensor (Part No.WT5009)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432106)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Carquest Premium – Coolant Housing/Water Outlet (Part No.84887)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1012)

Motorad UltraStats – Thermostat: 180 Degrees (Part No.5242-180)

Motorad – Standard Thermostat: 170 Degrees (Part No.242-170)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1054)

Motorad UltraStats – Thermostat: 170 Degrees (Part No.5242-170)

Dorman – Plastic Drain Cock Screw-In Type Screw-M14-2.0 (Part No.490-216.1)

Beck/Arnley – Thermostat (Part No.143-0698)

NTK – Engine Coolant Temperature Sensor (Part No.EF0069)

KAI – Radiator (Part No.RAD886)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10180)

NTC – Thermostat (Part No.G4000120400NTC)

Beck/Arnley – Thermostat (Part No.143-0695)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-215)

AISIN – OE Replacement Water Pump (Part No.G300027610ASC)

Metrix – METRIX Water Pump (Part No.G300027610MTX)

Carquest Premium – Engine Cooling Fan Switch (Part No.TFA1021)

NTC – Water Temperature Sender (Part No.P403646668NTC)

Beck/Arnley – Water Pump Gasket (Part No.039-4058)

Koyo Cooling – Metal Core Radiator (Part No.G1000106276KCS)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

VDO – Auxiliary Fan Motor (Part No.G50061572445VDO)

NTC – Tama Engine Coolant Temperature Sensor (Part No.C602060805NTC)

Autopart International Inc – Water Pump (Part No.G3000651197API)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

FAE – Engine Coolant Temperature Sensor (Part No.C602060805FAE)

Dorman – Engine Coolant Thermostat Housing Cover (Part No.G4011120971DOR)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-5042)

Sankei Switches – Water Temperature Se (Part No.P403646668SAK)

Carquest Premium – A/C Filter Drier (Part No.T33278)