1989 GMC P2500 Valve Cover and Cylinder Heads
More 1989 GMC P2500 Valve Cover and Cylinder Heads
Find your specific 1989 GMC P2500 original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 GMC P2500 Valve Cover and Cylinder Heads
ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)
from
$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.
Product Features:
See More
Product Features:
- 7/16″-14 Thread Size(s)
- .700″ Thread Length
- 8740 Chromoly
- 1.75″ Effective Stud Length
- Set of 16
- .800″ Adjuster Thread Depth
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
- Black Oxide
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Sealed Power – Push Rod (Part No.RP-3212R)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Professional racing rods
- 1-Piece forged end rods
- Hardened for guide plate compatibility
- Centerless ground to guarantee concentricity
- Black oxide coated for corrosion protection
- Part numbers are laser etched on each pushrod for positive ID
Sealed Power – Push Rod (Part No.RP-3212R 100)
from
$9.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Professional racing rods
- 1-Piece forged end rods
- Hardened for guide plate compatibility
- Centerless ground to guarantee concentricity
- Black oxide coated for corrosion protection
- Part numbers are laser etched on each pushrod for positive ID
Sealed Power – Engine Intake Valve (Part No.V-1926)
from
$4.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Exhaust Valve (Part No.V-1904)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Valve Lifter (Part No.HT-817)
from
$13.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Competition Cams – LIFTERS, LS SERIES OE STYLE HYD RLR 1 ST (Part No.850-16)
from
$284.99
COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.
Product Features:
See More
Product Features:
- .842″ diameter; 122g weight; 2.66″ seat height
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-2)
from
$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-3)
from
$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Rocker Arm Kit (Part No.R-826)
from
$3.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-973)
from
$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Valve Spring (Part No.VS-677)
from
$2.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72724)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)
from
$119.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 PSI Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)
from
$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)
from
$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 Psi Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.501 SD)
from
$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
- STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
- PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
- SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Engine Cylinder Head Set (Part No.HSU 8726-1)
from
$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets without head gasket(s)
- Requires purchase of head gasket(s) separately
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8726 PT)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.7733 PT-2)
from
$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8501 PT-1)
from
$24.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
Mahle – Mahle Cylinder Head Gasket (Part No.A8100202329MAH)
from
$29.50
Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head gaskets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials
- Packaged in shrink wrapped tray
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9128 PT)
from
$45.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PermaTorque head gaskets meets or exceeds all original equipment specifications
- Unsurpassed quality you can trust
Popular 1989 GMC P2500 Valve Cover and Cylinder Heads Categories
1989 GMC P2500 Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1989 GMC P2500. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 33 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $316.99. That means you can find the exact parts or products you need to keep that 1989 GMC P2500 running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1989 GMC P2500. Sealed Power, Felpro, and Competition Cams are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1989 GMC P2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1989 GMC P2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1989 GMC P2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 GMC P2500 demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your P2500 the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Sealed Power Valve Cover and Cylinder Heads
We carry Sealed Power parts in our stock across Engine Valve Lifters and Engine Valve Locks categories, plus more. For a 1989 GMC P2500, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Top 1989 GMC P2500 Valve Cover and Cylinder Heads from Felpro
Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1989 GMC P2500. Popular Felpro parts include:
FAQs for 1989 GMC P2500 Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1989 GMC P2500?
Out of 33 Valve Cover and Cylinder Heads for the 1989 GMC P2500, the most popular in our inventory are:
