1989 Ford F59 Ball Joints
More 1989 Ford F59 Ball Joints
Find your specific 1989 Ford F59 original or aftermarket Ball Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Ford F59 Ball Joints
Motorcraft – Ball Joint (Part No.L2020335084MTR)
from
$83.44
Motorcraft ball joints feature wrench flats, when feasible, to aid in installation and include new pinch bolt, nut and other necessary parts for attachment. Ball joint-only cartridges to eliminate the unnecessary replacement of entire control arm assemblies.
Product Features:
See More
Product Features:
- Hardened metal stud – Heat-treated for excellent strength and durability, feature the use of castle nuts and cotter pins
- Full ball design – Allows smooth motion to maintain precise alignment and improved handling
- Polymer bearing design – Where applicable, encapsulates the ball stud and eliminates heavy preload to reduce steering effort and minimize wear
- Grease fittings – Where applicable, allow lubrication for future maintenance
- Magnesium phosphate coating – Provides a rust-preventative finish to extend shelf life
- Oversized housing – Provides a better fit for vehicles with slightly worn control arms
- Sealed boots – Feature steel retaining rings, where applicable, to protect joints from contaminants and water
- Directional grease escapements – Allow old grease to be flushed out during maintenance
TRW – Ball Joint (Part No.L2020216936TRW)
from
$61.50
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
ACDelco – Advantage Suspension Ball Joint Assembly (Part No.L2020614251ACD)
from
$35.35
ACDelco Advantage Suspension Ball Joints connect your vehicle’s control arm to its steering knuckle, allowing your wheels to turn and the suspension to move. They serve as the pivot between the wheels and suspension, as well as a support for your vehicle’s weight. These replacement components contain a forged CNC-machined shell, synthetic bearings, and full-ball studs, for high-quality performance and durability. ACDelco Advantage Chassis products provide high-quality parts at a tremendous value. Engineered to the fit, form, and function of a premium aftermarket line, ACDelco Advantage Chassis include tie rod ends, ball joints, control arms, steering and suspension links, steering arms, and bushings – all at an economical price. With ACDelco Advantage parts, installation hardware is included where needed.
Product Features:
See More
Product Features:
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- Heat-treated for enhanced quality and endurance
- Greasable design where applicable, for easy maintenance and longevity
- Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
International Suspension Group – Ball Joint (Part No.L2020246505ISG)
from
$21.25
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
TRW – Ball Joint (Part No.L20201100481TRW)
from
$103.83
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
International Suspension Group – Ball Joint (Part No.L2020216936ISG)
from
$35.80
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Popular 1989 Ford F59 Ball Joints Categories
1989 Ford F59 Ball Joints
Maybe you’re in the middle of a full rebuild of that 1989 Ford F59. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 2 different Ball Joints in our inventory ranging from $83.44 to $103.83. That means you can find the exact parts or products you need to keep that 1989 Ford F59 running smoothly.
Ball Joints are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Ford F59. Motorcraft and TRW are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ball Joints for your 1989 Ford F59, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ball Joints to keep your 1989 Ford F59 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ball Joints Brands To Make Your 1989 Ford F59 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Ford F59 demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your F59 the best it can be. Be sure to browse some of our top Ball Joints brands and parts.
FAQs for 1989 Ford F59 Ball Joints
What are the most purchased Ball Joints for the 1989 Ford F59?
Out of 2 Ball Joints for the 1989 Ford F59, the most popular in our inventory are:
