1989 Ford E-350 Econoline Performance Distributors

Essential 1989 Ford E-350 Econoline Performance Distributors

MSD Ignition – Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95 (Part No.8482)

Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95

from

$52.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Rynite Injection Molded Caps And Retainers
  • Designed w/Performance In Mind
  • High Quality; Voltage Insulating Material
  • Stainless Terminals
See More

Accel – Distributor Cap And Rotor Kit (Part No.8230)

Distributor Cap And Rotor Kit

from

$108.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Accel – Tst Ford 84-97 5.8L 85-88 5.0L (Part No.TST15)

Tst Ford 84-97 5.8L 85-88 5.0L

from

$230.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Includes Everything Needed
  • Resistance High Dielectric Strength Compounds
  • Race Proven
  • Improved Performance
  • Reduced Emissions
See More

Accel – High Performance Distributor Cap & Rotor Kit with Gray Finish (Part No.8234)

High Performance Distributor Cap & Rotor Kit with Gray Finish

from

$54.39
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:
  • See catalog for application information
  • Offers Superior Protection From Arc-Thru and Crossfire
See More

Accel – Distributor Cap And Rotor Kit (Part No.8220)

Distributor Cap And Rotor Kit

from

$64.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Accel – High-Performance Distributor Cap & Rotor Kit (Part No.8233)

High-Performance Distributor Cap & Rotor Kit

from

$53.09
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:
  • Features Protection From Arc Thru And Crossfire
  • Features 60k V Rated Alkyd Compound
  • Brass Terminals Inserts And Steel Rotor Springs
  • High Spark Energy Flow
See More

MSD Ignition – Distributor Cap/Rotor Kit; Ford Duraspark (Part No.8450)

Distributor Cap/Rotor Kit; Ford Duraspark

from

$56.99
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:
  • Designed w/Performance In Mind
  • High Quality Material
  • Stainless Terminals
See More

MSD Ignition – Distributor; Ford V8; 351W (Part No.8584)

Distributor; Ford V8; 351W

from

$427.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Product Features:
  • CNC machined billet aluminum housing and DuPont Rynite base
  • No CARB Exemption Order Number
  • Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
  • Mech. advance assem. can be locked out for crank trigger systems
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
See More

Proform – Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines (Part No.66969R)

Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines

from

$228.99
Fits Ford 289 – 302 (5.0). Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.

Product Features:
  • Street/Strip Version
  • Built-In Coil with Magnetic Trigger
  • Features Red Cap
  • Fits Ford 289-302 5.0 Engines
  • Comes with An Iron Gear and with Not Work with Factory Roller Cams
See More

MSD Ignition – Distributor; Ford 351W; Ready-to-Run (Part No.8354)

Distributor; Ford 351W; Ready-to-Run

from

$569.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

Product Features:
  • Now includes built-in Rev Limiter
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Advance plate and weights are fine blanked from chrome moly steel
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
  • Nylon pads ensure smooth operation of the advance weights
See More

MSD Ignition – Distributor; Ford 351C-460; Vacuum Advance (Part No.8477)

Distributor; Ford 351C-460; Vacuum Advance

from

$570.99
The street Pro-Billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire RPM range of your engine and is completely maintenance-free.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • CARB E.O. Approved
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
See More

MSD Ignition – Distributor; Ford 289/302; Vacuum Advance (Part No.8479)

Distributor; Ford 289/302; Vacuum Advance

from

$494.99
The street pro-billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire rpm range of your engine and is completely maintenance-free.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • CARB E.O. Approved
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
See More

MSD Ignition – Distributor; Ford 289/302; Ready-to-Run (Part No.8352)

Distributor; Ford 289/302; Ready-to-Run

from

$569.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky duration systems or ancient breaker point models. These distributors come complete and Ready-to-Run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs.

Product Features:
  • Now includes built-in Rev Limiter
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • Polished steel shaft is guided by a sealed ball bearing
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • Mech. advance assem. can be locked out for crank trigger systems
See More

MSD Ignition – Distributor; Ford 302; Pro-Billet; Small Cap (Part No.8579)

Distributor; Ford 302; Pro-Billet; Small Cap

from

$399.99
MSD engineers fit all of their high performance distributor experience into a special compact housing designed to be less obtrusive for Ford engines. The diameter of the special cap and housing are 5/8 inch smaller than stock Ford distributors providing extra room in front of the engine. The new MSD cap features spark plug style terminals and is firmly screwed down to the housing. The distributor relies on MSD’s race proven magnetic pick-up and precision reluctor to deliver accurate trigger signals to the MSD ignition throughout high rpm. The reluctor assembly is turned by a hardened steel shaft which rides in a sealed ball bearing for high rpm stability and endurance. Mounted to the top of this shaft is a fully adjustable mechanical advance assembly. The rate at which the chromoly assembly advances the timing is easily controlled by changing the supplied advance springs and stop bushing for total advance.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/small dia. cap w/HEI style terminals; race and rotor
  • Will accept PN[8441] Cap-A-Dapt
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

D4260 Flame-Thrower Distributor Rotor HEI/EST Black

from

$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4260 Flame-Thrower Distributor Rotor HEI/EST Black
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

D4062 Flame-Thrower HEI Distributor Rotor Blue

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4062 Flame-Thrower HEI Distributor Rotor Blue
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Competition Cams – .530" I.D. Composite Distributor Gear for Ford 302-351W (Part No.35100)

.530" I.D. Composite Distributor Gear for Ford 302-351W

from

$143.99
COMP Cams Composite Distributor Gears have undergone stringent testing in various applications with positive results. These super tough gears show great promise in solving the wear issues associated with bronze gears in racing applications. They are available in several shaft diameters for popular street and race applications.

Product Features:
  • Fits .530″ Shaft Diameter, Small Block Ford
  • Manufactured from a super-strong composite material
  • 300% increased durability over bronze distributor gears when used with steel camshafts
  • Tested and available in several shaft diameters for popular street and race applications
See More

Mallory – Distributor Drive Gear (Part No.29420)

Distributor Drive Gear

from

$73.29
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:
  • Replacement Distributor Gear
See More

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)

Chrome Distributor Hold-Down Clamp

from

$13.29
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.

Product Features:
  • Eliminates bolt in favor of stud mount design
  • Chrome plated
  • Ideal For Ignition Distributor
See More

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

D700700 Advance Spring Kit Flame-Thrower Billet Distributor

from

$20.99
Performance mechanical advance springs.

Product Features:
  • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
  • Performance mechanical advance springs.
See More

Accel – Rotor (Part No.130224)

Rotor

from

$17.88
Regain horsepower and economy for your street machine with a new ACCEL performance rotor. ACCEL’s high quality manufacturing process results in rotors offering superior protection from arc-thru and crossfire.

Product Features:
  • Racing Distributor Rotor
  • Standard Height Rotor
See More

MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)

Rotor Assembly; Chevy V8 Cap-A-Dapt

from

$60.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase

Product Features:
  • Rotor phasing can be adjusted.
  • Ideal When Atomic TBI Is Controlling The Timing
See More

1989 Ford E-350 Econoline Performance Distributors

Maybe you’re in the middle of a full rebuild of that 1989 Ford E-350 Econoline. Maybe you just need a couple of Performance Distributors. Either way, Advance Auto Parts has 15 different Performance Distributors in our inventory ranging from $17.88 to $691.99. That means you can find the exact parts or products you need to keep that 1989 Ford E-350 Econoline running smoothly.

Performance Distributors are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Ford E-350 Econoline. MSD Ignition, Accel, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Distributors for your 1989 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 501 reviews in this category, some of the top rated parts include Distributor; Ford 351W; Ready-to-Run with 3.2 stars.

So if you’re in the market for aftermarket Performance Distributors to keep your 1989 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Distributors Brands To Make Your 1989 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Performance Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Performance Distributors brands and parts.

Popular Accel Performance Distributors

We carry Accel parts in our stock across Performance Distributor Cap and Rotor Kits categories, plus more. For a 1989 Ford E-350 Econoline, our most popular Accel Performance Distributors include:
Distributor Cap And Rotor Kit
from $108.99
(8)
Distributor Cap And Rotor Kit
Performance Distributor Cap and Rotor Kits
High Performance Distributor Cap & Rotor Kit with Gray Finish
from $54.39
(26)
High Performance Distributor Cap & Rotor Kit with Gray Finish
Performance Distributor Cap and Rotor Kits
High-Performance Distributor Cap & Rotor Kit
from $53.09
(30)
High-Performance Distributor Cap & Rotor Kit
Performance Distributor Cap and Rotor Kits

Top 1989 Ford E-350 Econoline Performance Distributors from Accel

Accel products are another trusted brand when it comes to Performance Distributors for your 1989 Ford E-350 Econoline. Popular Accel parts include:
Tst Ford 84-97 5.8L 85-88 5.0L
from $230.99
(1)
Tst Ford 84-97 5.8L 85-88 5.0L
Performance Distributor Cap and Rotor Kits

FAQs for 1989 Ford E-350 Econoline Performance Distributors

What are the most purchased Performance Distributors for the 1989 Ford E-350 Econoline?

Out of 15 Performance Distributors for the 1989 Ford E-350 Econoline, the most popular in our inventory are:
Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95
from $52.99
(48)
Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95
Performance Distributor Cap and Rotor Kits
Distributor; Ford TFI; 351W; no Module; Hydraulic Roll
from $580.99
This product is not rated
Distributor; Ford TFI; 351W; no Module; Hydraulic Roll
Performance Distributors
Distributor; Ford V8; 351C; 460
from $438.99
This product is not rated
Distributor; Ford V8; 351C; 460
Performance Distributors

What are the top-rated 1989 Ford E-350 Econoline Performance Distributors?

Top-rated Performance Distributors for your 1989 Ford E-350 Econoline based on customer reviews/ratings are:
Distributor; Ford 351W; Ready-to-Run
from $569.99
(6)
Distributor; Ford 351W; Ready-to-Run
“Reading all these reviews, it’s obvious the poor reviews are from people who didn’t use the product correctly and with the wrong tools. If you can’t ”