1989 Ford E-150 Econoline Transmission Fluids

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

PENTOSIN ATF 44 5L

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

• Maximizes horsepower
• Extends gear and bearing life
• Reduces operating temperature
• Lower coefficient of friction
• Superior corrosion protection
• Separates rapidly from water
• For use with open, limited-slip and locking differential
• Contains limited-slip friction modifier
• Made in USA

Royal Purple HMX SAE 5W-20 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

• Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
• Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
• HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
• Reduces friction and metal-to-metal contact for peak engine performance
• Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
• Superior Engine Cleanliness: Fortified with stout detergents, this oil effectively removes engine build-up and deposits, maintaining cleanliness and promoting engine longevity.
• High-Mileage Protection: Classified as high mileage and composed of synthetic oil, it provides superior protection and performance for older engines.
• Optimal Viscosity: With an SAE oil weight of 5W-20, it ensures optimal viscosity for high-mileage engines, enhancing overall engine efficiency and longevity.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Seal conditioners rejuvenate aging engine seals to help stop and prevent oil leaks
• Extra wear protection helps prevent future engine wear
• Extra detergents help keep older engines cleaner by bonding with and removing sludge and deposits
• Anti-oxidants help prevent oil breakdown preventing engine-clogging sludge and deposit formation
• Advanced Synthetic Blend Formulation: Valvoline High Mileage with MaxLife Technology features an advanced synthetic blend that provides superior protection for engines with over 75,000 miles.
• API SN with SN PLUS Specification: Meets the API SN with SN PLUS specification, offering protection for gasoline direct-injected engines from low-speed pre-ignition, making it suitable for both high mileage and newer cars.

Extended Protection Automatic Transmission Fluid – 6 Quarts

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

• Maximizes horsepower
• Extends gear and bearing life
• Reduces operating temperature
• Lower coefficient of friction
• Superior corrosion protection
• Separates rapidly from water
• For use with open, limited-slip and locking differential
• Contains limited-slip friction modifier
• Made in USA

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• ENHANCED MAXLIFE TECHNOLOGY PREVENTS engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• TREAT AND PREVENT LEAKS with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% EXTRA DEFENSE AGAINST DEPOSITS, sludge, corrosion and rust via interior-cleansing detergents
• EXTREME TEMPERATURE PROTECTION through our high-quality base oils and superior viscosity modifiers
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Wear Protection: Valvoline Full Synthetic High Mileage with MaxLife Technology is fortified with advanced wear additives to safeguard critical engine components, ensuring longevity for vehicles with over 75,000 miles.
• Superior Friction-Fighting Agents: This motor oil includes friction-fighting agents that help reduce friction and heat, protecting your engine from the leading causes of breakdown and expensive repairs.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Enhanced Performance: Royal Purple Motor Oil with Synerlec« additive technology reduces friction, resulting in a 1-3 percent increase in horsepower.
• Superior Protection: Provides superior corrosion protection, ensuring the longevity and reliability of your engine.
• Extended Oil Life: Extends oil life, reducing the frequency of oil changes and maintenance costs.
• Versatile Application: Suitable for use in gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.

FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic  transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of  many transmissions manufactured by North American, Asian, and European OEMs. FRAM  Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion  and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection  against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal  stability, resulting in maximum service life.

Product Features:

• Maintains friction control for smooth shift action and protection against shudder
• Retains high temperature viscosity resulting in maximum oil film thickness and  excellent wear
• Controls sludge, corrosion, and wear of gears
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

Castrol Transmax ATF/CVT Universal is a technologically advanced full-synthetic formulation designed to deliver excellent performance in most of the traditional stepped automatic transmissions and Continuously Variable Transmissions currently in use. It is also suitable for use in hybrids.

Product Features:

• Coverage of over 300 specs/95% of vehicles in operation
• Broad scope of vehicle applications improves workshop efficiency and inventory management
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.Do not use in applications where MERCON® ULV, MERCON® SP, MERCON® LV, MERCON® ULV, Continuously Variable Chain Type Transmission Fluid, Motorcraft® Premium Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended

Use in automatic and manual transmissions and power steering systems previously serviced with MERCON. Also use in FNR5 transmissions previously serviced with FNR5 Automatic Transmission Fluid (XT-9-QMM5)

Do not use in transfer cases where MERCON® ATF was previously recommended

Motorcraft® MERCON® V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil

Castrol Transmax High Mileage is specially formulated for transmissions with over 75,000 miles to deliver superior performance for maximum transmission life. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting and can be used in a wide variety of specifications including DEXRON®-IIIH, MERCON® and JASO-1A.

Product Features:

• Additional seal conditioners help stop leaks.
• Extra cleaning agents reduce varnish and sludge formation.
• Protects against clutch wear and restores smooth shifting.
• Recommended for use in new & older vehicles that require:

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
• Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

Product Features:

• Fully Synthetic
• Advance transmission protection from standard to sever duty
• Resist thermal breakdown, oxidation, varnish and sludge

FRAM Mercon® V ATF is for use in Ford vehicle transmissions and transaxles.  Especially formulated to exhibit better low-temperature flow and better shear-stability,  FRAM Mercon® V ATF meets Ford performance requirements of vehicles specifying  Mercon® V ATF. FRAM Mercon® V ATF is recommended for use in all transmissions,  hydraulic systems, and power steering units manufactured by American, European,  Korean, Japanese and other manufactures from around the world specifying Mercon® V  type transmission fluids.

Product Features:

• Improved foam and corrosion prevention
• Improved oxidation stability
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

Castrol® Transmax DEX/MERC includes enhanced friction durability for smooth transmission performance. Designed for use in older Ford and GM vehicles.

Product Features:

• Enhanced friction durability for smooth transmission performance
• Meets DEXRON®-III H requirements; also satisfies requirements of DEXRON®, DEXRON®-III, IIE, and II; do not use this ATF in applications calling for DEXRON®-VI
• Meets MERCON® requirements; may also be used in power steering applications where MERCON® is required; use Castrol Type F ATF in applications calling for Type F
• Do not use this ATF in applications calling for MERCON® V or MERCON® SP

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
• TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL