1989 Dodge Ram 50 Ignition and Tune-Up Products

Essential 1989 Dodge Ram 50 Ignition and Tune-Up Products

NGK – Spark Plug Wire Set (Part No.9189)

Spark Plug Wire Set

from

$71.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-4009)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$32.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Switch (Part No.CSA2139)

Ignition Switch

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Double Platinum Spark Plug (Part No.41-828)

Double Platinum Spark Plug

from

$8.29
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP65)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Ignition Module (Part No.CBE1151)

Ignition Module

from

$52.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Carquest Premium – Ignition Module (Part No.CBE1097)

Ignition Module

from

$117.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

PerTronix – 91944 Ignitor II Adaptive Dwell Control Mitsubishi Electronic Distributor 4 cyl (Part No.91944)

91944 Ignitor II Adaptive Dwell Control Mitsubishi Electronic Distributor 4 cyl

from

$206.99
The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the en

Product Features:
  • PerTronix 91944 Ignitor II Adaptive Dwell Control Mitsubishi Electronic Distributor 4 cyl
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
See More

PerTronix – 1944 Ignitor Mitsubishi Electronic Distributor 4 cyl (Part No.1944)

1944 Ignitor Mitsubishi Electronic Distributor 4 cyl

from

$154.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1944 Ignitor Mitsubishi Electronic Distributor 4 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Huco – Ignition Igniter (Part No.F2024398892HUC)

Ignition Igniter

from

$81.81
Huco ignition igniters are manufactured to OE specifications and feature electronically welded lead connections to reduce high temperature failure.

Product Features:
  • Well tried and tested OEM quality
  • Connections and housing corrosion protected
  • High thermal resistance and thus functional reliability
  • Depending on the version, also with cooling plate or thermally conductive paste included
See More

MSD Ignition – Wire Set; Super Conductor; 4-cyl. Multi-Angle Plug; Socket/HEI (Part No.31159)

Wire Set; Super Conductor; 4-cyl. Multi-Angle Plug; Socket/HEI

from

$158.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [4] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.50472)

Spark Plug Wire Set

from

$58.49
Spark Plug Wire Set

Carquest Premium – Distributor Reluctor (Part No.REA1006)

Distributor Reluctor

from

$10.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1888)

Distributor Cap and Rotor Kit

from

$14.49
Distributor Cap and Rotor Kit

Carquest Premium – Distributor Cap (Part No.CAC1409)

Distributor Cap

from

$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

YEC – YEC Distributor Cap (Part No.F201043770YEC)

YEC Distributor Cap

from

$23.47
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Suppression
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve
See More

Driveworks – Distributor Rotor (Part No.23013)

Distributor Rotor

from

$9.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Beck/Arnley – Ignition Rotor (Part No.173-7944)

Ignition Rotor

from

$17.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Radio Frequency Interference (RFI) coating where applicable to minimize radio interference
  • Premium material used to maximize rotor durability and helps restore ignition to original condition
  • Constructed to withstand an engine environment
  • Application specific for this vehicle
See More

Carquest – Distributor Rotor (Part No.D221)

Distributor Rotor

from

$18.05
Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-4009)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$43.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1533)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$35.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1543)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$29.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil (Part No.E70)

Ignition Coil

from

$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
  • High temperature enameled wires were specified for better insulation and performance
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
See More

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Blaster 2 Coil: High Performance Ignition Upgrade

from

$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

1989 Dodge Ram 50 Ignition and Tune-Up Products

You count on your 1989 Dodge Ram 50 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 42 Ignition and Tune-Up Products ranging in price from $2.79 to $447.99, you’re sure to find everything you need for your 1989 Dodge Ram 50.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 14 different brands like E3, ACDelco, and Autolite. 1989 Dodge Ram 50 Ignition and Tune-Up Products start as low as $2.79!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 255 extensive product reviews on 1989 Dodge Ram 50 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are PW16TT Platinum TT Spark Plug with 3.4 stars and OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11 with 5.0 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1989 Dodge Ram 50 below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1989 Dodge Ram 50

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Dodge Ram 50 running right for years to come. In our inventory you’ll find brands like E3, ACDelco, Autolite, and even more.

Popular ACDelco Ignition and Tune-Up Products

You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1989 Dodge Ram 50 back on the road. Some of the top-rated ACDelco products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 1989 Dodge Ram 50, and some of our most reviewed parts include:

FAQs for 1989 Dodge Ram 50 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1989 Dodge Ram 50?

Out of 42 Ignition and Tune-Up Products for the 1989 Dodge Ram 50, the most popular in our inventory are:

What are the top-rated 1989 Dodge Ram 50 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1989 Dodge Ram 50 based on customer reviews/ratings are:
PW16TT Platinum TT Spark Plug
from $5.79
(7)
PW16TT Platinum TT Spark Plug
“Fast and easy, plus you accept PayPal”
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11
from $4.79
(5)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11
“Purchased these plugs from Hinson’s Car Quest. They worked perfect. The staff was so much more friendly than other stores I go to. Will definitely be ”
G-Power Spark Plug: Single Platinum Tip Design, BPR6EGP
from $5.49
(5)
G-Power Spark Plug: Single Platinum Tip Design, BPR6EGP
“My favorite spark plug for the 1993 Volvo 240. A significant improvement over the basic copper plug at a nominal increase in price. I change them ever”