1989 Chrysler Lebaron Brake Master Cylinders
More 1989 Chrysler Lebaron Brake Master Cylinders
Find your specific 1989 Chrysler Lebaron original or aftermarket Brake Master Cylinders below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Chrysler Lebaron Brake Master Cylinders
Dorman – Help – Master Cylinder Caps (Part No.42044)
from
$8.99
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42081)
from
$8.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Remanufactured Brake Master Cylinder (Part No.10-2412)
from
$47.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder (Part No.MCA39451)
from
$62.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.023 mm
- Main cylinder hole of measured by the 0.019 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1628)
from
$30.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1945)
from
$22.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 24 mm Bore (Part No.MCA39476)
from
$57.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1866)
from
$44.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1983)
from
$26.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – Brake Master Cylinder MCA99294: New, With Reservoir (Part No.MCA99294)
from
$62.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
- Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All aluminum castings are “hard anodized”
- All iron castings are coated to prevent rust
- Manufacturers all major components in house.
- Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
- All machining done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
- Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
- Assembly is done in clean room insuring no contamination is introduced into final assembly.
- All assemblies are dated coded for 100% accurate trace-ability.
- Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
Wearever – Remanufactured Brake Master Cylinder (Part No.10-1822)
from
$23.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.875" Bore (Part No.MCA39736)
from
$56.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Popular 1989 Chrysler Lebaron Brake Master Cylinders Categories
1989 Chrysler Lebaron Brake Master Cylinders
Maybe you’re in the middle of a full rebuild of that 1989 Chrysler Lebaron. Maybe you just need a couple of Brake Master Cylinders. Either way, Advance Auto Parts has 9 different Brake Master Cylinders in our inventory ranging from $8.99 to $62.99. That means you can find the exact parts or products you need to keep that 1989 Chrysler Lebaron running smoothly.
Brake Master Cylinders are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Chrysler Lebaron. Cardone, Dorman, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Master Cylinders for your 1989 Chrysler Lebaron, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Master Cylinders to keep your 1989 Chrysler Lebaron rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Master Cylinders Brands To Make Your 1989 Chrysler Lebaron Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Chrysler Lebaron demands trusted brand parts and products to keep it running. Many trusted brands of Brake Master Cylinders make up Advance Auto Parts’ inventory, and all are ready to help make your Lebaron the best it can be. Be sure to browse some of our top Brake Master Cylinders brands and parts.
Popular Dorman – Help Brake Master Cylinders
We carry Dorman – Help parts in our stock across Master Cylinder Caps and Gaskets categories, plus more. For a 1989 Chrysler Lebaron, our most popular Dorman – Help Brake Master Cylinders include:
Top 1989 Chrysler Lebaron Brake Master Cylinders from Cardone
Cardone products are another trusted brand when it comes to Brake Master Cylinders for your 1989 Chrysler Lebaron. Popular Cardone parts include:
FAQs for 1989 Chrysler Lebaron Brake Master Cylinders
What are the most purchased Brake Master Cylinders for the 1989 Chrysler Lebaron?
Out of 9 Brake Master Cylinders for the 1989 Chrysler Lebaron, the most popular in our inventory are:
from
$57.99
(4)
New Brake Master Cylinder: With Reservoir, Exact Fit, 24 mm Bore
Brake Master Cylinders
