1989 Chevrolet S10 Blazer Fuel Pumps
More 1989 Chevrolet S10 Blazer Fuel Pumps
Find your specific 1989 Chevrolet S10 Blazer original or aftermarket Fuel Pumps below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Chevrolet S10 Blazer Fuel Pumps
Delphi – Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal (Part No.HP10020)
from
$276.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Lower failure rates due to its innovative design and durability
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Lock Ring, O-rings (Part No.HP10005)
from
$275.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Lower failure rates due to its innovative design and durability
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
Delphi – Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal (Part No.HP10002)
from
$237.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Lower failure rates due to its innovative design and durability
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Lock Ring, O-rings (Part No.HP10004)
from
$130.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Lower failure rates due to its innovative design and durability
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
GM Genuine Parts – Fuel Pump Strainer (Part No.TS7)
from
$13.49
GM Genuine Parts Fuel Pump Strainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These strainers help keep debris from entering your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps keep debris from entering fuel pump
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Delphi – Fuel Pump Strainer (Part No.FS0177)
from
$13.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Bosch – Fuel Pump Strainer (Part No.68006)
from
$11.99
This Bosch fuel strainer is manufactured to greater-than-OE specification for enhanced durability.
Product Features:
See More
Product Features:
- Recommended repair accessories designed to OEM standards to improve the function of the vehicle and uphold product warranty
- Multilayered filter media with 99% efficiency
- Robust aluminum-, plastic-, or surface-treated steel filter housing designed to withstand high pressure thus offering a longer fuel filter service life
- High micron rating comparable to OE
- Always recommend replacing fuel strainer when replacing a fuel pump to ensure long and reliable service life
Carquest Premium – Fuel Pump Strainer FS260352 (Part No.FS260352)
from
$9.49
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Felpro – Multi-Purpose O-Ring (Part No.70015)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
KAI – Electric Fuel Pump (Part No.FMD010049)
from
$49.99
New Platinum Pro Electric Fuel Pump, Digital Dash, New Strainer Required For Warranty
Product Features:
See More
Product Features:
- Digital Dash
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
GM Genuine Parts – Electric Fuel Pump Kit with Seals, Clamp, and Baff (Part No.EP381)
from
$141.99
GM Genuine Parts Electrical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These pumps deliver fuel to your vehicle’s fuel injectors, helping to provide a steady, reliable fuel supply to your vehicle’s engine. Electric pumps are offered in standard turbine or modular assembly as specified for each application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Mechanical Fuel Pump 1542684: Includes Gasket (Part No.1542684)
from
$90.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Pump Sender Assembly (Part No.E3625S)
from
$96.99Product Features:
- All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
- High-efficiency turbine technology provides quiet and precise fuel delivery
- Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
- CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.
- Carquest Hanger fuel pump assemblies offer an exact-fit solution that meets or exceeds OE specifications
Carquest Premium – Wiring Harness (Part No.WH3000)
from
$17.99
CARQUEST wiring harnesses are designed to replace worn, damaged, or corroded electrical connections, delivering reliable performance and long life.
Product Features:
See More
Product Features:
- Provides worry-free electrical performance
- Designed to meet or exceed OE specifications
Carquest Premium – Fuel Pump Pulsator A3541776 (Part No.A3541776)
from
$47.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 1989 Chevrolet S10 Blazer Fuel Pumps Categories
1989 Chevrolet S10 Blazer Fuel Pumps
Maybe you’re in the middle of a full rebuild of that 1989 Chevrolet S10 Blazer. Maybe you just need a couple of Fuel Pumps. Either way, Advance Auto Parts has 18 different Fuel Pumps in our inventory ranging from $3.49 to $276.99. That means you can find the exact parts or products you need to keep that 1989 Chevrolet S10 Blazer running smoothly.
Fuel Pumps are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Chevrolet S10 Blazer. Carquest Premium, Delphi, and GM Genuine Parts are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Fuel Pumps for your 1989 Chevrolet S10 Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 150 reviews in this category, some of the top rated parts include Fuel Pump Strainer with 4.1 stars and Wiring Harness with 2.8 stars.
So if you’re in the market for aftermarket Fuel Pumps to keep your 1989 Chevrolet S10 Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Fuel Pumps Brands To Make Your 1989 Chevrolet S10 Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Chevrolet S10 Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Pumps make up Advance Auto Parts’ inventory, and all are ready to help make your S10 Blazer the best it can be. Be sure to browse some of our top Fuel Pumps brands and parts.
Popular Delphi Fuel Pumps
We carry Delphi parts in our stock across Fuel Pumps and Electric Pump Filter and Strainers categories, plus more. For a 1989 Chevrolet S10 Blazer, our most popular Delphi Fuel Pumps include:
from
$67.99
(48)
Electric Fuel Pump: With Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness w/Connector
Fuel Pumps
FAQs for 1989 Chevrolet S10 Blazer Fuel Pumps
What are the most purchased Fuel Pumps for the 1989 Chevrolet S10 Blazer?
Out of 18 Fuel Pumps for the 1989 Chevrolet S10 Blazer, the most popular in our inventory are:
What are the top-rated 1989 Chevrolet S10 Blazer Fuel Pumps?
Top-rated Fuel Pumps for your 1989 Chevrolet S10 Blazer based on customer reviews/ratings are:
from
$11.99
(7)
Fuel Pump Strainer
“Used product for exactly what it was designed to do it works fine”
from
$99.99
(1)
Hangar Assembly
“Installed this in my 91Jimmy 2 years ago. Only drive it in the winter. Now the one year warranty is over and it was just towed home with the pump bad.”
