1989 Chevrolet K1500 Truck Beds
More 1989 Chevrolet K1500 Truck Beds
Find your specific 1989 Chevrolet K1500 original or aftermarket Truck Beds below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Chevrolet K1500 Truck Beds
Westin – Bedcaps (Part No.72-41101)
from
$103.99
Westin Bed Caps, constructed with high-impact ABS, give your vehicle a finished factory look while protecting your bed railing from the elements. Product installs quickly and easily with sturdy 3M tape. Available with or without stake pocket in black finish.
Product Features:
See More
Product Features:
- Protects bed railing against damage
- Gives vehicle a finished factory look
- Installs quickly and easily with 3M tape
- Matching Tail Cap / Front Cap available
- Will work with tonneau covers, camper shells and tie-downs if properly installed
- Available in Smooth or Ribbed style
- Available with or without stake pocket holes
- Made in the USA
Lund – Genesis Roll Up Tonneau (Part No.96001)
from
$444.99
Cover rolls up in seconds to allow complete access. High quality, tear-resistant fabric. Dual automatic latches make it the most secure cover. Easy adjustment latches provide tight fit. Pre-assembled kits and easy to use clamps. Assured no drill installation in under 20 minutes. Includes adapter kit for use on cargo management systems. Black, leather look.
Product Features:
See More
Product Features:
- Cover Rolls Up In Seconds To Allow Complete Access
- High Quality; Tear-Resistant Fabric
- Dual Automatic Latches Make It The Most Secure Cover
- Easy Adjustment Latches Provide Tight Fit
- Pre-Assembled Kits and Easy To Use Clamps
- Assure A No Drill Installation In Under 20 Minutes
- Includes Adapter Kit For Use On Cargo Management Systems
Extang – Soft Folding, 2 Folds/3 Panels, Not Hinged In Front, Tailgate Lock, Black, Vinyl (Part No.92540)
from
$517.99
The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.
Product Features:
See More
Product Features:
- Lockable Via Tailgate Lock
- Heavy Duty Leather Grain Fabric Provides Clean Lines And A Low Profile Appearance
- Engineered Cab Clamps Attach Directly To Your Bed Flanges Without Damage And Alteration To Your Bed Caps
- EZ-Lock Clamps Requires Minimal Effort To Operate And Self-Locks In Position When Attached To The Bed Flange For Added Security
- Clamping System Attaches To Your Truck In Seconds For Easy Installation
- Rear Tail Section Clamps Operate With Spring Action Handle For Instant Fasten And Release, Clamp Conveniently Stows Away Inside Rail When Not In Use
- Easy To Use Folding Design With Smooth Sleek Looks
Tonno Pro – Hard Fold Bed Cover (Part No.HF-156)
from
$786.99
The HardFold has been designed with an extremely tough all aluminum underbody frame covered with our highest marine grade vinyl on top. This impact resistant cover offers maximum security with the ease of installation and operation. When needing to open, simply unclamp the EZ lock handles and fold the cover forward. The nylon straps hold the cover in the open position when you need to haul your cargo. This cover comes completely assembled with NO DRILLING! Installation time is less than 10 minutes.
Product Features:
See More
Product Features:
- Dual Coated Vinyl
- Won’t Rot Or Mildew
- Water Tite Seals/Carwash Friendly
- No Drill/Easy Installation
- Theft Deterrent
- No Access with Tailgate Lock
- Includes Sure Seal Tailgate Seal, Torch LED Bed Light, Pro Clean 10 oz Spray Vinyl Cleaner, and PVC Truck Work Gloves
KAI – Floor Support (Part No.LKQ1057745)
from
$64.99
New Standard Replacement Bed Floor Support
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Pick Up Bed Crossmember Kit (Part No.926-982)
from
$466.99
When a truck bed crossmember rusts, the only option has been to replace the entire bed. This kit allows replacement of only the failed floor supports to reduce repair costs.
Product Features:
See More
Product Features:
- Saves money – this truck bed floor support repair kit allows you to replace only damaged crossmembers, not the entire bed
- Complete repair – includes 4 bed crossmembers painted in weldable primer and mounting hardware
- Application specific – made to match the dimensions and material for certain Chevrolet and GMC pick-up trucks
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Covercraft – Cab Forward Truck Cover (Part No.C11203PD)
from
$343.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Polycotton covers provide good basic protection for your truck cab forward to the bumper. This woven Polycotton blend is sun and water resistant, while cotton gives a soft touch, protecting your paint.
Product Features:
See More
Product Features:
- Custom Protection for Front Half of Pickup
- Great for Use with a Camper
- Protects Interior From UV & Reduces Heat Build-up
- Easy to Use
- Cab Forward Covers Available in Multiple Fabrics
Covercraft – Cab Forward Truck Cover (Part No.C13897HG)
from
$843.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. As the most heavy duty cover material on the market, the WeatherShield HD is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD is constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.
Product Features:
See More
Product Features:
- Custom Protection for Front Half of Pickup
- Great for Use with a Camper
- Protects Interior From UV & Reduces Heat Build-up
- Easy to Use
- Cab Forward Covers Available in Multiple Fabrics
Covercraft – Cab Forward Truck Cover (Part No.C10649HG)
from
$744.99
Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. As the most heavy duty cover material on the market, the WeatherShield HD is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD is constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.
Product Features:
See More
Product Features:
- Custom Protection for Front Half of Pickup
- Great for Use with a Camper
- Protects Interior From UV & Reduces Heat Build-up
- Easy to Use
- Cab Forward Covers Available in Multiple Fabrics
TrailFX – Round Tube Louver, Without Rear Cab Window Cut Out, Powder Coated, Black, Steel (Part No.H0004B)
from
$385.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Round Tube Louvered Design With Space For The Cab Sliding Rear Window
- Exclusive Design
- Protects The Cab From Cargo That May Shift In The Truck Bed
- Protective Bars Also Function As Convenient Tie Down Point To Brace Or Secure Heavy Cargo
TrailFX – Headache Rack, Round Tube Louver, With Rear Cab Window Cut Out, White (Part No.H0003W)
from
$304.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Round Tube Louvered Design With Space For The Cabs Sliding Rear Window
- Exclusive Design
- Limited 3 Year Warranty
Dee Zee – Mesh, Textured, Black, Aluminum, Used With Cross Bed Tool Box, Curved Design (Part No.DZ95050RTB)
from
$968.99
Even if you secure your cargo properly, it can still happen. Driving on todays hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab rear window. With the Dee Zee Cab Rack this is no longer a concern. Made of 100 Percent 2.5 Inch aluminum tubing with a protective textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra-mesh – for your protection and visibility requirements.
Product Features:
See More
Product Features:
- Rugged Protection For Your Trucks Rear Cab Area
- 2.5 Inch Hexagonal Aluminum Tubing For Rugged Construction
- Heavy-Duty Aluminum Ultra Mesh Offers More Visibility And Protection Depending On Your Needs
- Protective Textured Black Powder Coat Finish Keeps Your Rack Looking Fresh
- Integrated Channel System For Easy Addition Of Accessories
- Install Into Existing Stake Pocket Holes
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124031)
from
$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.114031)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)
from
$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124037)
from
$331.99
With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.
Product Features:
See More
Product Features:
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Rugged Tread Pattern Provides For Safe And Attractive Non-Slip Surface
- Innovative Stylish Design
- Strong Construction To Hold Up Under Extreme Conditions
- Exclusive New Multi-Mount System
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
KAI – Truck Cab Corner (Part No.RRP129)
from
$15.99
New Standard Replacement Driver Side Cab Corner, 21 X 7 X 1
Product Features:
See More
Product Features:
- 21 X 7 X 1, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Corner (Part No.RRP1299)
from
$129.99
New Standard Replacement Driver Side Cab Corner Inner, 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2
Product Features:
See More
Product Features:
- 2 Door Extended Super Cab, 41 X 9 1/2 X 3 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Corner (Part No.RRP128)
from
$15.99
New Standard Replacement Passenger Side Cab Corner, 21 X 7 X 1
Product Features:
See More
Product Features:
- 21 X 7 X 1, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – DogBx (Part No.DZ91782)
from
$309.99
DogBx
KAI – Truck Cab Extension (Part No.RRP1292)
from
$49.99
New Standard Replacement Passenger Side Outer Extension Cab Corner, 27 1/2 X 17 1/2
Product Features:
See More
Product Features:
- 27 1/2 X 17 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Extension (Part No.RRP1291)
from
$49.99
New Standard Replacement Driver Side Outer Extension Cab Corner, 27 1/2 X 17 1/2
Product Features:
See More
Product Features:
- 27 1/2 X 17 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Truck Cab Extension (Part No.LKQ1057700)
from
$33.99
New Standard Replacement Driver Or Passenger Side Cab Corner Extension
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1989 Chevrolet K1500 Truck Beds Categories
1989 Chevrolet K1500 Truck Beds
Maybe you’re in the middle of a full rebuild of that 1989 Chevrolet K1500. Maybe you just need a couple of Truck Beds. Either way, Advance Auto Parts has 52 different Truck Beds in our inventory ranging from $15.99 to $1,073.99. That means you can find the exact parts or products you need to keep that 1989 Chevrolet K1500 running smoothly.
Truck Beds are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Chevrolet K1500. ARIES, CARR, and Tonno Pro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Truck Beds for your 1989 Chevrolet K1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Truck Beds to keep your 1989 Chevrolet K1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Truck Beds Brands To Make Your 1989 Chevrolet K1500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Chevrolet K1500 demands trusted brand parts and products to keep it running. Many trusted brands of Truck Beds make up Advance Auto Parts’ inventory, and all are ready to help make your K1500 the best it can be. Be sure to browse some of our top Truck Beds brands and parts.
FAQs for 1989 Chevrolet K1500 Truck Beds
What are the most purchased Truck Beds for the 1989 Chevrolet K1500?
Out of 52 Truck Beds for the 1989 Chevrolet K1500, the most popular in our inventory are:
from
$249.99
This product is not rated
Durable Truck Headache Rack: Protect Your Cab from Impact and Sun Damage
Truck Cab Protector and Headache Racks
from
$268.99
This product is not rated
Truck Step, Cab Mount; Multi-Fit; Set Of 2; Flat Step; Non-Extendable; Polished Aluminum
Truck Cap Side Steps
from
$268.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
Truck Cap Side Steps
