1989 BMW 325i Oil and Lubricants
More 1989 BMW 325i Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1989 BMW 325i, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1989 BMW 325i Oil and Lubricants
Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.15906D)
from
$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.
Product Features:
See More
Product Features:
- Patented phosphorus replacement technology to help extend the life of your emission system
- 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
- 6x better wear protection (as measured in latest sequence iva engine test)
- 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
- Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
- Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.
FRAM – 5W20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F662)
from
$6.49
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.
FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)
from
$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart (Part No.881166)
from
$35.99
European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
- Extra wear protection vs. industry and oem standards with advanced anti-wear additives
- Superior performance for european gasoline and diesel engines
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
- Premium Protection: Valvoline European Vehicle Full Synthetic Engine Oil is specially designed to extend the life of European-made gasoline and diesel engines, providing premium protection against wear, oil breakdown, and deposits better than industry sta
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)
from
$32.99
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)
from
$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$22.93
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
Popular 1989 BMW 325i Oil and Lubricants Categories
1989 BMW 325i Oil and Lubricants
You count on your 1989 BMW 325i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 65 Oil and Lubricants ranging in price from $6.49 to $38.99, you’re sure to find everything you need for your 1989 BMW 325i.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 6 different brands like Castrol, Fram, and Valvoline. 1989 BMW 325i Oil and Lubricants start as low as $6.49!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 5,384 extensive product reviews on 1989 BMW 325i Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart with 4.9 stars and GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart with 4.8 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1989 BMW 325i below to get started!
Top-Rated Oil and Lubricants Brands For Your 1989 BMW 325i
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 BMW 325i running right for years to come. In our inventory you’ll find brands like Castrol, Fram, Valvoline, and even more.
Popular Valvoline Oil and Lubricants
You’ll find popular Valvoline brand products across Motor Oil and Greases. All are waiting to get your 1989 BMW 325i back on the road. Some of the top-rated Valvoline products in these categories are:
from
$29.99
(6)
High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Engine Oil, 5 Quart
Engine Oil
from
$32.99
(235)
High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon
Multi-Purpose Greases
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1989 BMW 325i, and some of our most reviewed Castrol parts include:
from
$10.49
(670)
GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
FAQs for 1989 BMW 325i Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1989 BMW 325i?
Out of 65 Oil and Lubricants for the 1989 BMW 325i, the most popular in our inventory are:
from
$27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
What are the top-rated 1989 BMW 325i Oil and Lubricants?
Top-rated Oil and Lubricants for your 1989 BMW 325i based on customer reviews/ratings are:
from
$9.99
(333)
GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: No Oil Keeps Engines Cleaner, 1 Quart
“good”
