2002 BMW 325i Oil and Lubricants
More 2002 BMW 325i Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 2002 BMW 325i, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 2002 BMW 325i Oil and Lubricants
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)
from
$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.
Product Features:
See More
Product Features:
- 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Premium-quality base oils and anti-wear additives that help extend the life of your engine
- Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
- Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
- Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
- Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
Castrol – EDGE Extended Performance Full Synthetic 5W30 Motor Oil 1 Quart (Part No.15D47E)
from
$13.49
Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).
Product Features:
See More
Product Features:
- Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA A5/B5, ACEA C2, Ford WSS-M2C961-A1, Meets engine test performance of Chrysler MS-6395 and MS-13340
- 10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
- 6X Better Wear Protection (Based on Seq IVA vs. latest test limit)
FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F640-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5W-20 Full Synthetic Motor Oil, Extends Full Synthetic Motor Life, 1 Quart (Part No.F920)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
- Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
- Fully Licensed GM dexos«1 Gen 2: This oil is fully licensed as GM dexos«1 Gen 2 motor oil, ensuring it meets the high standards required by General Motors for optimal engine performance.
FRAM – 10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)
from
$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
FRAM – High Milage Conventional 10W30 Engine Oil – Helps Restore Seal Condition – 1 Qt (Part No.F665)
from
$6.49
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.
Castrol – EDGE 5W-20 Full Synthetic Engine Oil 1 Quart (Part No.152C82)
from
$11.99
CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
- 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
- 6x better wear protection – as measured in seq iva test vs. latest test limit
- Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
- Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
- Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.
Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.813531)
from
$37.99
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
- Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
- 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
- Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repair
Castrol – EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart (Part No.1598B6)
from
$37.99
Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
- 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
- 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
- Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
- Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.
Valvoline – Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV955)
from
$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.
Product Features:
See More
Product Features:
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
- Exceptional high/low temperature protection defends your motor no matter the weather conditions
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
- Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.
FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)
from
$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart
Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart (Part No.15980E)
from
$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.
Product Features:
See More
Product Features:
- Phosphorus replacement technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
- Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
- Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
- Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.
Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart (Part No.881166)
from
$35.99
European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
- Extra wear protection vs. industry and oem standards with advanced anti-wear additives
- Superior performance for european gasoline and diesel engines
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
- Premium Protection: Valvoline European Vehicle Full Synthetic Engine Oil is specially designed to extend the life of European-made gasoline and diesel engines, providing premium protection against wear, oil breakdown, and deposits better than industry sta
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$22.93
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
Popular 2002 BMW 325i Oil and Lubricants Categories
2002 BMW 325i Oil and Lubricants
You count on your 2002 BMW 325i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 10 Oil and Lubricants ranging in price from $11.79 to $79.99, you’re sure to find everything you need for your 2002 BMW 325i.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 7 different brands like Royal Purple, LIQUI MOLY, and Castrol. 2002 BMW 325i Oil and Lubricants start as low as $11.79!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 366 extensive product reviews on 2002 BMW 325i Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are HP 5W-30 Synthetic Engine Oil meets service class API SL,CL with 4.9 stars and Type TLS Automatic Transmission Fluid – 1 qt with 4.5 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 2002 BMW 325i below to get started!
Top-Rated Oil and Lubricants Brands For Your 2002 BMW 325i
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 BMW 325i running right for years to come. In our inventory you’ll find brands like Royal Purple, LIQUI MOLY, Castrol, and even more.
Popular Castrol Oil and Lubricants
You’ll find popular Castrol brand products across Motor Oil. All are waiting to get your 2002 BMW 325i back on the road. Some of the top-rated Castrol products in these categories are:
Top-Rated Oil and Lubricants
If are what you’re looking for, our inventory holds plenty. We stock brand Oil and Lubricants for your 2002 BMW 325i, and some of our most reviewed parts include:
FAQs for 2002 BMW 325i Oil and Lubricants
What are the most purchased Oil and Lubricants for the 2002 BMW 325i?
Out of 10 Oil and Lubricants for the 2002 BMW 325i, the most popular in our inventory are:
from
$49.99
This product is not rated
HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter
Engine Oil
from
$35.99
This product is not rated
European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart
Engine Oil
What are the top-rated 2002 BMW 325i Oil and Lubricants?
Top-rated Oil and Lubricants for your 2002 BMW 325i based on customer reviews/ratings are:
from
$79.99
(21)
HP 5W-30 Synthetic Engine Oil meets service class API SL,CL
“i purchased the pintw 5w-30 for my jx35 infiniti. I drove away from Nissan after my oil change. i swear i felt like i was driving on AIR ! Amazing d”
