1989 Audi 100 Fluids and Chemicals

Essential 1989 Audi 100 Fluids and Chemicals

Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz. (Part No.AS800Y)

DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz.

from

$7.99
Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:
  • 50,000 Mile Fluid Life
  • Prevent Overheating & Brake Fade with High Grade Formula
  • Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
  • Synthetic, Extended Fluid Life Formula
See More

Pentosin – Super DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter (Part No.1204204)

Super DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter

from

$72.99
Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.

Product Features:
  • Safety against vapor lock
  • Provides superior corrosion resistance
  • Long-term resistance to absorbing and retaining water.
See More

ATE – SL.6 DOT4 Low Viscosity Brake Fluid – 1 Liter (Part No.3C100237682ATE)

SL.6 DOT4 Low Viscosity Brake Fluid - 1 Liter

from

$21.87
Type: ISO Class 6 Dot 4 Brake Fluid Specifications: Meets FMVSS 571.116, DOT 4/DOT 3, SAE J1703 as well as ISO 4925, Class 6 specifications. Volume: 1 Liter The optimal brake fluid for electronic brake systems Since the introduction of ESP, brake fluid must decelerate individual wheels in fractions of a second in order to stabilize the vehicle in critical situations (e. g. a skid). The development of particularly thin bodied brake fluids such as Original ATE SL.6 have been essential in ensuring the rapid response times required for ESP can be attained. The requirement for such fluids has already been incorporated into the design of the ESP system. With conventional brake fluids the system’s reaction times (in critical situations) may be several times longer than with Original ATE SL.6. In practice this may mean that the system cannot stabilize the vehicle. Advantages of Original ATE SL.6

Product Features:
  • Low viscosity (thin-bodied)
  • Permits fastest response by ESP
  • Optimum brake fluid for electronic brake systems like ESP, ABS, TCS, etc.
  • Improved handling safety owing to speedy response of ESP
See More

Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, Prevents Overheating & Brake Fade, 50k miles, 32 oz (Part No.AS801Y)

DOT 4 Brake Fluid: Synthetic, High Grade, Prevents Overheating & Brake Fade, 50k miles, 32 oz

from

$13.49
Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:
  • 50,000 Mile Fluid Life
  • Prevent Overheating & Brake Fade with High Grade Formula*
  • Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
  • Synthetic, Extended Fluid Life Formula
See More

Pentosin – Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant – 1.5 Liters (Part No.8114117)

Pentofrost NF (G11) Silicate European Concentrate Antifreeze / Coolant - 1.5 Liters

from

$20.99
Pentofrost NF is an environmentally friendly antifreeze concentrate for multipurpose applications in water-cooled engines. It does not contain any nitrites, amines or phosphorous containing additives. Pentofrost NF protects all material used in cooling systems and is recommended for non ferrous metals and year-round use. Meets ASTM D-3306. Warning: this product contains substances known to the state of California to cause birth defects or other developmental harm.

Product Features:
  • Manufactured to the OE applications specific formulation.
  • Manufactured to the exact spec of DIN and ASTM D-3306.
  • Protects against corrosion and cavitation.
  • Does not foam.
See More

Prestone – Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon (Part No.AF2100)

Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon

from

$14.99
Prestone All Vehicles antifreeze+coolant (ready to use) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also potect the engine from damage. Internal damage can cause engine part failure, leading to expensive repairs and serious inconveniences. Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs / 300,000 miles and also to protect the internal parts of the engine for 10yrs / 300,000, offically patented by Prestone.

Product Features:
  • Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
  • Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
  • Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
  • Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
See More

Prestone – Antifreeze and Coolant: Concentrate, Universal Platinum, Protects Against Corrosion, 1 Gallon (Part No.AF2500)

Antifreeze and Coolant: Concentrate, Universal Platinum, Protects Against Corrosion, 1 Gallon

from

$22.99
Prestone® Platinum antifreeze+coolant is Prestone’s best universal antifreeze & coolant product. GUARANTEED to work with all vehicles; all makes, models, years & fluid colors. 15+ years, 350,000 miles of protection; the fluid is guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 Deg. F) and overheating / boiling over of the engine (+268 Deg. F). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup & scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling sytem protection, allowing the system to run optimally, like when it was new. Internal buildup & corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:
  • Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT; G05®, G11®, G12®, G12++®, G13®, G30®, G40®, & GG40®. For all engines & engine sizes, new and older engines.
  • 15+ Yr., 350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
  • Includes our most advanced Prestone Cor-Guard® technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs / 350,000 miles.
  • Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
See More

Peak – 10X Antifreeze + Coolant Concentrate for All Vehicles – 1 Gallon (Part No.PKP0B3)

10X Antifreeze + Coolant Concentrate for All Vehicles - 1 Gallon

from

$19.79
PEAK® Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10+ years/300,000+ miles. It is compatible for use with any color or type of antifreeze/coolant in the system.

Product Features:
  • Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
  • Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
  • Provides more than 2X the warranty coverage for 10+ years/300,000+ miles of service
  • Universal formula is compatible with any color or type of antifreeze/coolant
  • Meets the performance requirements of ASTM D3306 and D4985
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Quaker State – 5W-30 Full Synthetic Motor Oil, 1 Quart (Part No.550046169)

5W-30 Full Synthetic Motor Oil, 1 Quart

from

$7.99
Quaker State Full Synthetic Motor Oil SAE 5W-30 contains the most powerful formulation in the Quaker State portfolio. This product offers superior resistance to thermal and viscosity breakdown compared to Quaker State Synthetic Blend Motor Oil. As the engine temperature increases, the heat activated shear stable viscosity modifiers work to maintain oil film thickness that is necessary to prevent engine parts from metal on metal contact which helps extend engine life. This motor oil maintains its viscosity from start to finish, which means it stays in the grade specified by the car manufacturer throughout the recommended oil drain interval. The product also contains special detergents and dispersant additives that are designed to neutralize the harmful acids generated by the combustion process. This helps prevent the formation of sludge and deposits from forming on crucial engine parts. These properties of Quaker State Ultimate Durability full synthetic motor oil make it reliable and suitable for use in high performance vehicles such as sport cars, SUVs, trucks and minivans. It is compatible with biofuels, ranging from E10 to E85 and suitable for hybrid vehicles.

Product Features:
  • Quaker State Ultimate Durability is our most powerful formulation, providing extreme engine performance and protection against deposits, which allows your engine to operate at maximum horsepower
  • No leading synthetic motor oil provides better protection from friction-related wear when compared to industry standard Sequence IVA engine test results
  • Helps protect against the effects of low-speed pre-ignition (LSPI) in modern turbocharged engines.
  • Provides excellent protection against the formation of sludge and other harmful deposits when compared to Quaker State Synthetic Blend Motor Oil
  • Superior lubrication flow and pumpability at high and low temperatures when compared to Quaker State Synthetic Blend Motor Oil
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart

from

$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart

from

$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
See More

ATP – Trans Fluid Additive (Part No.AT-202)

Trans Fluid Additive

from

$14.99
Product Features:
  • Reduces heat & wear
  • Eliminates TQ converter shudder & clutch pack chatter
  • For all automatic transmissions & 4×4 transfer cases
See More

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Gallon (Part No.F420-1G)

Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Gallon

from

$28.99
FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:
  • Good foam and corrosion prevention
  • Safe for seals
  • Promotes smooth shifting
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
  • TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
See More

Castrol – BP Petroleum Autran Syn 295 Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.709732)

BP Petroleum Autran Syn 295 Synthetic Automatic Transmission Fluid, 1 Gallon

from

$71.99
Full-Synthetic; Heavy Duty Automatic Transmission; BP Autran Syn-295 is a full-synthetic, heavy duty automatic transmission fluid approved for use under Allison TES-295. It is formulated to maintain its stability, even under the most severe operating conditions.

Product Features:
  • Formulated with high viscosity index 100% synthetic base fluids and specific additives in order to exceed Allison requirements and provide outstanding wear protection
  • Keeps transmissions cooler, offering excellent shear stability, low oxidation and high heat capacity
  • Provides superior high/low temperature performance due to high VI synthetic base fluids and has excellent corrosion and foaming resistance
  • BP Autran Syn-295 also has an Allison TES-468 approval for use in Allison Hybrid Electric Drive Transmissions
  • Other OEM approvals include Allison C-4, Voith and ZF transmissions
  • BP Autran Syn-295 is an ideal transmission fluid for light duty application vehicles, such as:
  • Inter/intra-city buses & school buses
  • Emergency vehicles
  • Delivery trucks & vans
  • Recreational vehicles & motor homes
  • Refuse vehicles
  • On/off-highway vehicles
See More

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F420)

Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Quart

from

$8.79
FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:
  • Good foam and corrosion prevention
  • Safe for seals
  • Promotes smooth shifting
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
  • TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
See More

Castrol – Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart) (Part No.15ADFA)

Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart)

from

$7.99
Castrol® Transmax DEX/MERC includes enhanced friction durability for smooth transmission performance. Designed for use in older Ford and GM vehicles.

Product Features:
  • Enhanced friction durability for smooth transmission performance
  • Meets DEXRON®-III H requirements; also satisfies requirements of DEXRON®, DEXRON®-III, IIE, and II; do not use this ATF in applications calling for DEXRON®-VI
  • Meets MERCON® requirements; may also be used in power steering applications where MERCON® is required; use Castrol Type F ATF in applications calling for Type F
  • Do not use this ATF in applications calling for MERCON® V or MERCON® SP
See More

Castrol – Transmax ATF High Mileage Automatic Transmission Fluid: 1 Gallon (Part No.1599F1)

Transmax ATF High Mileage Automatic Transmission Fluid: 1 Gallon

from

$49.99
Castrol Transmax High Mileage is specially formulated for transmissions with over 75,000 miles to deliver superior performance for maximum transmission life. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting and can be used in a wide variety of specifications including DEXRON®-IIIH, MERCON® and JASO-1A.

Product Features:
  • Additional seal conditioners help stop leaks.
  • Extra cleaning agents reduce varnish and sludge formation.
  • Protects against clutch wear and restores smooth shifting.
  • Recommended for use in new & older vehicles that require:
See More

FRAM – Full Synthetic Global Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F470)

Full Synthetic Global Multi-Vehicle Automatic Transmission Fluid: 1 Quart

from

$11.49
FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic  transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of  many transmissions manufactured by North American, Asian, and European OEMs. FRAM  Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion  and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection  against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal  stability, resulting in maximum service life.

Product Features:
  • Maintains friction control for smooth shift action and protection against shudder
  • Retains high temperature viscosity resulting in maximum oil film thickness and  excellent wear
  • Controls sludge, corrosion, and wear of gears
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
  • TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
See More

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 5 Gallon (Part No.F420-5)

Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 5 Gallon

from

$96.99
FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors  vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also  recommended for transmissions, power steering systems, and hydraulic systems  requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also  be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is  recommended for use in all transmissions, hydraulic systems, and power steering units  manufactured by American, European, Korean, Japanese and other manufactures from  around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:
  • Good foam and corrosion prevention
  • Safe for seals
  • Promotes smooth shifting
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
  • TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL
See More

Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)

Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz.

from

$9.99
Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:
  • 50,000 Mile Fluid Life
  • Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
  • For use in all manufacturers
  • Conventional Formula – For use in all manufacturers
See More

Febi – Power Steering Fluid (Part No.3J100180781FEB)

Power Steering Fluid

from

$19.00
Power Steering Fluid

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 12 oz (Part No.AS262)

Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 12 oz

from

$6.99
Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:
  • 50,000 Mile Fluid Life
  • Includes Stop Leak Additives to prevent and stop power steering system leaks.
  • Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
  • Conventional Formula – For use in all manufacturers
See More

Prestone – MAX Power Steering Fluid: European Vehicles, With Stop Leak, Enhances System Life, 100k miles, 12 oz (Part No.AS278)

MAX Power Steering Fluid: European Vehicles, With Stop Leak, Enhances System Life, 100k miles, 12 oz

from

$14.99
Prestone® MAX European Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:
  • 100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
  • MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
  • For use in European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others
  • 2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs
See More

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

CHF11S Hi-Perf Power Steering Fluid for European Autos - Approved for Audis

from

$30.66
CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

Febi – Hydraulic Fluid ZH-M (yellow) – 1 Liter (Part No.L707097881FEB)

Hydraulic Fluid ZH-M (yellow) - 1 Liter

from

$18.63
Type: 02615 Applications: For load leveling suspension, hydropneumatic suspension, hydraulic soft top, 4 Matic and ASD (Adaptive Damping System) Specifications: Meets ZHM Fluid Specifications OEM Approvals: MB 343.0 Volume: 1 Liter Febi 02615 mineral-based hydraulic fluid was developed for use in level control systems and central hydraulic systems of vehicles.

Product Features:
  • Ensures excellent protection against oxidation and ageing due to a selected combination of additives.
  • Is used when mineral oil based hydraulic media are recommended because of the operating conditions.
See More

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz (Part No.AS263Y)

Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz

from

$10.49
Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:
  • 50,000 Mile Fluid Life
  • Includes Stop Leak Additives to prevent and stop power steering system leaks.
  • Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
  • Conventional Formula – For use in all manufacturers
See More

1989 Audi 100 Fluids and Chemicals

You count on your 1989 Audi 100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fluids and Chemicals. With 39 Fluids and Chemicals ranging in price from $6.99 to $96.99, you’re sure to find everything you need for your 1989 Audi 100.

Brands matter. If you want to shop a specific Fluids and Chemicals brand, we stock 10 different brands like Prestone, ZEREX, and Fram. 1989 Audi 100 Fluids and Chemicals start as low as $6.99!

One of the best ways to find top quality OEM or aftermarket Fluids and Chemicals is by asking professionals. Short of that, you can shop with confidence thanks to our 4,258 extensive product reviews on 1989 Audi 100 Fluids and Chemicals. Some of the top-rated Fluids and Chemicals products we carry are 5W-30 Full Synthetic Motor Oil, 1 Quart with 4.8 stars and Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. with 4.8 stars.

Did we mention you can order your Fluids and Chemicals from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fluids and Chemicals inventory for your 1989 Audi 100 below to get started!

Top-Rated Fluids and Chemicals Brands For Your 1989 Audi 100

Trusted Fluids and Chemicals OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Audi 100 running right for years to come. In our inventory you’ll find brands like Prestone, ZEREX, Fram, and even more.

Popular Castrol Fluids and Chemicals

You’ll find popular Castrol brand products across Transmission Fluids. All are waiting to get your 1989 Audi 100 back on the road. Some of the top-rated Castrol products in these categories are:
Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart)
from $7.99
(8)
Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart)
Automatic Transmission Fluids

FAQs for 1989 Audi 100 Fluids and Chemicals

What are the most purchased Fluids and Chemicals for the 1989 Audi 100?

Out of 39 Fluids and Chemicals for the 1989 Audi 100, the most popular in our inventory are:
Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon
from $14.99
This product is not rated
Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon
Engine Coolant and Antifreeze
Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon
from $17.99
This product is not rated
Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon
Engine Coolant and Antifreeze

What are the top-rated 1989 Audi 100 Fluids and Chemicals?

Top-rated Fluids and Chemicals for your 1989 Audi 100 based on customer reviews/ratings are:
5W-30 Full Synthetic Motor Oil, 1 Quart
from $7.99
(456)
5W-30 Full Synthetic Motor Oil, 1 Quart
“I used full synthetic 10-30 in my VW Jetta TDI and it works well.”
Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz
from $10.49
(77)
Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz
“Just what I needed for the steering box”