from

$23.99

Product Features:

Brand may vary by location

from

$13.99

Product Features:

O-ring for seal housing
Fits Dana Spicer 30 and AMC Model 35

from

$4.99

Product Features:

Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$146.99

Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 30 and 44
26 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
Strap style

from

$7.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$279.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 30 rear
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$7.96

Differential Carrier

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$7.99

ZIP locker rear switch cover.

Product Features:

Cover for switch
Rear

from

$52.99

Product Features:

Fits standard rotation Dana Spicer 30
Chrome

from

$11.99

Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:

Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
3/8″ x 24 thread

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$3.99

Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:

Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50

from

$39.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$16.92

Pinion Seal, Red

from

$639.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:

Fits Dana Spicer 30 with 27 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$30.99

Product Features:

Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles

from

$12.99

Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:

Roll pin for Dana Spicer 30 and Dana Spicer 44
0.235″ diameter

from

$26.99

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
Left hand thread

from

$12.99

Product Features:

Cover gasket
Fits Dana Spicer 30

from

$441.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 30 without crush sleeve
7.20″ ring gear diameter
26 spline pinion
10 ring gear bolts
3.90 ratio

from

$12.99

Product Features:

Cross pin shaft for Dana Spicer 30
Fits standard open differentials only

from

$6.99

Product Features:

Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM88610 race
All steel construction

from

$151.99

Product Features:

Spider gear kit
Fits Dana Spicer 30 27 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$10.99

Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:

Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
1.560″ I.D.
Fits standard open differentials only

from

$6.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:

Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
3/4″ x 16 thread

1988 Volvo 245 Differentials

More 1988 Volvo 245 Differentials

Essential 1988 Volvo 245 Differentials

Driveworks – Camshaft Seal (Part No.S-99139)

Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)

Professional Parts Sweden – Differential Carrier (Part No.J705017349PPS)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Zip Locker Rear Switch Cover (Part No.34010)

Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

National – Shaft Repair Sleeve (Part No.99139)

SKF – Pinion Seal, Red (Part No.J701050573SKF)

USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)

Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.90 Ratio (Part No.24569)

Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Yukon Gear – Bearing Race Driver (Part No.56015)

USA Standard Gear – Open Spider Gear Set For Dana Spicer 30, 27 Spline (Part No.39005)

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Popular 1988 Volvo 245 Differentials Categories

1988 Volvo 245 Differentials

Differentials Brands To Make Your 1988 Volvo 245 Last

Popular Valvoline Differentials

FAQs for 1988 Volvo 245 Differentials

What are the most purchased Differentials for the 1988 Volvo 245?

What are the top-rated 1988 Volvo 245 Differentials?

More Popular Parts for All Makes