1988 Volkswagen Jetta Suspension Parts

Below you will find various in-demand Volkswagen Suspension Parts, components and accessories for your 1988 Jetta. Advance Auto Parts has popular Jetta parts like Shocks and Struts, Coil and Leaf Springs, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other Jetta model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1988 Volkswagen Jetta Suspension Parts below and start saving instantly.

Popular 1988 Volkswagen Jetta Suspension Parts Categories

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Suspension Strut Bumper and Bellows Kits

Suspension Air Compressor Relays

Lower Control Arms

Suspension Strut Mounting Kits

Shock Boots, Levelers, and Accessories

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Coil Spring Insulators

Suspension Strut Mount Kits

Coil Spring Seats

Strut Mount Bushings

Shock Absorber Nuts

Suspension Control Arm Spacers

Essential Suspension Parts for 1988 Volkswagen Jettas

from

$129.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$10.29

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$80.99

A critical rear end bushing for any front wheel drive vehicle as it absorbs all the cornering and braking energy. Over compliance leads to early wear and tear, especially in performance applications. Reduce rear end cornering squirm and improve braking efficiencies with the Whiteline beam axle kit.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$99.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$53.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$20.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$40.49

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$85.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$37.49

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$34.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$56.99

from

$9.99

This relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.40

The Febi Control Arm Spacer is manufactured using only the highest quality materials and is designed to OE specifications.

Product Features:

OE-Equivalent
Direct fit application
Meets or exceeds OEM specifications

from

$6.65

Strut Bellow

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$26.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Made from a high grade rubber compound
Quality construction for durability
Made with premium materials
Application specific for this vehicle

from

$46.45

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$6.97

The Kolb strut mount bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$30.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$30.49

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$26.49

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$75.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$43.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$58.99

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$10.40

The FEBI Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$24.93

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$40.99

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$23.87

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Upgrade your 1988 Volkswagen Jetta with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1988 Volkswagen Jetta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Suspension Parts are key to keeping your Jetta functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Suspension Parts for the 1988 Volkswagen Jetta, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Coil and Leaf Springs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1988 Volkswagen Jetta at great prices. Our Suspension Parts inventory for this model ranges from just $1.23 to $129.99, with an average price of $32.06. Our 38 Suspension Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1988 Volkswagen Jetta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Volkswagen Jetta, we stock popular OEM and aftermarket Suspension Parts from top names like Dorman, Moog, Monroe, and more. Dorman Suspension Parts start at just $9.99 and boast an impressive 4 stars average rating from customers. Moog and Monroe also bring quality to the table, with Suspension Parts available starting at $17.29, and at an average 4 stars rating. With 305 customer reviews and counting, our 1988 Volkswagen Jetta Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Volkswagen Jetta is always ready to roll. We’re committed to providing you with everything you need to keep your Jetta in top shape, all in one place. Start shopping confidently below for your 1988 Volkswagen Jetta!

Best-Selling Shocks and Struts for 1988 Volkswagen Jettas

Enhance the driving experience in your Volkswagen with 12 quality Shocks and Strut components, starting at $1.23.

show more show less

from

$33.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$71.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$34.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$37.49

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$73.55

The KYB Excel-G OE-equivalent direct fit Strut Insert is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions.

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

from

$43.95

Strut Mounting Kit

from

$31.23

STRUT BELLOW

from

$30.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$6.52

The Febi strut mount bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$3.59

Strut Bellow

from

$1.23

Exhaust Flange Nut

Top Picks for 1988 Volkswagen Jetta Air Suspension and Kits

Upgrade Volkswagen Jettas with top-quality Air Suspension and Kits parts, including 6 OEM and aftermarket selections for your 1988 model.

show more show less

from

$9.99

Direct replacement – this relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.49

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$30.49

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$10.29

from

$129.99

Meets or exceeds OE requirements
Helps restore vehicle ride.
Reduces tire wear

from

$3.38

Relay

In-Demand Control Arms for 1988 Volkswagen Jettas

Select from 16 premium Control Arms parts for your 1988 Volkswagen Jetta, with prices ranging from $1.40 to $124.99.

show more show less

from

$19.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$124.99

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$70.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$62.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$57.78

Control Arm

from

$32.26

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance
Extensive on-road testing at TRW tracks around the world

from

$26.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$20.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$10.89

The Meyle Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$8.90

The ISG Control Arm Bushing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.08

The Meyle Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$5.30

The ISG Control Arm Bushing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$4.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$1.63

Control Arm Spacer

from

$1.43

The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$1.40

The Febi Control Arm Spacer is manufactured using only the highest quality materials and is designed to OE specifications.

Product Features:

OE-Equivalent
Direct fit application
Meets or exceeds OEM specifications

Top-Rated Suspension Parts Brands For Your 1988 Volkswagen Jetta

Shop for the best-rated brands offering Suspension Parts and other products for your 1988 Volkswagen Jettas. Below you’ll find some of our best rated Suspension Parts from Dorman, Moog, and Monroe, and more. Suspension Parts from these brands that fit a 1988 Jetta start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1988 Volkswagen Jetta Suspension Parts

When it comes to maintaining or upgrading your 1988 Volkswagen Jetta, using quality Suspension Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Suspension Parts, specifically designed for the 1988 Volkswagen Jetta. With over 3 Dorman brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $33.99. Plus, with over 8 customer reviews and an average rating of 4 stars, you can trust that our Dorman Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$9.99

(8)

30 AMP 12 Volt 4 Pin Universal Relay

“I used this unit to reconfigure my ignition on my 1974 C-10. Easy to wire up & so far everything is working fine.”

from
$20.99

This product is not rated

Suspension Control Arm Bushing

“”

from
$70.99

This product is not rated

Suspension Control Arm

“”

Popular Moog 1988 Volkswagen Jetta Suspension Parts

Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 1988 Volkswagen Jetta owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1988 Jetta, Advance Auto Parts carries a full inventory of 4 Moog Suspension Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Moog Suspension Parts range from $17.29 to $36.99, plus, with more than 12 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$17.29

This product is not rated

Coil Spring Seat

“”

from
$19.49

This product is not rated

Control Arm Bushing

“”

from
$36.99

This product is not rated

Suspension Strut Bellows

“”

FAQs for 1988 Volkswagen Jetta Suspension Parts

Which Suspension Parts are best-sellers for 1988 Volkswagen Jettas?

Out of 38 Suspension Parts that fit 1988 Volkswagen Jettas, the following parts are the top sellers:

Strut Bellows (20518181) – $34.99
Control Arm Bushing (20517928) – $19.49
Multi Purpose Relay (12459837) – $10.29

What’s the price range for 1988 Volkswagen Jetta Suspension Parts?

Suspension Part prices for the 1988 Volkswagen Jetta start at $1.23 and go up to $129.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1988 Volkswagen Jetta?

The average price for Suspension Parts for the 1988 Volkswagen Jetta is $32.06. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Volkswagen Jetta model years?

Yes, we currently carry Suspension Parts for 44 model years of Volkswagen Jettas between 1980 and 2024. Suspension Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Suspension Parts for my 1988 Volkswagen Jetta?

The cheapest 1988 Volkswagen Jetta Suspension Parts we carry in stock are:

Exhaust Flange Nut (12504014) – $1.23
Control Arm Spacer (10780981) – $1.40
Control Arm Bushing (10781686) – $1.43
Control Arm Spacer (11985451) – $1.63
Relay (10952553) – $3.38

What are the top-rated Suspension Parts that fit the 1988 Volkswagen Jetta?

Out of 305 reviews by customers, our 1988 Volkswagen Jetta Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1988 Volkswagen Jetta and their top-rated products:

Shocks and Struts
- Strut Bellow (11050000) – $33.99
- OESpectrum Strut (19710620) – $71.99
- Strut Bellows (20518181) – $34.99

What types of Suspension Parts do you sell for my 1988 Volkswagen Jetta?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1988 Volkswagen Jetta:

Can I get help with 1988 Volkswagen Jetta Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Suspension Parts and more.

What is your return policy for Volkswagen Jetta Suspension Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Jetta Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Volkswagen Jetta Suspension Parts

Rare Parts – STRUT MOUNT KIT (Part No.RP53222)

Carquest Premium – Multi Purpose Relay (Part No.RAA1245)

Whiteline – Beam Axle Front Bushing (Part No.W63205)

Dorman – Suspension Control Arm (Part No.521-548)

Monroe – Gas-Matic Strut (Part No.81933)

Energy Suspension – Coil Spring Isolator Set (Part No.15.6104R)

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55984)

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5611)

Monroe – Strut-Mate Strut Boot Kit (Part No.63630)

MOOG – Strut Bellows (Part No.K90460)

Carquest Premium – Multi Purpose Relay (Part No.RAA2125)

Dorman – 30 AMP 12 Volt 4 Pin Universal Relay (Part No.84601)

Febi – Control Arm Spacer (Part No.L204666996FEB)

International Suspension Group – Strut Bellow (Part No.L303717742ISG)

MOOG – Suspension Strut Bellows (Part No.K90466)

Beck/Arnley – Strut Mount (Part No.101-4382)

Lemfoerder – Strut Mount (Part No.L3030530623LEM)

Kolb – Strut Mount Bushing (Part No.L303185062KOL)

Energy Suspension – Strut Tower Bushing Set (Part No.15.8101G)

Monroe – Strut-Mate Strut Boot Kit (Part No.63618)

Monroe – Strut-Mate Strut Mounting Kit (Part No.901966)

Monroe – Strut-Mate Strut Mounting Kit (Part No.902906)

Monroe – Strut-Mate Strut Mounting Kit (Part No.904905)

Rare Parts – Spring Seat (Part No.RP52964)

Febi – Spring Seat (Part No.L5005946772FEB)

APA/URO Parts – Spring Seat (Part No.L5005946812APA)

Rare Parts – Coil Spring Seat (Part No.RP46369)

APA/URO Parts – Spring Seat (Part No.L5005946811APA)

Driveworks – Strut Bellow (Part No.DW-K90461)

Monroe – OESpectrum Strut (Part No.71265)

MOOG – Strut Bellows (Part No.K90460)

Monroe – Strut-Mate Strut Boot Kit (Part No.63630)

MOOG – Suspension Strut Bellows (Part No.K90466)

KYB – Excel-G Strut Insert (Part No.L300519923KYB)

Autopart International Inc – Strut Mounting Kit (Part No.L30332074346API)

KYB – STRUT BELLOW (Part No.L303734950KYB)

Energy Suspension – Strut Tower Bushing Set (Part No.15.8101G)

Febi – Strut Mount Bushing (Part No.L303134584FEB)

Rein – Strut Bellow (Part No.L303724280RIN)

Elring – Exhaust Flange Nut (Part No.H10082671599ELR)

Energy Suspension – Coil Spring Isolator Set (Part No.15.6103R)

Rare Parts – Spring Seat (Part No.RP52964)

Rare Parts – Coil Spring Seat (Part No.RP46369)

MOOG – Coil Spring Seat (Part No.K90228)

Dorman – 30 AMP 12 Volt 4 Pin Universal Relay (Part No.84601)

Monroe – Strut-Mate Strut Mounting Kit (Part No.901966)

Monroe – Strut-Mate Strut Boot Kit (Part No.63618)

Carquest Premium – Multi Purpose Relay (Part No.RAA1245)

Rare Parts – STRUT MOUNT KIT (Part No.RP53222)

Meyle – Relay (Part No.P2020422128MEY)

MOOG – Control Arm Bushing (Part No.K90719)

Rare Parts – Control Arm (Part No.RP13100)

Dorman – Suspension Control Arm (Part No.526-990)

Whiteline – Control Arm Lower Inner Front Bushing (Part No.W52091)

Autopart International Inc – Control Arm (Part No.L20001971210API)

TRW – Control Arm Bushing (Part No.L203028834TRW)

Rare Parts – Control Arm Bushing (Part No.RP22445)

Dorman – Suspension Control Arm Bushing (Part No.533-688)

Meyle – Control Arm Bushing (Part No.L203093240MEY)

International Suspension Group – Control Arm Bushing (Part No.L203093240ISG)

Meyle – Control Arm Bushing (Part No.L203028834MEY)

International Suspension Group – Control Arm Bushing (Part No.L203028834ISG)

Rein – Bushing (Part No.AVB0153R)

International Suspension Group – Control Arm Spacer (Part No.L204666996ISG)

FEQ – Control Arm Bushing (Part No.L203028834FEQ)

Febi – Control Arm Spacer (Part No.L204666996FEB)