1988 Volkswagen Cabriolet Exhaust Parts
More 1988 Volkswagen Cabriolet Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1988 Volkswagen Cabriolet, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1988 Volkswagen Cabriolet Exhaust Parts
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81102)
from
$678.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53134)
from
$99.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53134 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
BRExhaust – Exhaust Flange Gasket (Part No.256-234)
from
$19.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
HJS – Exh. Man. to Pipe Ga (Part No.H4003121297HJS)
from
$4.63
Exh. Man. to Pipe Ga
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94063)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-27898-20)
from
$9.29
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Ajusa – Exhaust Manifold Gasket (Part No.A811129910AJU)
from
$2.55
Exhaust Manifold Gasket
Walker – Hanger Length 2.375 (Part No.35143)
from
$7.79
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Vaico – Exhaust Hanger (Part No.H805033758VCO)
from
$2.75
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More
BRExhaust – Exhaust Hanger (Part No.255-809)
from
$7.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Meyle – Exhaust Stud (Part No.H100525458MEY)
from
$2.12
Exhaust Stud
HJS – Cat. Converter Gaske (Part No.H4001419845HJS)
from
$3.46
Cat. Converter Gaske
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18434)
from
$96.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
BRExhaust – Exhaust Clamp (Part No.250-348)
from
$5.29
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Bracket (Part No.251-235)
from
$10.99
BRExhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re conveniently available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts are manufactured from premium rubber and steel to help keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
HJS – Exhaust Clamp (Part No.H802056162HJS)
from
$5.99
Exhaust Clamp
Bosal – CLAMP – EXHAUST (Part No.4I200118404BSL)
from
$5.73
CLAMP – EXHAUST
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Popular 1988 Volkswagen Cabriolet Exhaust Parts Categories
1988 Volkswagen Cabriolet Exhaust Parts
You count on your 1988 Volkswagen Cabriolet to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 26 Exhaust Parts ranging in price from $1.99 to $511.99, you’re sure to find everything you need for your 1988 Volkswagen Cabriolet.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 12 different brands like Walker, Flowtech, and Felpro. 1988 Volkswagen Cabriolet Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 1988 Volkswagen Cabriolet Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 2.5 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1988 Volkswagen Cabriolet below to get started!
Top-Rated Exhaust Parts Brands For Your 1988 Volkswagen Cabriolet
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Volkswagen Cabriolet running right for years to come. In our inventory you’ll find brands like Walker, Flowtech, Felpro, and even more.
Popular Flowtech Exhaust Parts
You’ll find popular Flowtech brand products across Exhaust Tips. All are waiting to get your 1988 Volkswagen Cabriolet back on the road. Some of the top-rated Flowtech products in these categories are:
FAQs for 1988 Volkswagen Cabriolet Exhaust Parts
What are the most purchased Exhaust Parts for the 1988 Volkswagen Cabriolet?
Out of 26 Exhaust Parts for the 1988 Volkswagen Cabriolet, the most popular in our inventory are:
from
$17.99
(3)
Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
What are the top-rated 1988 Volkswagen Cabriolet Exhaust Parts?
Top-rated Exhaust Parts for your 1988 Volkswagen Cabriolet based on customer reviews/ratings are:
from
$99.99
(2)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“The only issue I had with it was that one side was not round so it was harder to install than it should of been”
