1988 Toyota Cressida Steering and Chassis Parts
Find Your Specific 1988 Toyota Cressida Steering and Chassis Parts
Below you will find various in-demand Toyota Steering and Chassis Parts, components and accessories for your 1988 Cressida. Advance Auto Parts has popular Cressida parts like Steering Knuckles, Tie Rods, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Cressida model years including
1983,
1984,
1985,
1986,
1987,
1989,
1990,
1991,
1992 and more. Select a category of 1988 Toyota Cressida Steering and Chassis Parts below and start saving instantly.
Popular 1988 Toyota Cressida Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 1988 Toyota Cressidas
Whiteline – Sway Bar Link Outer Bushing (Part No.W22107)
from
$22.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Beck/Arnley – Ball Joint Front Lower (Part No.101-4140)
from
$39.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Necessary hardware supplied as needed for a complete installation
- Hardware functionality matches original design requirements
- Application specific for this vehicle
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Cardone – Remanufactured Power Steering Pump (Part No.21-5836)
from
$92.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Female Inv. Flare x 16mm Male Inv. Flare (Part No.35626)
from
$125.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Sway Bar Link (Part No.RP18477)
from
$98.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Powercraft – Rack Pinion Seal Kit (Part No.8694)
from
$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Rack & Pinion Bellows Kit (Part No.K8581)
from
$28.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Carquest Premium – 5/8" I.D. Reservoir Hose (J189) (Sold by the foot) (Part No.34998)
from
$11.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Rated at 275 Deg. F
- Inside Diameter: 5/8″
- Shape: Straight
- Outside Diameter: 0.91 in
- Priced and sold by the foot. See Store for details.
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Beck/Arnley – Outer Tie Rod End (Part No.101-1873)
from
$29.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Rare Parts – Tie Rod End (Part No.RP26968)
from
$62.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Rare Parts – Sway Bar Bushing (Part No.RP16132)
from
$17.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Whiteline – Sway Bar Mount Bushing (Part No.W21047G)
from
$21.99
Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Rare Parts – Ball Joint (Part No.RP10295)
from
$48.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Carquest Premium – 5/8" I.D. Reservoir Hose (Part No.35003)
from
$53.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Dorman – Suspension Control Arm (Part No.520-429)
from
$69.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Control Arm with Ball Joint (Part No.RP10513)
from
$205.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Conrol Arm W/Bj (Part No.RP11650)
from
$111.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1675)
from
$205.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1655)
from
$194.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Upgrade your 1988 Toyota Cressida with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 1988 Toyota Cressida, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Cressida functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Steering and Chassis Parts for the 1988 Toyota Cressida, designed to meet your needs without breaking the bank.
From
Steering Knuckle
replacements to
Tie Rods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1988 Toyota Cressida at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $2.99 to $205.99, with
an average price of $44.54.
Our 49 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1988 Toyota Cressida without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Toyota Cressida, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Imperial, Carquest Premium, Driveworks, and more.
Imperial Steering and Chassis Parts
start at just $11.49 and boast an impressive 4 stars average rating from customers.
Carquest Premium and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $2.99, and at an average 4 stars rating.
With 362 customer reviews and counting, our 1988 Toyota Cressida Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1988 Toyota Cressida is always ready to roll. We’re committed to providing you with everything you need to keep your Cressida in top shape, all in one place.
Start shopping confidently below for your 1988 Toyota Cressida!
Best-Selling Steering Knuckles for 1988 Toyota Cressidas
Enhance the driving experience in your Toyota with 1 quality Steering Knuckle components, starting at $8.99.
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Most Popular 1988 Toyota Cressida Tie Rods
Customize your Toyota with 8 Tie Rods products
like Tie Rod Ends and
Tie Rod End Boots, all
priced under $79.99.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Rare Parts – Tie Rod End (Part No.RP26972)
from
$79.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP26968)
from
$62.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP26982)
from
$55.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Beck/Arnley – Tie Rod End (Part No.101-4022)
from
$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Autopart International Inc – Tie Rod End (Part No.M30101980958API)
from
$16.19
Tie Rod End
Top Picks for 1988 Toyota Cressida Sway Bars
Upgrade Toyota Cressidas with top-quality Sway Bars parts, including 8 OEM and aftermarket selections for your 1988 model.
MOOG – Stabilizer Bar Link Kit (Part No.K700525)
from
$25.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Sway Bar Link Kits (Part No.DW-K90130)
from
$11.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Carquest Premium – Stabilizer Bar Link Kit (Part No.500-94430)
from
$22.29
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Bushing (Part No.RP16866)
from
$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP15974)
from
$24.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Whiteline – Sway Bar Link Bushing (Part No.W21014)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Driveworks – Suspension Sway Bar Link Kit (Part No.DW-K9224)
from
$9.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
In-Demand Power Steering Parts for 1988 Toyota Cressidas
Select from 27 premium Power Steering Parts parts for your 1988 Toyota Cressida, with prices ranging from $2.99 to $194.99.
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$7.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)
from
$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)
from
$52.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1655)
from
$194.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Powercraft – Rack Pinion Seal Kit (Part No.8694)
from
$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male Inv. Flare x 16mm Male Inv. Flare (Part No.36943)
from
$113.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone – Remanufactured Power Steering Pump (Part No.21-5613)
from
$109.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Rare Parts – Rack & Pinion Bellows (Part No.RP27375)
from
$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
BBB Industries – Power Steering Filter (Part No.991-FLT4)
MOOG – Rack & Pinion Bellows Kit (Part No.K8581)
from
$28.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
BBB Industries – Power Steering Filter (Part No.991-FLT2)
BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)
from
$28.99
POWER STEERINGFILTER
EMPI – Steering Rack Boot Kit (Part No.M1030165841EMP)
from
$19.95
Steering Rack Boot Kit
BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)
from
$6.99
POWER STEERINGFILTER
Most Sold 1988 Toyota Cressida Ball Joints
Explore our best-selling Toyota parts for the 1988 Cressida among 5 OEM and aftermarket options starting from $29.99.
Rare Parts – Control Arm with Ball Joint (Part No.RP10513)
from
$205.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP10596)
from
$205.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Ball Joint (Part No.RP10295)
from
$48.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Beck/Arnley – Ball Joint Front Lower (Part No.101-4140)
from
$39.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Necessary hardware supplied as needed for a complete installation
- Hardware functionality matches original design requirements
- Application specific for this vehicle
Dorman – Suspension Control Arm (Part No.520-427)
from
$29.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Top-Rated Steering and Chassis Parts Brands For Your 1988 Toyota Cressida
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1988 Toyota Cressidas. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Carquest Premium, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1988 Cressida start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 1988 Toyota Cressida Steering and Chassis Parts
When it comes to maintaining or upgrading your 1988 Toyota Cressida, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1988 Toyota Cressida. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
(27)
“Perfect for my transmission cooler holds it very good in place”
Popular Carquest Premium 1988 Toyota Cressida Steering and Chassis Parts
Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1988 Toyota Cressida owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1988 Cressida, Advance Auto Parts carries a full inventory of 7 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $2.99 to $113.99, plus, with more than 18 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 1988 Toyota Cressida Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 1988 Toyota Cressidas?
Out of 49 Steering and Chassis Parts that fit 1988 Toyota Cressidas, the following parts are the top sellers:
- Taper Bearing Set (5050499) – $8.99
- 3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $7.79
- New Power Steering Filter (10417593) – $31.99
What’s the price range for 1988 Toyota Cressida Steering and Chassis Parts?
Steering and Chassis Part prices for the 1988 Toyota Cressida start at $2.99 and go up to $205.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 1988 Toyota Cressida?
The average price for Steering and Chassis Parts for the 1988 Toyota Cressida is $44.54. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Toyota Cressida model years?
What are the cheapest Steering and Chassis Parts for my 1988 Toyota Cressida?
The cheapest 1988 Toyota Cressida Steering and Chassis Parts we carry in stock are:
- 3/8" ID Return Hose (sold by each) (18070570) – $2.99
- Bearings (3277461) – $5.79
- Tie Rod Dust Boot (22906873) – $5.99
- Tie Rod Dust Boot (22906874) – $5.99
- POWER STEERINGFILTER (50167394) – $6.99
What are the top-rated Steering and Chassis Parts that fit the 1988 Toyota Cressida?
Out of 362 reviews by customers, our 1988 Toyota Cressida Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1988 Toyota Cressida and their top-rated products:
- Steering Knuckles
- Taper Bearing Set (5050499) – $8.99
- Tie Rods
- Taper Bearing Set (5050499) – $8.99
- Sway Bars
- Taper Bearing Set (5050499) – $8.99
What types of Steering and Chassis Parts do you sell for my 1988 Toyota Cressida?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1988 Toyota Cressida:
Can I get help with 1988 Toyota Cressida Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Steering and Chassis Parts and more.
What is your return policy for Toyota Cressida Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Toyota Cressida Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
