Name: Piston Ring Set
Brand: Goetze
SKU: A2050243382GOE
Price: 35.36 USD

from

$35.36

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

Maximum durability
High wear and corrosion resistance
Excellent heat-conducting capacity
Optimal fit

from

$23.00

Camshaft Gear Spacer

from

$18.56

Oil Return Tube

from

$3413.18

For years, SSI has set the standard for Porsche stainless exhaust heat exchangers. Each unit is a literal work of art, with craftsmanship that rivals the finest German artisans. It’s a shame these beauties are hidden underneath the car when it’s on the ro

Product Features:

911-107-739-10-M127 – One (1) needed
911-107-729-10-M127 – For cars WITH a Front Oil Cooler
911-107-728-00-M20 – For cars WITHOUT a Front Oil Cooler

from

$2.40

Valve Keeper

from

$88.27

Intermediate Gear, Intermediate Shaft Gear

from

$224.49

The REIN Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$92.89

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$1260.06

This Original Equipment Timing Tensioner Update Kit is used to convert mechanical camshaft chain tensioners to oil pressure feed type. May require 2, 930 105 513 00 tensioner spacer. This kit contains the following:

Product Features:

2 Timing covers with locknuts
2 Hydraulic tensioners
Oil lines

from

$236.85

Camshaft Gear

from

$333.02

Intermediate Gear

from

$17.84

Connecting Rod Bolt

from

$94.82

WARNING: This item cannot be returned for a replacement or refund if opened! The Original Equipment valve cover gasket set is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

OE Quality
Improved reliability, durability, and engine performance
Reduced oil consumption
Embossment shapes designed to improve durability

from

$1.62

Oil Line Ferrule

from

$13.11

The Canyon Engine Valve Guide is manufactured using Phosphorous Bronze and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.

Product Features:

OE Quality
Same design as the original equipment part
Manufactured from Phosphorous Bronze material
Complete with snap ring (Mercedes)

from

$37.06

TIMING GUIDE RAIL

from

$208.90

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$4.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$1.29

Valve Adjust Nut

from

$6.44

Rocker Shaft Nut

from

$59.37

Original Equipment brand intake and exhaust valves is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OE Quality
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$13.51

Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features: