1988 Pontiac LeMans Cooling and Climate Controls

Below you will find various in-demand Pontiac Cooling and Climate Controls, components and accessories for your 1988 LeMans. Advance Auto Parts has popular LeMans parts like Air Conditioning Parts, Blower Motor and Related Products, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other LeMans model years including 1978, 1979, 1980, 1981, 1989, 1990, 1991, 1992, 1993 and more. Select a category of 1988 Pontiac LeMans Cooling and Climate Controls below and start saving instantly.

Popular 1988 Pontiac LeMans Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Thermostats

Radiator Fan Motors

AC Compressor Relays

Coolant Temperature Sensors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

AC Line O-Rings

Radiator Fan Control Relays

Blower Motor Wheels

AC Relay Connectors

Heater Valves

AC Compressor Cut-Out Relay Harness Connectors

Accumulator and Receiver Driers

AC Clutch Bearings

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Switch Connectors

AC Compressor Pressure Switches

AC Compressor Switch Connectors

AC Compressor Clutch Connectors

Coolant Temp Sending Unit Switch Connectors

Radiator Fan Switches

Blower Switches

AC Compressor Gaskets

Water Pump O-Rings

AC Compressor Thrust Bearings

AC Compressor Seals

AC Low Pressure Side Switches

HVAC Temperature Delay Relay Harness Connectors

HVAC Blower Motor Relay Connector

Essential Cooling and Climate Controls for 1988 Pontiac LeMans

from

$1.55

Water Pump Gasket

from

$15.79

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$29.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$18.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$22.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$569.99

27 in. Electric Fan

from

$4.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$60.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$319.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$17.29

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$9.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$9.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$1.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$54.99

BEARING

from

$26.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$9.29

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$59.99

GM Genuine Parts HVAC Pressure Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These HVAC pressure switches are a system protective switch that cuts off power to A/C components if the pressure in the system is too low. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Protective switch that discontinues power to A/C components when system pressures are too low
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$20.79

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$28.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$17.99

Fan motor no longer working properly? This blower motor resistor connector is designed to replace an original equipment connector damaged by corrosion or overheating. Corrosion-resistant terminals ensure reliable performance.

Product Features:

Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application.
Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness

from

$17.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.79

ACDelco Professional A/C Orifice Tube is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket tube is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

Upgrade your 1988 Pontiac LeMans with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1988 Pontiac LeMans, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Cooling and Climate Controls are key to keeping your LeMans functioning at its best. At Advance Auto Parts, we offer a wide selection of 85 Cooling and Climate Controls for the 1988 Pontiac LeMans, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1988 Pontiac LeMans at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.50 to $144.99, with an average price of $28.91. Our 85 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 1988 Pontiac LeMans without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Pontiac LeMans, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $2.99, and at an average 4 stars rating. With 2,912 customer reviews and counting, our 1988 Pontiac LeMans Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Pontiac LeMans is always ready to roll. We’re committed to providing you with everything you need to keep your LeMans in top shape, all in one place. Start shopping confidently below for your 1988 Pontiac LeMans!

Best-Selling Air Conditioning Parts for 1988 Pontiac LeMans

Enhance the driving experience in your Pontiac with 41 quality Air Conditioning Part components, starting at $1.99.

show more show less

from

$24.79

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$15.79

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$34.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$54.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$34.49

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$5.79

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$2.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$15.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$31.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$22.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$19.99

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$19.49

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$27.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$9.29

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$43.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$5.29

Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications

from

$105.26

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.

from

$16.79

Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.

from

$54.99

BEARING

from

$36.49

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$32.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$32.49

from

$30.99

from

$21.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$20.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$20.79

from

$15.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$11.79

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$7.95

A/C Orifice Tube

Most Popular 1988 Pontiac LeMans Blower Motor and Related Products

Customize your Pontiac with 10 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and Blower Motor Resistor Connectors, all priced under $49.99.

show more show less

from

$32.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$49.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$19.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$29.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Galvanized steel construction
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$17.79

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$10.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.29

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$31.49

from

$17.99

Ideal replacement – this complete blower motor resistor connector assembly is a direct replacement for this vehicle application.
Damage-resistant – the connector assembly is engineered to impede corrosion and heat damage
Complete repair solution – includes pre-assembled wiring harness/pigtail and connector terminal
Excellent value – this part offers original equipment quality without the cost and hassle of replacing the entire wiring harness

Top Picks for 1988 Pontiac LeMans Engine Cooling Parts

Upgrade Pontiac LeMans with top-quality Engine Cooling Parts parts, including 32 OEM and aftermarket selections for your 1988 model.

show more show less

from

$34.99

ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$50.99

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$2.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$67.99

Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan

from

$8.29

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$20.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$38.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$7.79

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$33.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.79

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$43.47

The ACDelco Professional Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$7.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$144.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$10.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$4.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$59.99

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$38.99

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$34.99

from

$23.99

Allows you to test the cooling system and your radiator pressure cap

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$5.29

Premium quality materials for longer service life
Designed for the OE distributor as a direct replacement part

from

$1.55

Water Pump Gasket

from

$1.50

Thermostat Gasket

In-Demand Heating Parts for 1988 Pontiac LeMans

Select from 2 premium Heating Parts parts for your 1988 Pontiac LeMans, with prices ranging from $15.99 to $60.99.

show more show less

from

$15.99

Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.

from

$60.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Top-Rated Cooling and Climate Controls Brands For Your 1988 Pontiac LeMans

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1988 Pontiac LeMans. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1988 LeMans start at just $2.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1988 Pontiac LeMans Cooling and Climate Controls

When it comes to maintaining or upgrading your 1988 Pontiac LeMans, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1988 Pontiac LeMans. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 1988 Pontiac LeMans Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1988 Pontiac LeMans owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1988 LeMans, Advance Auto Parts carries a full inventory of 43 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $2.99 to $144.99, plus, with more than 251 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$19.99

This product is not rated

Multi Purpose Relay

“”

from
$28.49

This product is not rated

Brake Pressure Modulator Sensor Connector

“”

from
$20.99

This product is not rated

Coolant Temperature Sensor

“”

FAQs for 1988 Pontiac LeMans Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1988 Pontiac LeMans?

Out of 85 Cooling and Climate Controls that fit 1988 Pontiac LeMans, the following parts are the top sellers:

Coolant Temperature Sensor (12422847) – $20.99
Adjustable Thermostatic Fan Control (6016936) – $22.99
Electric Fan – 12" Diameter (6016901) – $94.99

What’s the price range for 1988 Pontiac LeMans Cooling and Climate Controls?

Cooling and Climate Control prices for the 1988 Pontiac LeMans start at $1.50 and go up to $144.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1988 Pontiac LeMans?

The average price for Cooling and Climate Controls for the 1988 Pontiac LeMans is $28.91. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Pontiac LeMans model years?

Yes, we currently carry Cooling and Climate Controls for 24 model years of Pontiac LeMans between 1963 and 1993. Cooling and Climate Controls are bought most frequently for the following model years: 1993, 1992, 1991, 1990, 1989, 1981, 1980, 1979, and 1978.

What are the cheapest Cooling and Climate Controls for my 1988 Pontiac LeMans?

The cheapest 1988 Pontiac LeMans Cooling and Climate Controls we carry in stock are:

Thermostat Gasket (12073938) – $1.50
Water Pump Gasket (10791936) – $1.55
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890821) – $1.99
Engine Water Pump Gasket (3211711) – $2.49

What are the top-rated Cooling and Climate Controls that fit the 1988 Pontiac LeMans?

Out of 2,912 reviews by customers, our 1988 Pontiac LeMans Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1988 Pontiac LeMans and their top-rated products:

Engine Cooling Parts
- Engine Coolant Temperature Sensor (11680429) – $34.99
- Drain Cock-Brass-Screw In Style-1/8 In. NPT (5013119) – $2.99
- Engine Coolant Temperature Sensor (25987674) – $50.99
Blower Motor and Related Products
- Engine Coolant Temperature Sensor (11680429) – $34.99
- Drain Cock-Brass-Screw In Style-1/8 In. NPT (5013119) – $2.99
- Engine Coolant Temperature Sensor (25987674) – $50.99
Air Conditioning Parts
- Engine Coolant Temperature Sensor (11680429) – $34.99
- Drain Cock-Brass-Screw In Style-1/8 In. NPT (5013119) – $2.99
- Engine Coolant Temperature Sensor (25987674) – $50.99

What types of Cooling and Climate Controls do you sell for my 1988 Pontiac LeMans?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1988 Pontiac LeMans:

Can I get help with 1988 Pontiac LeMans Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Cooling and Climate Controls and more.

What is your return policy for Pontiac LeMans Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Pontiac LeMans Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Pontiac LeMans Cooling and Climate Controls

Febi – Water Pump Gasket (Part No.G3059310224FEB)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1107)

Carquest Premium – Blower Motor: Without Wheel (Part No.35587)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35601)

Driveworks – Ball Bearing (Part No.S-907257)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Flex A Lite – 27 in. Electric Fan (Part No.295)

Carquest Premium – HVAC Power Servo Connector (Part No.PTA1912)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3069)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433165)

Carquest Premium – Multi Purpose Relay (Part No.FCA1004)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Factory Air – Harness Connector (Part No.37211)

Carquest Premium – A/C Accumulator Tube (Part No.T34206)

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13356)

Felpro – Engine Water Pump Gasket (Part No.13243)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

FAG US – BEARING (Part No.5908-VAW)

Factory Air – System Mounted Low Cut-Out Pressure Switch (Part No.35757)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26730)

GM Genuine Parts – Air Conditioning Refrigerant Pressure Switch (Part No.15-50812)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1256)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – Brake Pressure Modulator Sensor Connector (Part No.PTA1017)

Dorman – Blower Motor Resistor Harness (Part No.645-709)

Carquest Premium – A/C Compressor Switch Connector (Part No.PTA1329)

ACDelco – Air Conditioning Orifice Tube (Part No.15-5754)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36674)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35756)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35961)

Factory Air – System Mounted Cycling Pressure Switch (Part No.35751)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35970)

Carquest Premium – A/C Universal Accumulator / Swivel Top (Part No.T33705)

Carquest Premium – A/C Accumulator (Part No.T33185)

ACDelco – Air Conditioning Orifice Tube (Part No.15-5754)

Carquest Premium – A/C White Orifice Tube (Part No.T38623)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Factory Air – Compressor Mounted High Cut-Out Pressure Switch (Part No.35974)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Driveworks – Ball Bearing (Part No.S-907257)

Carquest – Multi Purpose Relay (Part No.83A1001)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Dorman – 5-Wire Style Relay (Part No.85170)

Carquest Premium – Brake Pressure Modulator Sensor Connector (Part No.PTA1017)

Carquest Premium – Multi Purpose Relay (Part No.RAA1779)

Factory Air – Green Round O-Ring (Part No.24650)

Carquest – A/C Compressor Clutch Cut-Off Relay (Part No.R3212)

Factory Air – Green Round O-Ring (Part No.24615)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26730)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

National – Bearings (Part No.907257)

Factory Air – Harness Connector (Part No.37211)

Factory Air – Sealing Washer Kit (Part No.24338)

ACDelco – A/C Pressure Switch (Part No.R1054321623ACD)

Carquest Premium – A/C Harness Connector (Part No.T37201)

FAG US – BEARING (Part No.5908-VAW)

Carquest Premium – AC Pressure Switch (Part No.ACA1251)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1334)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1264)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1257)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1253)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1315)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1256)

Carquest Premium – A/C Compressor Cut-Out Relay Connector (Part No.PTA1292)

Carquest Premium – A/C Clutch Cycle Switch (Part No.ACA1259)

Behr – A/C Orifice Tube (Part No.R1027201455BEH)

Carquest Premium – Blower Motor: With Wheel (Part No.35333)

Carquest Premium – Blower Motor: With Wheel (Part No.35345)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35603)

Carquest Premium – Blower Motor: Without Wheel (Part No.35588)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35602)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1061)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1284)

Carquest Premium – A/C Compressor Clutch Relay Connector (Part No.PTA1269)

Carquest Premium – HVAC Blower Control Switch (Part No.BLA1152)

Dorman – Blower Motor Resistor Harness (Part No.645-709)