1988 Plymouth Reliant Exhaust Parts
More 1988 Plymouth Reliant Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1988 Plymouth Reliant, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1988 Plymouth Reliant Exhaust Parts
Walker – Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31362)
from
$16.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.60632)
from
$10.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18285)
from
$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18449)
from
$69.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Extension Pipe Aluminized 24.5" (Part No.43130)
from
$20.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Extension Pipe Aluminized 24.875" (Part No.43813)
from
$20.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust 35574 Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker® accessories help to ensure effective exhaust repairs
Walker – Exhaust 35114 Exhaust System Hanger Insulator (Part No.35114)
from
$7.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 1.875 (Part No.35344)
from
$2.79
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 35031 Exhaust Bolt and Spring (Part No.35031)
from
$19.49
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION — Designed to be used for ball and socket joint
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.337004)
from
$295.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 337004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53004)
from
$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94024)
from
$130.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94024 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94204)
from
$172.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Tail Pipe Aluminized 9.5" (Part No.41422)
from
$17.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dorman – Help – Manifold Bolt and Spring Kit – M8-1.25 x 76mm (Part No.03143)
from
$14.29
Designed for an exact fit, our Exhaust Bolt & Spring. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Rust and corrosion resistant
- Durable hardened and spring steel construction
- New hardware helps fix exhaust leaks
- Also available separately (where applicable)
Dorman – Help – Manifold Bolt and Spring Kit – M8-1.25 x 74mm (Part No.03128)
from
$12.49
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- New hardware helps fix exhaust leaks
- Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
- Also available separately (where applicable)
- Hardened steel construction for long-lasting durability
Walker – Exhaust 22281 Exhaust Resonator (Part No.22281)
from
$53.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound
- FLEXIBLE SOLUTION — Customizable design for easy fitment and may require specialized fabrication and/or welding for installation
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR — Engineered to fit, perform and sound like the original system
Popular 1988 Plymouth Reliant Exhaust Parts Categories
1988 Plymouth Reliant Exhaust Parts
You count on your 1988 Plymouth Reliant to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 24 Exhaust Parts ranging in price from $1.99 to $512.99, you’re sure to find everything you need for your 1988 Plymouth Reliant.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 5 different brands like Walker, Dorman, and Felpro. 1988 Plymouth Reliant Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 55 extensive product reviews on 1988 Plymouth Reliant Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are SoundFX Muffler, Direct Replacement, No Fabrication Needed with 2.7 stars and Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1988 Plymouth Reliant below to get started!
Top-Rated Exhaust Parts Brands For Your 1988 Plymouth Reliant
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Plymouth Reliant running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular Dorman – Help Exhaust Parts
You’ll find popular Dorman – Help brand products across Exhaust System Kits. All are waiting to get your 1988 Plymouth Reliant back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1988 Plymouth Reliant, and some of our most reviewed Walker parts include:
from
$16.99
(8)
Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1988 Plymouth Reliant Exhaust Parts
What are the most purchased Exhaust Parts for the 1988 Plymouth Reliant?
Out of 24 Exhaust Parts for the 1988 Plymouth Reliant, the most popular in our inventory are:
What are the top-rated 1988 Plymouth Reliant Exhaust Parts?
Top-rated Exhaust Parts for your 1988 Plymouth Reliant based on customer reviews/ratings are:
from
$90.99
(3)
SoundFX Muffler, Direct Replacement, No Fabrication Needed
“Direct fit for this model that reqiures a minimal instalation job. Looks great with the aluminum finish.”
from
$178.99
(1)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“had it installed by professional”
