1988 Oldsmobile Cutlass Calais Transmission Parts
Find Your Specific 1988 Oldsmobile Cutlass Calais Transmission Parts
Below you will find various in-demand Oldsmobile Transmission Parts, components and accessories for your 1988 Cutlass Calais. Advance Auto Parts has popular Cutlass Calais parts like Automatic Transmission Parts, Transmission Seals, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other Cutlass Calais model years including
1979,
1980,
1981,
1982,
1983,
1984,
1989,
1990,
1991 and more. Select a category of 1988 Oldsmobile Cutlass Calais Transmission Parts below and start saving instantly.
Popular 1988 Oldsmobile Cutlass Calais Transmission Parts Categories
Essential Transmission Parts for 1988 Oldsmobile Cutlass Calais
National – Multi-Purpose Seal (Part No.3543)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
- Good dry heat resistance
- Excellent low temperature capability
- Delivers quality and reliable performance for every type of repair
GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT364)
from
$32.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBC4935)
from
$48.99
An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Precision-wound coated copper windings increase product durability and life cycle.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2392)
from
$6.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 77-82; CHEV 78-05; GMC 81-99; OLDS 78-83; PONT 75-93;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-2005
- Weight approx: 1 Lbs
- HEIGHT: 1.95 INCH / 49.53 MM WITHOUT STUD
- STUD AND BOLT HOLES INLINE
- STUD: M10-1.50
- MOUNT HOLES: 3.75 INCH / 95.25 MM
ATP – ATP Automatic Transmission Shifter Cable (Part No.Y-403)
from
$79.99
Transhift cables connect the transmission selector lever/shifter to the transmission linkage. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Transhift cables are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Includes brackets, grommets, etc to match original
- Installs just like the original part
Felpro – Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (Part No.TOS 18656)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
FAG US – Shaft Seal (Part No.SS2114)
from
$7.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$899.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
ATP – AT DETENT CABLE SEAL (Part No.SO-37)
from
$3.99
AT DETENT CABLE SEAL
Anchor – Torque Strut Motor Mount: Rear, Front, 1 Piece (Part No.2528)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 82-91; CADI 82-88; CHEV 82-94; OLDS 82-91; PONT 82-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
National – Bearing (Part No.JL69349)
from
$16.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
GM Genuine Parts – 4-Way Male Black Multi-Purpose Pigtail (Part No.PT127)
from
$46.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ATP – AT MASTER REPAIR KIT (Part No.XM-5)
from
$207.99
AT MASTER REPAIR KIT
Dorman – EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (Part No.092-018)
from
$17.49
Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.
Product Features:
See More
Product Features:
- Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
- Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
- Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
- Corrosion resistant – specially coated to avoid rust for a long service life
National – Multi-Purpose Seal (Part No.4072N)
from
$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Dorman – Transmission Line Connector (Part No.800-755)
from
$12.99
Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.
Product Features:
See More
Product Features:
- Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
- Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
- Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
ATP – ATP Automatic Transmission Detent Cable (Part No.Y-233)
from
$22.99
Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Includes brackets, grommets, etc to match original
- Helps transmission determine ideal downshift
- Improves vehicle performance
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Dorman – Clutch Pilot Bushing (Part No.690-014.1)
from
$7.29
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)
from
$2.99
Product Features:
See More
- ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts
Driveworks – Oil Seal (Part No.S-4072N)
from
$5.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Set (Part No.S-A-18)
from
$12.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT CONTR SOLENOID (Part No.CE-4)
from
$54.99
AT CONTR SOLENOID
National – Multi-Purpose Bearing (Part No.A-18)
from
$17.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Multi-Use Connector (Part No.PTA2558)
from
$32.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Multi-Use Connector (Part No.PTA2424)
from
$34.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Upgrade your 1988 Oldsmobile Cutlass Calais with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 1988 Oldsmobile Cutlass Calais, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Transmission Parts are key to keeping your Cutlass Calais functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Transmission Parts for the 1988 Oldsmobile Cutlass Calais, designed to meet your needs without breaking the bank.
From
Automatic Transmission Part
replacements to
Transmission Seals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1988 Oldsmobile Cutlass Calais at great prices.
Our Transmission Parts inventory for this model
ranges from just $2.99 to $631.99, with
an average price of $77.90.
Our 45 Transmission Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1988 Oldsmobile Cutlass Calais without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Oldsmobile Cutlass Calais, we stock popular OEM and aftermarket Transmission Parts from top names
like National, DriveWorks, Imperial, and more.
National Transmission Parts
start at just $9.99 and boast an impressive 4.3 stars average rating from customers.
DriveWorks and Imperial also bring quality to the table, with Transmission Parts available starting at $5.99, and at an average 4.3 stars rating.
With 1,703 customer reviews and counting, our 1988 Oldsmobile Cutlass Calais Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1988 Oldsmobile Cutlass Calais is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Calais in top shape, all in one place.
Start shopping confidently below for your 1988 Oldsmobile Cutlass Calais!
Best-Selling Automatic Transmission Parts for 1988 Oldsmobile Cutlass Calais
Enhance the driving experience in your Oldsmobile with 4 quality Automatic Transmission Part components, starting at $7.99.
ATP – Automatic Transmission Detent Cable End (Part No.YR-100)
from
$7.99
ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.
Product Features:
See More
Product Features:
- Saves money by allowing cable repair instead of replacement.
- Easy to use
Pro-King – Automatic Transmission Solenoid (Part No.52-0210)
from
$34.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.
Product Features:
See More
Product Features:
- Quick Link Connector
- Anti-Clogging Design
Dorman – Help – Brake and Clutch Bushings (Part No.74016)
from
$10.99
This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – AT CONTR SOLENOID (Part No.CE-4)
from
$54.99
AT CONTR SOLENOID
Most Popular 1988 Oldsmobile Cutlass Calais Transmission Seals
Customize your Oldsmobile with 6 Transmission Seals products
like Transmission Seals and O-rings,
Automatic Transmission Oil Pump Seals, and
Miscellaneous Shift Shaft Seals, all
priced under $9.99.
National – Multi-Purpose Seal (Part No.3543)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
- Good dry heat resistance
- Excellent low temperature capability
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
Product Features:
See More
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
ATP – AT DETENT CABLE SEAL (Part No.SO-37)
from
$3.99
AT DETENT CABLE SEAL
ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)
from
$2.99
Product Features:
See More
- ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts
National – Multi-Purpose Seal (Part No.4072N)
from
$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
FAG US – Shaft Seal (Part No.SS2114)
from
$7.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Top Picks for 1988 Oldsmobile Cutlass Calais Transmission Bearings
Upgrade Oldsmobile Cutlass Calais with top-quality Transmission Bearings parts, including 5 OEM and aftermarket selections for your 1988 model.
Driveworks – Taper Bearing Set (Part No.S-A-18)
from
$12.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.A-18)
from
$17.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)
National – Bearing (Part No.JL69349)
from
$16.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.305-DD)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
In-Demand Transmission Cooler and Parts for 1988 Oldsmobile Cutlass Calais
Select from 10 premium Transmission Cooler and Parts parts for your 1988 Oldsmobile Cutlass Calais, with prices ranging from $25.99 to $85.99.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
Product Features:
See More
- Imperial Maxi-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)
from
$61.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)
from
$55.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)
from
$40.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)
from
$80.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)
from
$52.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$83.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- Up to Class C motorhomes, towing up to 5,000 pounds
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Most Sold 1988 Oldsmobile Cutlass Calais Transmission Mounts
Explore our best-selling Oldsmobile parts for the 1988 Cutlass Calais among 4 OEM and aftermarket options starting from $8.99.
Anchor – Transmission Mount: Left, 1 Piece (Part No.2766)
from
$19.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 90-91; OLDS 87-91; PONT 89-91;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1987-1991
- Weight approx: 2 Lbs
- INSERT ONLY
Anchor – Transmission Mount: Left, 1 Piece (Part No.2601)
from
$18.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 85-91; CADI 85-88; CHEV 85-94; OLDS 83-91; PONT 85-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1983-1994
- Weight approx: 5 Lbs
- COMPLETE MOUNT
Anchor – Torque Strut Motor Mount: Rear, Front, 1 Piece (Part No.2528)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 82-91; CADI 82-88; CHEV 82-94; OLDS 82-91; PONT 82-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1982-1994
- Weight approx: 2 Lbs
Anchor – Transmission Mount: Left, 1 Piece (Part No.3058)
from
$26.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 88-91; OLDS 88-91; PONT 89-91;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-1991
- Weight approx: 2 Lbs
- INSERT ONLY
Top-Rated Transmission Parts Brands For Your 1988 Oldsmobile Cutlass Calais
Shop for the best-rated brands offering Transmission Parts and other products for your 1988 Oldsmobile Cutlass Calais. Below you’ll find some of our best rated Transmission Parts from National, DriveWorks, and Imperial, and more. Transmission Parts from these brands that fit a 1988 Cutlass Calais start at just $5.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1988 Oldsmobile Cutlass Calais Transmission Parts
When it comes to maintaining or upgrading your 1988 Oldsmobile Cutlass Calais, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1988 Oldsmobile Cutlass Calais. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $23.99. Plus, with over 54 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$43.99
(2)
Shaft Repair Sleeve
“As a mechanic I dont have time or money to waste on inferior products, which this is not.
Great product,great price”
Popular DriveWorks 1988 Oldsmobile Cutlass Calais Transmission Parts
DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 1988 Oldsmobile Cutlass Calais owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1988 Cutlass Calais, Advance Auto Parts carries a full inventory of 2 DriveWorks Transmission Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $5.99 to $12.99, plus, with more than 35 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
FAQs for 1988 Oldsmobile Cutlass Calais Transmission Parts
Which Transmission Parts are best-sellers for 1988 Oldsmobile Cutlass Calais?
Out of 45 Transmission Parts that fit 1988 Oldsmobile Cutlass Calais, the following parts are the top sellers:
- Multi-Purpose Bearing (3275787) – $17.99
- Multi-Purpose Seal (18443030) – $9.99
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49
What’s the price range for 1988 Oldsmobile Cutlass Calais Transmission Parts?
Transmission Part prices for the 1988 Oldsmobile Cutlass Calais start at $2.99 and go up to $631.99 for the most premium parts.
What’s the average price of a Transmission Part for a 1988 Oldsmobile Cutlass Calais?
The average price for Transmission Parts for the 1988 Oldsmobile Cutlass Calais is $77.90. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Oldsmobile Cutlass Calais model years?
What are the cheapest Transmission Parts for my 1988 Oldsmobile Cutlass Calais?
The cheapest 1988 Oldsmobile Cutlass Calais Transmission Parts we carry in stock are:
- Automatic Transmission Speedometer Pinion Seal (11236107) – $2.99
- AT DETENT CABLE SEAL (10861026) – $3.99
- Oil Seal (5442583) – $5.99
- Multi Purpose Seal (3271471) – $6.99
- Multi-Purpose Seal (3268551) – $7.49
What are the top-rated Transmission Parts that fit the 1988 Oldsmobile Cutlass Calais?
Out of 1,703 reviews by customers, our 1988 Oldsmobile Cutlass Calais Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1988 Oldsmobile Cutlass Calais and their top-rated products:
- Transmission Cooler and Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Automatic Transmission Pan and Gaskets
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Transmission Connectors
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
What types of Transmission Parts do you sell for my 1988 Oldsmobile Cutlass Calais?
As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1988 Oldsmobile Cutlass Calais:
Can I get help with 1988 Oldsmobile Cutlass Calais Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Transmission Parts and more.
What is your return policy for Oldsmobile Cutlass Calais Transmission Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Calais Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
