1991 Oldsmobile Cutlass Calais Transmission Parts

Below you will find various in-demand Oldsmobile Transmission Parts, components and accessories for your 1991 Cutlass Calais. Advance Auto Parts has popular Cutlass Calais parts like Transmission Bearings, Automatic Transmission Parts, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Cutlass Calais model years including 1979, 1980, 1981, 1982, 1983, 1984, 1988, 1989, 1990 and more. Select a category of 1991 Oldsmobile Cutlass Calais Transmission Parts below and start saving instantly.

Popular 1991 Oldsmobile Cutlass Calais Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Torque Strut Mounts

Transmission Solenoids

Transmission Oil Cooler Lines

Manual Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Master Repair Kits

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Bushings

Axle Intermediate Shaft Seals

Detent Cables

Automatic Transmission Oil Pump Seals

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Torque Converter Seals

Automatic Transmission Torque Converter Clutch Valve Solenoid Connectors

Back Up Lamp Connectors

Automatic Transmission Output Shaft Bearings

Automatic Transmission Detent Cable Seals

Automatic Transmission Torque Converter Connectors

Vehicle Power Control Module Connector

Automatic Transmission Speedometer Pinion Seals

Automatic Transmission Torque Conv. Clutch Solenoid Connector

Essential Transmission Parts for 1991 Oldsmobile Cutlass Calais

from

$25.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$26.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 88-91; OLDS 88-91; PONT 89-91;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1988-1991
Weight approx: 2 Lbs
INSERT ONLY

from

$12.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.49

Product Features:

Brand may vary by location

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$77.99

Vehicle Speed Sensor

from

$7.29

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$3.99

AT DETENT CABLE SEAL

from

$32.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

BUILT TO LAST — Advanced heat treatment process for strength
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$183.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$8.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 82-91; CADI 82-88; CHEV 82-94; OLDS 82-91; PONT 82-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-1994
Weight approx: 2 Lbs

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$37.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$12.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$31.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$141.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$48.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

AT SPEED PINION SEAL

Upgrade your 1991 Oldsmobile Cutlass Calais with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1991 Oldsmobile Cutlass Calais, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Transmission Parts are key to keeping your Cutlass Calais functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Transmission Parts for the 1991 Oldsmobile Cutlass Calais, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1991 Oldsmobile Cutlass Calais at great prices. Our Transmission Parts inventory for this model ranges from just $2.99 to $631.99, with an average price of $74.52. Our 52 Transmission Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1991 Oldsmobile Cutlass Calais without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Oldsmobile Cutlass Calais, we stock popular OEM and aftermarket Transmission Parts from top names like National, DriveWorks, Imperial, and more. National Transmission Parts start at just $9.99 and boast an impressive 4.3 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Transmission Parts available starting at $5.99, and at an average 4.3 stars rating. With 2,115 customer reviews and counting, our 1991 Oldsmobile Cutlass Calais Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Oldsmobile Cutlass Calais is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Calais in top shape, all in one place. Start shopping confidently below for your 1991 Oldsmobile Cutlass Calais!

Best-Selling Transmission Bearings for 1991 Oldsmobile Cutlass Calais

Enhance the driving experience in your Oldsmobile with 5 quality Transmission Bearing components, starting at $8.99.

show more show less

from

$12.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Product Features:

Brand may vary by location

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

BUILT TO LAST — Advanced heat treatment process for strength
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Most Popular 1991 Oldsmobile Cutlass Calais Automatic Transmission Parts

Customize your Oldsmobile with 5 Automatic Transmission Parts products like Transmission Solenoids, Transmission Bushings, and Detent Cables, all priced under $54.99.

show more show less

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Connector
Anti-Clogging Design

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

AT CONTR SOLENOID

Top Picks for 1991 Oldsmobile Cutlass Calais Transmission Cooler and Parts

Upgrade Oldsmobile Cutlass Calais with top-quality Transmission Cooler and Parts parts, including 10 OEM and aftermarket selections for your 1991 model.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

In-Demand Transmission Mounts for 1991 Oldsmobile Cutlass Calais

Select from 4 premium Transmission Mounts parts for your 1991 Oldsmobile Cutlass Calais, with prices ranging from $8.99 to $26.49.

show more show less

from

$19.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 90-91; OLDS 87-91; PONT 89-91;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1991
Weight approx: 2 Lbs
INSERT ONLY

from

$18.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 85-91; CADI 85-88; CHEV 85-94; OLDS 83-91; PONT 85-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1983-1994
Weight approx: 5 Lbs
COMPLETE MOUNT

from

$8.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-1994
Weight approx: 2 Lbs

from

$26.49

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1988-1991
Weight approx: 2 Lbs
INSERT ONLY

Most Sold 1991 Oldsmobile Cutlass Calais Transmission Seals

Explore our best-selling Oldsmobile parts for the 1991 Cutlass Calais among 7 OEM and aftermarket options starting from $2.99.

show more show less

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

AT DETENT CABLE SEAL

from

$2.99

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$7.49

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.49

Product Features:

Brand may vary by location

from

$7.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top-Rated Transmission Parts Brands For Your 1991 Oldsmobile Cutlass Calais

Shop for the best-rated brands offering Transmission Parts and other products for your 1991 Oldsmobile Cutlass Calais. Below you’ll find some of our best rated Transmission Parts from National, DriveWorks, and Imperial, and more. Transmission Parts from these brands that fit a 1991 Cutlass Calais start at just $5.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1991 Oldsmobile Cutlass Calais Transmission Parts

When it comes to maintaining or upgrading your 1991 Oldsmobile Cutlass Calais, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1991 Oldsmobile Cutlass Calais. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $23.99. Plus, with over 54 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $43.99

(2)

Shaft Repair Sleeve

“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”

from $17.99

(36)

Multi-Purpose Bearing

“High quality.”

from $9.99

(16)

Multi-Purpose Seal

“worked well”

Popular DriveWorks 1991 Oldsmobile Cutlass Calais Transmission Parts

DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 1991 Oldsmobile Cutlass Calais owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1991 Cutlass Calais, Advance Auto Parts carries a full inventory of 2 DriveWorks Transmission Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $5.99 to $12.99, plus, with more than 35 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $5.99

(2)

Oil Seal

“Needed to fix transmission seal leak”

from $12.99

(33)

Taper Bearing Set

“Nice folks !!!!!”

FAQs for 1991 Oldsmobile Cutlass Calais Transmission Parts

Which Transmission Parts are best-sellers for 1991 Oldsmobile Cutlass Calais?

Out of 52 Transmission Parts that fit 1991 Oldsmobile Cutlass Calais, the following parts are the top sellers:

Multi-Purpose Bearing (3275787) – $17.99
Multi-Purpose Seal (18443030) – $9.99
EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49

What’s the price range for 1991 Oldsmobile Cutlass Calais Transmission Parts?

Transmission Part prices for the 1991 Oldsmobile Cutlass Calais start at $2.99 and go up to $631.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1991 Oldsmobile Cutlass Calais?

The average price for Transmission Parts for the 1991 Oldsmobile Cutlass Calais is $74.52. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Oldsmobile Cutlass Calais model years?

Yes, we currently carry Transmission Parts for 9 model years of Oldsmobile Cutlass Calais between 1978 and 1990. Transmission Parts are bought most frequently for the following model years: 1990, 1989, 1988, 1984, 1983, 1982, 1981, 1980, and 1979.

What are the cheapest Transmission Parts for my 1991 Oldsmobile Cutlass Calais?

The cheapest 1991 Oldsmobile Cutlass Calais Transmission Parts we carry in stock are:

Automatic Transmission Speedometer Pinion Seal (11236107) – $2.99
AT DETENT CABLE SEAL (10861026) – $3.99
Oil Seal (5442583) – $5.99
Multi Purpose Seal (3271471) – $6.99
Multi-Purpose Seal (3268551) – $7.49

What are the top-rated Transmission Parts that fit the 1991 Oldsmobile Cutlass Calais?

Out of 2,115 reviews by customers, our 1991 Oldsmobile Cutlass Calais Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1991 Oldsmobile Cutlass Calais and their top-rated products:

Transmission Cooler and Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
Automatic Transmission Pan and Gaskets
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99

What types of Transmission Parts do you sell for my 1991 Oldsmobile Cutlass Calais?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1991 Oldsmobile Cutlass Calais:

Can I get help with 1991 Oldsmobile Cutlass Calais Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Transmission Parts and more.

What is your return policy for Oldsmobile Cutlass Calais Transmission Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Calais Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1991 Oldsmobile Cutlass Calais Transmission Parts

GM Genuine Parts – Multi-Purpose Pigtail Kit (Part No.PT3786)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3058)

Driveworks – Taper Bearing Set (Part No.S-A-18)

Driveworks – Wheel Seal (Part No.S-710479)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

National – Multi-Purpose Bearing (Part No.A-18)

Driveworks – Oil Seal (Part No.S-4072N)

ATP – Vehicle Speed Sensor (Part No.CE-11)

Dorman – Clutch Pilot Bushing (Part No.690-014.1)

Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8695)

ATP – AT DETENT CABLE SEAL (Part No.SO-36)

Carquest Premium – Multi-Use Connector (Part No.PTA2558)

National – Bearing (Part No.JL69349)

FAG US – Shaft Seal (Part No.SS2114)

National – Multi-Purpose Bearing (Part No.305-DD)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM18AL)

Anchor – Torque Strut Motor Mount: Rear, Front, 1 Piece (Part No.2528)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

GM Genuine Parts – 4-Way Male Black Multi-Purpose Pigtail (Part No.PT127)

National – Multi-Purpose Seal (Part No.4072N)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

GM Genuine Parts – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

Dorman – Transmission Line Connector (Part No.800-755)

GM Genuine Parts – 2-Way Female Natural Colored Multi-Purpose Pigtail (Part No.PT142)

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-838)

Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBC4935)

National – Multi Purpose Seal (Part No.8792S)

ATP – AT SPEED PINION SEAL (Part No.SO-34)

Driveworks – Taper Bearing Set (Part No.S-A-18)

National – Multi-Purpose Bearing (Part No.A-18)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

National – Bearing (Part No.JL69349)

National – Multi-Purpose Bearing (Part No.305-DD)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

Pro-King – Automatic Transmission Solenoid (Part No.52-0210)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

GM Genuine Parts – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

ATP – AT CONTR SOLENOID (Part No.CE-4)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Anchor – Transmission Mount: Left, 1 Piece (Part No.2766)

Anchor – Transmission Mount: Left, 1 Piece (Part No.2601)

Anchor – Torque Strut Motor Mount: Rear, Front, 1 Piece (Part No.2528)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3058)

National – Multi-Purpose Seal (Part No.3543)

National – Multi Purpose Seal (Part No.8792S)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

National – Multi-Purpose Seal (Part No.4072N)

Driveworks – Wheel Seal (Part No.S-710479)

FAG US – Shaft Seal (Part No.SS2114)