1988 Mitsubishi Tredia Suspension Parts
More 1988 Mitsubishi Tredia Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1988 Mitsubishi Tredia, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1988 Mitsubishi Tredia Suspension Parts
KYB – High Pressure Monotube Gas Shock (Part No.KG4192)
from
$60.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and con
Product Features:
See More
Product Features:
- Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- Components And Valving Designed Specifically For Your Vehicle
- Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5877)
from
$53.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Strut Bellows (Part No.K90462)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Boot Kit (Part No.63621)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Jounce Bumper and Bellows (Part No.SB103)
from
$29.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Driveworks – Strut Bellow (Part No.DW-K90462)
from
$6.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
ACDelco – Professional Shock Absorber Mount (Part No.L4010614643ACD)
from
$34.50
ACDelco Professional Shock Absorber Mount is the mechanical fastener that elastically connects the shock absorber to the vehicle components. When it comes to replacing your shocks, struts, and other suspension components, ACDelco offers a full line of Professional premium aftermarket suspension products. In addition to shocks and struts, we offer a variety of parts to make part replacement simple and precise. ACDelco Professional Suspension parts fit your GM vehicle, as well as a wide range of other vehicles on the road today.
Product Features:
See More
Product Features:
- High quality suspension component which further increases the safety and comfort of your vehicle
- Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly
- ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies
- Designed to fit with ACDelco shocks and struts for ease of installation and use
Popular 1988 Mitsubishi Tredia Suspension Parts Categories
1988 Mitsubishi Tredia Suspension Parts
You count on your 1988 Mitsubishi Tredia to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 7 Suspension Parts ranging in price from $6.99 to $60.99, you’re sure to find everything you need for your 1988 Mitsubishi Tredia.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 5 different brands like DriveWorks, KYB, and Moog. 1988 Mitsubishi Tredia Suspension Parts start as low as $6.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 46 extensive product reviews on 1988 Mitsubishi Tredia Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1988 Mitsubishi Tredia below to get started!
Top-Rated Suspension Parts Brands For Your 1988 Mitsubishi Tredia
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Mitsubishi Tredia running right for years to come. In our inventory you’ll find brands like DriveWorks, KYB, Moog, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Shocks and Struts. All are waiting to get your 1988 Mitsubishi Tredia back on the road. Some of the top-rated Monroe products in these categories are:
Top-Rated Suspension Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Suspension Parts for your 1988 Mitsubishi Tredia, and some of our most reviewed parts include:
FAQs for 1988 Mitsubishi Tredia Suspension Parts
What are the most purchased Suspension Parts for the 1988 Mitsubishi Tredia?
Out of 7 Suspension Parts for the 1988 Mitsubishi Tredia, the most popular in our inventory are:
