1988 Mitsubishi Galant Engine Cooling Parts

Essential 1988 Mitsubishi Galant Engine Cooling Parts

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Engine Cooling Fan Switch (Part No.ACA1629)

Engine Cooling Fan Switch

from

$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0097)

Engine Coolant Temperature Sensor

from

$24.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35336)

Engine Coolant Outlet Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

FAE – Water Temperature Sender (Part No.P403629916FAE)

Water Temperature Sender

from

$22.99
Water Temperature Sender

Motorad UltraStats – Thermostat: 192 Degrees (Part No.5240-192)

Thermostat: 192 Degrees

from

$13.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:
  • Heavy gauge stainless steel components offer increased reliability and long-lasting durability
  • Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
  • Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
  • AccuSpring Design for stable temperature control and increased cabin comfort
See More

Beck/Arnley – Thermostat, 192 Degrees Fahrenheit (Part No.143-0804)

Thermostat, 192 Degrees Fahrenheit

from

$34.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
  • Constructed with premium materials for durability
  • Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
  • Application specific for this vehicle
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.E1878)

Engine Coolant Temperature Sensor

from

$19.99
ACDelco Professional Engine Coolant Temperature Sender is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sender is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1066)

Temperature Sender With Gauge

from

$15.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Autopart International Inc – Radiator (Part No.G10002012531API)

Radiator

from

$159.67
Radiator

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431494)

Radiator: With Transmission Oil Cooler

from

$139.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Radiator Cap Tester Adapter

from

$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Radiator Cap Tester Adapter

from

$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10327)

Radiator Cap: 13 PSI

from

$18.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Sankei Switches Radiator Cap

from

$11.27
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
See More

Beck/Arnley – Water Pump Gasket (Part No.039-4137)

Water Pump Gasket

from

$5.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Metal where applicable
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Felpro – Engine Water Pump Gasket (Part No.35737)

Engine Water Pump Gasket

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

NPW – NPW Water Pump (Part No.G3000118717NPW)

NPW Water Pump

from

$65.46
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced impeller design.
  • Quality cast housing.
  • Precision bearings.
  • Resistant to corrosion.
  • Unitized bearing assembly.
See More

GMB – Water Pump (Part No.G300083923GMB)

Water Pump

from

$83.87
The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High flow design
  • Factory lubricated bearing assembly
  • Precision ground shaft and hub
  • OE quality forged housing for maximum coolant flow
  • Precision built and balanced
  • Pressed on impeller for increased water flow
  • Unique no sealed required gasket
  • Unitized seal protects bearings and provides long life leak free performance.
  • Factory sealed precision ground one piece bearing assembly
See More

Imperial – 16" Electric Fan (Part No.226216)

16" Electric Fan

from

$115.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Thin-line electric fan
  • 16″ diameter
  • 1,400 CFM
  • Use as a pusher or puller fan
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-332)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$191.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Beck/Arnley – Thermostat Gasket (Part No.039-0006)

Thermostat Gasket

from

$1.79
Rubber- or graphite-impregnated for extreme temperature resistance. Wire-reinforced for radial strength. Microsealing provides a positive seal.
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35959)

Engine Coolant Outlet Gasket

from

$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

1988 Mitsubishi Galant Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1988 Mitsubishi Galant. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 39 different Engine Cooling Parts in our inventory ranging from $1.79 to $153.99. That means you can find the exact parts or products you need to keep that 1988 Mitsubishi Galant running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Mitsubishi Galant. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1988 Mitsubishi Galant, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 698 reviews in this category, some of the top rated parts include Electric Fan 16" Diameter with 4.1 stars and Adjustable Thermostatic Fan Control with 3.4 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1988 Mitsubishi Galant rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1988 Mitsubishi Galant Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Mitsubishi Galant demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Galant the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular ACDelco Engine Cooling Parts

We carry ACDelco parts in our stock across Temperature Switch and Senders categories, plus more. For a 1988 Mitsubishi Galant, our most popular ACDelco Engine Cooling Parts include:
Engine Coolant Temperature Sensor
from $19.99
(1)
Engine Coolant Temperature Sensor
Temperature Switch and Senders

FAQs for 1988 Mitsubishi Galant Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1988 Mitsubishi Galant?

Out of 39 Engine Cooling Parts for the 1988 Mitsubishi Galant, the most popular in our inventory are:
Radiator Cap: 13 PSI
from $11.99
(193)
Radiator Cap: 13 PSI
Radiator Caps
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
Radiator Fan Motors

What are the top-rated 1988 Mitsubishi Galant Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1988 Mitsubishi Galant based on customer reviews/ratings are:
Electric Fan 16" Diameter
from $92.99
(34)
Electric Fan 16" Diameter
“Awesome”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”
Radiator Cap: 13 PSI
from $18.79
(21)
Radiator Cap: 13 PSI
“great price, easy install”