1988 Mercury Tracer Filters and PCVs

Essential Filters and PCVs for 1988 Mercury Tracers

Purolator – Fuel Filter (Part No.F64621)

Fuel Filter

from

$19.99
A clogged fuel filter could lead to contaminants in the engine fluid ¿ a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance. Removes water from the fuel system. Prevents rust and corrosion in your engine. Keeps fuel contaminant free. Replace annually for peak performance. Meets or exceeds OE specifications

Product Features:
  • Removes water from the fuel system
  • Prevents rust and corrosion in your engine
  • Keeps fuel contaminant free
  • Replace annually for peak performance
  • Meets or exceeds OE specifications
See More

Motorcraft – Original Equipment Fuel Filter (Part No.FG-862)

Original Equipment Fuel Filter

from

$15.99
Helps prevent stalling, poor starting and potential engine failure. Improves vehicle performance by ensuring a uniform fuel flow. Blocks impurities and contaminants in your fuel or gas tank before they can enter your engine or clog your injectors.

Product Features:
  • Removes 90% of particles 20 microns or larger
  • Connector and support washers are brazed for enhanced durability and strength
  • 300-series stainless steel case provides excellent corrosion resistance
See More

Motorcraft – Original Equipment Fuel Filter (Part No.FG-800A)

Original Equipment Fuel Filter

from

$16.99
Helps prevent stalling, poor starting and potential engine failure. Improves vehicle performance by ensuring a uniform fuel flow. Blocks impurities and contaminants in your fuel or gas tank before they can enter your engine or clog your injectors.

Product Features:
  • Removes 90% of particles 20 microns or larger
  • Connector and support washers are brazed for enhanced durability and strength
  • 300-series stainless steel case provides excellent corrosion resistance
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1179)

PCV Valve Grommet

from

$5.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – PCV Grommet (Part No.B2140197177DOR)

PCV Grommet

from

$7.68
Provide an airtight seal for the PCV valve with Dorman’s resilient PCV Grommet. Made from oil-resistant rubber, the grommet is durable against severe heat and fluctuating under hood temperatures. Its bevelled design helps ensure a secure fit. It is excellent for the repair of emission and vacuum systems on cars, trucks and tractors.

Product Features:
  • Leak-resistant for maximum performance
  • Crack-resistant for long-lasting use
  • Easy to install – just press it into place
  • No special tools required for installation
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1286)

PCV Valve Grommet

from

$1.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Aluminum Drain Plug Gasket, Fits M14 (Part No.095-147.1)

Aluminum Drain Plug Gasket, Fits M14

from

$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Oil Drain Plug Gasket – Aluminum Fits M14 (sold by each) (Part No.095-147)

Oil Drain Plug Gasket - Aluminum Fits M14 (sold by each)

from

$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Metal/Rubber Drain Plug Gasket, Fits 1/2Do, 9/16, M14 (Part No.097-025.1)

Metal/Rubber Drain Plug Gasket, Fits 1/2Do, 9/16, M14

from

$3.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components.
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mobil 1 – Extended Performance Oil Filter (Part No.M1-209)

Extended Performance Oil Filter

from

$14.99
The Mobil1 Extended Performance Oil Filter utilizes synthetic fibers to leave your vehicle with cleaner oil and an engine that performs better and lasts longer. When used with Mobil 1 fully synthetic motor oil, this filter offers dependable protection for your engine.

Product Features:
  • Designed for today’s longer service intervals.
  • Advanced synthetic fiber-blend filter media for enhanced contaminant removal.
  • High-capacity design stores an increased amount of contaminants.
  • Reduces resistance to oil flow while improving filter efficiency.
  • Withstands up to 5x the normal system operating pressure.
See More

Carquest Premium – Oil Filter (Part No.85365)

Oil Filter

from

$9.99
CARQUEST Premium Oil Filters give you the level of quality and performance from the trusted CARQUEST name.

Product Features:
  • 99.5% efficiency rating at 20 microns
  • Blended media proven for up to 10,000 miles in taxi cab fleet testing
  • High efficiency and durable cellulose/synthetic blended media for longer drain intervals
  • Silicone anti-drainback valve has 3X the durability verses nitrile for engine start-up protection
  • Metal end caps
  • Internally lubricated gasket
  • Precision coil spring relief valve
See More

Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No.090-075CD)

Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack

from

$2.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pilot Point Engine Oil Drain Plug: M12x1.75 Thread, 15 mm Head, 1 Pack (Part No.090-059CD)

Pilot Point Engine Oil Drain Plug: M12x1.75 Thread, 15 mm Head, 1 Pack

from

$5.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack (Part No.090-053CD)

Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack

from

$4.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Oil Drain Plug (Part No.A6110831364DOR)

Oil Drain Plug

from

$10.91
Oil Drain Plug

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Remote Mount Filter Kit - Universal

from

$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:
  • Remote mount filter kit
  • For use when relocation of the oil filter is necessary
  • Comes with all necessary hardware except hoses
See More

ATP – AUTO TRANS FLTR KT (Part No.IL-150)

AUTO TRANS FLTR KT

from

$40.99
AUTO TRANS FLTR KT

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.96085)

Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack

from

$29.99
Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:
  • Guaranteed OE quality form, fit and function
  • Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
  • Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.
See More

ATP – AT FLTR 5/16 D BARB (Part No.JX-151)

AT FLTR 5/16 D BARB

from

$42.99
AT FLTR 5/16 D BARB

Carquest Premium – Full-Flow Lube Spin-on (Part No.85381HD)

Full-Flow Lube Spin-on

from

$13.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)

AT IN-LINE FLTR 5/16

from

$42.99
AT IN-LINE FLTR 5/16

Carquest Premium – PCV Valve (Part No.PCA1114)

PCV Valve

from

$3.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve (Part No.PCA1217)

PCV Valve

from

$6.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve (Part No.PCA1251)

PCV Valve

from

$5.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve (Part No.PCA1302)

PCV Valve

from

$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve (Part No.PCA1215)

PCV Valve

from

$12.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 1988 Mercury Tracer with Top-Quality Filters and PCVs

When it comes to maintaining or upgrading your 1988 Mercury Tracer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Filters and PCVs are key to keeping your Tracer functioning at its best. At Advance Auto Parts, we offer a wide selection of 37 Filters and PCVs for the 1988 Mercury Tracer, designed to meet your needs without breaking the bank. From Oil Filter replacements to Positive Crankcase Ventilation (PCV) Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Filters and PCVs for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Filters and PCVs for your 1988 Mercury Tracer at great prices. Our Filters and PCVs inventory for this model ranges from just $0.68 to $95.99, with an average price of $15.13. Our 37 Filters and PCVs in stock come from 15 trusted brands, so you’re sure to find the right part for your 1988 Mercury Tracer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Mercury Tracer, we stock popular OEM and aftermarket Filters and PCVs from top names like Purolator Dorman, and more. Purolator Filters and PCVs start at just $10.99 and boast an impressive 5 stars average rating from customers. With 663 customer reviews and counting, our 1988 Mercury Tracer Filters and PCVs have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Filters and PCV upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Mercury Tracer is always ready to roll. We’re committed to providing you with everything you need to keep your Tracer in top shape, all in one place. Start shopping confidently below for your 1988 Mercury Tracer!

Best-Selling Oil Filters for 1988 Mercury Tracers

Enhance the driving experience in your Mercury with 25 quality Oil Filter components, starting at $0.68.

Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85334)

Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles

from

$7.79
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:
  • Protection for up to 10,000 miles
  • Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
  • Solid metal end caps are designed to be long lasting
  • Silicone anti-drain back valve for engine start-up protection
  • Heavy-duty steel baseplate provides additional strength to resist leakage
  • Heavy gauge steel canister withstands high pressure operating conditions
  • Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
  • Meets requirements for maintaining new vehicle warranties
See More

PurolatorBOSS – Oil Filter: Ideal for Full Synthetic Oil, Protects up to 20,000 miles (Part No.PBL14461)

Oil Filter: Ideal for Full Synthetic Oil, Protects up to 20,000 miles

from

$15.99
PurolatorBOSS Premium Oil Filters are the next generation in oil filtration, delivering maximum engine protection for up to 20,000 miles. PurolatorBOSS exclusively features SmartFUSION Technology – a full synthetic filter media with reinforced polymer mesh backing for over 99% Dirt Removal Power. Engineered to work well with all oil types and viscosities, especially full synthetic oil, PurolatorBOSS is ideal for the most demanding driving conditions, including frequent towing and hauling, stop and go traffic, long commutes, long idle periods and extreme climates. Its rugged internal construction withstands wear and high mileage with a heavy duty BOSS Steel Casing and an innovative double helix, high-flow center tube for twice the strength of traditional side-seam designed center tubes. Widely available for most vehicles on the road today, PurolatorBOSS combines the latest filter technologies for long-lasting protection and advanced engine performance.

Product Features:
  • Up to 20,000 miles – maximum engine protection
  • Ideal for full synthetic oils
  • Over 99% Dirt Removal Power
  • SmartFUSION Technology – a full synthetic filter media with reinforced polymer mesh backing for expanded dirt holding capacity
  • Silicone anti-drainback valve prevents dry starts
  • BOSS Steel Casing withstands extreme pressure while metal end-caps enhance durability
  • PuroSEAL Gasket made from ethylene-acrylic for maximum leak protection
See More

Dorman – Aluminum Drain Plug Gasket, Fits M14 (Part No.095-147.1)

Aluminum Drain Plug Gasket, Fits M14

from

$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Purolator ONE – Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles (Part No.PL14459)

Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles

from

$10.99
PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.

Product Features:
  • Up to 15,000 miles – advanced engine protection
  • Ideal for all synthetic and high mileage oils
  • 99% Dirt Removal Power
  • High-density synthetic blend media
  • Silicone anti-drainback valve prevents dry starts
  • PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
  • Metal end caps provide stability and integrity for greater wear resistance
See More

Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85334)

Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles

from

$5.49
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:
  • Protection for up to 5,000 miles
  • Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
  • Nitrile anti-drain back valve for engine start-up protection
  • Lathe cut nitrile sealing gasket prevents leaks
  • Double fluted spiral wound center tube allows maximum flow and provides additional strength
  • Solid steel baseplate provides additional strength to resist leakage
  • Meets requirements for maintaining new vehicle warranties
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1004)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Dorman – Help – Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack (Part No.69010)

Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack

from

$4.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Remote Mount Filter Kit - Universal

from

$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:
  • Remote mount filter kit
  • For use when relocation of the oil filter is necessary
  • Comes with all necessary hardware except hoses
See More

Mobil 1 – Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles (Part No.M1-104A)

Oil Filter: Ideal for Synthetic Oil, Protection To 20,000 Miles

from

$15.49
Mobil 1 Extended Performance Oil Filters are built with strong, durable components and are tested and proven to protect 2X as long as auto manufacturers recommended oil change intervals. A high-efficiency synthetic blend media removes over 99% of harmful contaminants keeping oil cleaner, longer. Enhanced nitrile gasket remains pliable to help prevent oil leaks while a durable anti-drain back valve protects against dry starts. Durable, heavy-duty filter canister withstands 9X the normal vehicle oil system operating pressure. These are just some of the advanced technologies that go into making an oil filter that can provide proven protection for up to one full year or 20,000 miles. Meets requirements of the Mobil 1 annual protection limited warranty.

Product Features:
  • Protects for 20,000 Miles or up to 1 year – GUARANTEED
  • Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
  • Removes over 99% of contaminants – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
  • Strong, durable components for long lasting performance
  • Premium O-ring to help prevent leaks
See More

Dorman – Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack (Part No.090-053CD)

Pilot Point Engine Oil Drain Plug: M14-1.50 Thread, 16 mm Head, 1 Pack

from

$4.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

FRAM Force – Spin-on Oil Filter: Ideal For Any Type of Oil Protection to 15,000 miles (Part No.FF9688)

Spin-on Oil Filter: Ideal For Any Type of Oil Protection to 15,000 miles

from

$9.99
FRAM FORCE oil filter is engineered to provide advanced protection for all drivers that experience extreme driving conditions. Coated with a rough non-slip textured surface, Total Grip allows for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter. Its synthetic blend media provides 99% filtering efficiency and protects up to 15,000 miles (24,000 kilometers). 

Product Features:
  • Proven protection for up to 15,000 miles
  • Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
  • Total Grip textured surface for easy install and removal
  • Synthetic blend media provides 99% dirt holding capacity
See More

FRAM Drive – Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No.FD9688)

Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles

from

$5.99
FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in todays engines.  

Product Features:
  • Proven protection for up to 7,500 miles
  • Engineered for use with synthetic or conventional motor oil
  • Precision Relief Valve provides consistent oil flow, even in cold conditions
  • Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
See More

Carquest Premium – Oil Filter 95459: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.95459)

Oil Filter 95459: Ideal for Synthetic Oil, Protection up to 10,000 Miles

from

$11.49
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
See More

Dorman – EZ Drain Engine Oil Drain Plug: M14-1.50 Thread, 21 mm Head, 1 Pack (Part No.092-020)

EZ Drain Engine Oil Drain Plug: M14-1.50 Thread, 21 mm Head, 1 Pack

from

$19.99
Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.

Product Features:
  • Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes.
  • Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
  • Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
  • Corrosion resistant – specially coated to avoid rust for a long service life
See More

Dorman – Oil Drain Plug Gasket – Aluminum Fits M14 (sold by each) (Part No.095-147)

Oil Drain Plug Gasket - Aluminum Fits M14 (sold by each)

from

$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No.090-075CD)

Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack

from

$2.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-810-A)

Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford's Standards

from

$5.79
The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.

Product Features:
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
See More

Dorman – Oil Drain Plug Gaske (Part No.A61201098287DOR)

Oil Drain Plug Gaske

from

$22.97
Oil Drain Plug Gaske

Dorman – Oil Drain Plug (Part No.A61101052886DOR)

Oil Drain Plug

from

$18.61
Oil Drain Plug

Dorman – Oil Drain Plug (Part No.A6110831364DOR)

Oil Drain Plug

from

$10.91
Oil Drain Plug

Dorman – Help – Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm (Part No.65175)

Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm

from

$5.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Oil Drain Plug (Part No.A6110437154DOR)

Engine Oil Drain Plug

from

$5.95
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

Accufit – Oil Drain Plug, M14 x 1.5 (Part No.ODP-00007B)

Oil Drain Plug, M14 x 1.5

from

$5.49
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:
  • Easy Install – Finger-grip wing for ease of installation
  • All plugs have 14mm hex – just one wrench works for all
  • Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
See More

American Grease Stick – Oil Drain Plug (Part No.A61102196641AGK)

Oil Drain Plug

from

$3.50
Oil Drain Plug

Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)

Oil Drain Plug Gaske

from

$0.68
Oil Drain Plug Gaske

Most Popular 1988 Mercury Tracer Positive Crankcase Ventilation (PCV) Parts

Customize your Mercury with 7 Positive Crankcase Ventilation (PCV) Parts products like PCV Valves and PCV Valve Grommets, all priced under $20.99.

Dorman – Help – PCV Grommet – 0.452 In. ID – 1.005 In. OD – 0.647 In. Thickness (Part No.42330)

PCV Grommet - 0.452 In. ID - 1.005 In. OD - 0.647 In. Thickness

from

$4.99
This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles.
  • Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – PCV Valve (Part No.PCA1114)

PCV Valve

from

$3.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1118)

PCV Valve Grommet

from

$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1214)

PCV Valve Grommet

from

$20.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1286)

PCV Valve Grommet

from

$1.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – PCV Valve Grommet (Part No.PCA1179)

PCV Valve Grommet

from

$5.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Autopart International Inc – PCV Valve (Part No.B20402005853API)

PCV Valve

from

$5.62
PCV Valve

Top Picks for 1988 Mercury Tracer Transmission Filters

Upgrade Mercury Tracers with top-quality Transmission Filters parts, including 4 OEM and aftermarket selections for your 1988 model.

ATP – AT IN-LINE FLTR 5/16 (Part No.JX-150)

AT IN-LINE FLTR 5/16

from

$42.99
AT IN-LINE FLTR 5/16

ATP – AUTO TRANS FLTR KT (Part No.IL-150)

AUTO TRANS FLTR KT

from

$40.99
AUTO TRANS FLTR KT

ATP – AT FLTR 5/16 D BARB (Part No.JX-151)

AT FLTR 5/16 D BARB

from

$42.99
AT FLTR 5/16 D BARB

Carquest Premium – Full-Flow Lube Spin-on (Part No.85381HD)

Full-Flow Lube Spin-on

from

$13.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

In-Demand Fuel Filters for 1988 Mercury Tracers

Select from 1 premium Fuel Filters parts for your 1988 Mercury Tracer.

Purolator – Fuel Filter (Part No.F54723)

Fuel Filter

from

$48.99
A clogged fuel filter could lead to contaminants in the engine fluid ¿ a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance. Removes water from the fuel system. Prevents rust and corrosion in your engine. Keeps fuel contaminant free. Replace annually for peak performance. Meets or exceeds OE specifications

Product Features:
  • Removes water from the fuel system
  • Prevents rust and corrosion in your engine
  • Keeps fuel contaminant free
  • Replace annually for peak performance
  • Meets or exceeds OE specifications
See More

Top-Rated Filters and PCVs Brands For Your 1988 Mercury Tracer

Shop for the best-rated brands offering Filters and PCVs and other products for your 1988 Mercury Tracers. Below you’ll find some of our best rated Filters and PCVs from Purolator and Dorman, and more. Filters and PCVs from these brands that fit a 1988 Tracer start at just $1.29 and are rated as high as 5 stars. OEM and aftermarket Filters and PCVs don’t get more top quality, durable, and affordable than from the brands below.

Popular Purolator 1988 Mercury Tracer Filters and PCVs

When it comes to maintaining or upgrading your 1988 Mercury Tracer, using quality Filters and PCVs is essential to ensure durability and a perfect fit. Purolator ticks all of those boxes. We offer a wide selection of Purolator Filters and PCVs, specifically designed for the 1988 Mercury Tracer. With over 3 Purolator brand Filters and PCVs in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99, with an average price of just $25.32. Plus, with over 247 customer reviews and an average rating of 5 stars, you can trust that our Purolator Filters and PCVs will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles
from
$10.99

(171)

Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles

“Purolator is my filter of choice for all of our vehicles.”

Fuel Filter
from
$48.99
This product is not rated

Fuel Filter

“”

Popular Dorman 1988 Mercury Tracer Filters and PCVs

Dorman auto parts is one of the highest quality Filters and PCV brands in the market. Any 1988 Mercury Tracer owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1988 Tracer, Advance Auto Parts carries a full inventory of 12 Dorman Filters and PCVs. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Dorman Filters and PCVs range from $1.29 to $22.97, plus, with more than 6 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Filters and PCVs below will deliver on both quality and value.

Oil Drain Plug Gasket - Aluminum Fits M14 (sold by each)
from
$1.29
This product is not rated

Oil Drain Plug Gasket – Aluminum Fits M14 (sold by each)

“”

EZ Drain Engine Oil Drain Plug: M14-1.50 Thread, 21 mm Head, 1 Pack
from
$19.99
This product is not rated

EZ Drain Engine Oil Drain Plug: M14-1.50 Thread, 21 mm Head, 1 Pack

“”

FAQs for 1988 Mercury Tracer Filters and PCVs

Which Filters and PCVs are best-sellers for 1988 Mercury Tracers?

Out of 37 Filters and PCVs that fit 1988 Mercury Tracers, the following parts are the top sellers:

What’s the price range for 1988 Mercury Tracer Filters and PCVs?

Filters and PCV prices for the 1988 Mercury Tracer start at $0.68 and go up to $95.99 for the most premium parts.

What’s the average price of a Filters and PCV for a 1988 Mercury Tracer?

The average price for Filters and PCVs for the 1988 Mercury Tracer is $15.13. Keep in mind the variety of part types within our Filters and PCV category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Filters and PCVs for other Mercury Tracer model years?

Yes, we currently carry Filters and PCVs for 10 model years of Mercury Tracers between 1989 and 1999. Filters and PCVs are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Filters and PCVs for my 1988 Mercury Tracer?

The cheapest 1988 Mercury Tracer Filters and PCVs we carry in stock are:

What are the top-rated Filters and PCVs that fit the 1988 Mercury Tracer?

Out of 663 reviews by customers, our 1988 Mercury Tracer Filters and PCVs have an average customer rating of . These are some of the highest-rated Filters and PCV types for the 1988 Mercury Tracer and their top-rated products:

What types of Filters and PCVs do you sell for my 1988 Mercury Tracer?

Can I get help with 1988 Mercury Tracer Filters and PCV orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Filters and PCVs and more.

What is your return policy for Mercury Tracer Filters and PCVs?

Advance Auto Parts keeps returns simple. For new Mercury Tracer Filters and PCVs and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.